Verify
that the correct drivers appear for each installed adapter. If all
drivers display, proceed to the next section, “Verifying Connectivity”.
Sample ioscan output:
ba 3 0/3 gh2p CLAIMED BUS_NEXUS Local Bus Adapter
ba 4 0/3/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
fc 3 0/3/0/0/0/0 fclp CLAIMED INTERFACE HP AD355-60001 4Gb PCIe 2-port Fibre Channel Adapter
/dev/fclp3
fcp 3 0/3/0/0/0/0.1 fclp_fcp CLAIMED INTERFACE FCP Domain
ext_bus 134 0/3/0/0/0/0.1.27.255.13 fclp_vbus CLAIMED INTERFACE FCP Device Interface
target 17 0/3/0/0/0/0.1.27.255.13.3 tgt CLAIMED DEVICE
disk 236 0/3/0/0/0/0.1.27.255.13.3.0 sdisk CLAIMED DEVICE HPQ BF03658242
Port 2:
fc 5 0/3/0/0/0/1 fclp CLAIMED INTERFACE HP AD355-60001 4Gb PCIe 2-port Fibre Channel Adapter
/dev/fclp5
fcp 0 0/3/0/0/0/1.1 fclp_fcp CLAIMED INTERFACE FCP Domain
ext_bus 138 0/3/0/0/0/1.1.27.255.13 fclp_vbus CLAIMED INTERFACE FCP Device Interface
target 3 0/3/0/0/0/1.1.27.255.13.3 tgt CLAIMED DEVICE
disk 248 0/3/0/0/0/1.1.27.255.13.3.0 sdisk CLAIMED DEVICE HPQ BF03658242
/dev/dsk/c138t3d0 /dev/rdsk/c138t3d0 |
 |
|
| |
|
 | NOTE: The third column represents the hardware path
of the slot in which the adapter is installed. The hardware path is
different for each installed adapter. |
|
| |
|
If an installed Fibre Channel adapter requires
the fclp driver and the appropriate driver does
not appear as shown above, the driver is not installed.
If the ioscan output is similar
to the following:
fc 0/0/2/1/0 UNCLAIMED UNKNOWN |
HP-UX detected the adapter, but the drivers are not properly loaded.
If the correct driver is installed, but the adapter
does not show in the ioscan output, the driver is not recognizing
the adapter.
Printable version
