Input Power

The hp Integrity cx2600 server comes with two power supplies installed: each powered from its own power cable. The input for each connector is rated for -48 VDC (-40 to -72 VDC) at up to 15 amps (max.). (See Figure 5-2 “hp Integrity cx2600 Server (rear view)” for power supply terminals/connections.) The server will function normally with only one power supply installed, but N+1 redundancy requires that both power supplies be used during normal operations. Under normal operating conditions, the two power supplies share the load.

Figure 5-1 hp Integrity cx2600 Power Supply (rear view)

	WARNING! Voltages and hazardous energy can be present at various locations within the server whenever a power source is connected. This hazard is present even when the power switch is in the off position. Failure to observe this warning could result in personal injury or damage to equipment.