 |
» |
|
|
|
To verify the
adapter installation, enter the command:
# ioscan -f Verify that the following
drivers appear for each installed adapter. If all drivers display,
proceed to the next section, Verifying Connectivity. The ioscan output might look like the following. The third column
represents the hardware path of the slot in which the adapter is
installed. This path will be different for each installed adapter
port. Table 1-2 ioscan -f Output Class | I | H/W Path | Driver | S/W State | H/W Type | Description |
|---|
fc | 4 | 0/0/10/1/0 | fcd | CLAIMED | INTERFACE | HP AB378-60001 4Gb Single Port PCI/PCI-X Fibre Channel
Adapter (FC Port 1) |
If the ioscan output is similar
to the following: fc 0/0/10/1/0 UNCLAIMED UNKNOWN |
HP-UX detected the adapter, but the drivers are not properly
loaded. If the correct driver is installed and the adapter
is not listed in the ioscan output, contact HP for assistance.
|
Printable version
