Unpacking the Server

Hewlett-Packard shipping containers protect their contents under normal shipping conditions. After the equipment arrives, carefully inspect each carton for signs of shipping damage. If damage is found, document the damage with photographs and contact the transport carrier immediately.

If the equipment has any damage, a damage claim form must be obtained from the shipping representative. The customer should complete the form and return it to the shipping representative.

Unpacking the Server




	WARNING! Because a filled hp Integrity cx2600 shipping container may weigh as much as 95 pounds (43 kilograms), two people should lift the container together. Do not lift or carry the HP Server alone. The unit should be transported on a cushioned, wheeled cart or carrier. Failure to heed this warning could result is serious personnel injury.

Removing the HP Server from the Shipping Container




	WARNING! The hp Integrity cx2600 Server may weigh as much as 95 pounds (43 kilograms). Two people are required to lift the unit and remove packing material. Failure to heed this warning could result in serious personal injury or damage to the HP Server.

The hp Integrity cx2600 Server is shipped in a standard container, but is cushioned against shock. Open the top of container and lift the HP Server and packing material from the box. Place the unit on a level work surface and remove the packing material.

Installing the HP Server into a Rack

HP Rack

Any hp Integrity cx2600 Server that is to be installed into a rack is shipped with a mounting kit or equipment slides. With every mounting kit and slides comes an installation guide. Follow the steps in this installation guide to determine where and how to place the server into the rack.

Non-HP Rack

There is a guide for evaluating the installation of HP equipment in non-HP racks. This document should be utilized when there is a need to evaluate and qualify whether any HP equipment can be installed, maintained, and serviced in a non-HP rack. The guide is located on the Web at: http://www.hp.com/racksolutions.

Once there, select “mounting information” from the menu on the left side, then select the guide titled Mounting in Non-HP Racks.

Unpacking the Server

Technical documentation

» Table of Contents

» Index