 |
» |
|
|
|
|  | |
The HP 9000 Internet Services product combines services developed by the
University of California at Berkeley (UCB), Cornell University,
Carnegie-Mellon University (CMU), and Hewlett-Packard. ARPA Services include the set of services developed by UCB for the
Advanced Research Projects Agency (ARPA): ftp, and telnet. ARPA
services are used to communicate with HP-UX, UNIX, and non-UNIX
systems. Berkeley Services include the set of services developed by UCB to
implement UCB protocols: BIND, sendmail, finger, the rexec library, rcp, rlogin, remsh, ruptime, rwho, and rdist. Berkeley Services are
used to communicate with HP-UX or UNIX systems. The Internet Services product also contains several other services: BOOTP, tftp, rbootd, NTP, and DDFA. For more information on the Internet Services, see TCP/IP Network
Administration by Craig Hunt, published by O'Reilly and Associates. For more information on DNS and BIND, see DNS and BIND, by Paul
Albitz and Cricket Liu, published by O'Reilly and Associates, Inc. For more information on sendmail, see sendmail, by Bryan Costales with
Eric Allman and Neil Richert, published by O'Reilly and Associates, Inc. Table 1-1 “The Internet Services” lists the Internet Services. Table 1-1 The Internet Services ftp | Copies files among hosts on the network that support Internet Services. For more information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 1 ftp or man 1M ftpd. | telnet | Allows you to log onto a remote host that supports Internet Services. For more information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 1 telnet or man 1M telenetd. | sendmail | Works with your network's mailers (for example, elm and mailx) to perform
internetwork mail routing among UNIX and non-UNIX hosts on the network. For more information, see Chapter 5 “Installing and Administering sendmail”, or type man 1M sendmail.
| BIND | Implements the Domain Name System (DNS). The Berkeley Internet Name Domain (BIND) Service, is a distributed database service that resolves host names and facilitates internetwork mail. For more information, see Chapter 4 “Configuring and Administering the
BIND Name Service”, or type man 1M named. | finger | Allows users to look up information about other users on the network. For more
information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 1 finger or man 1M fingerd.
| BOOTP | Allows some diskless systems, such as the HP 700/X terminal, to load network and
configuration parameters from a server on the network. For more information, see Chapter 6 “Configuring TFTP and BOOTP
Servers”, or type man 1M bootpd.
| tftp | Used with bootp to allow some diskless systems, such as the HP 700/X terminal, to
transfer files containing bootstrap code, fonts, or other configuration information. For more information, see Chapter 6 “Configuring TFTP and BOOTP
Servers”, or type man 1 tftp or man 1M tftpd.
| gated
| Dynamically determines routing over internets from one node to another. For more
information, see Chapter 9 “Configuring gated”, or type man 1M gated.
| mrouted | Implements the Distance-Vector Multicast Routing Protocol (DVMRP) for routing
IP multicast datagrams. For more information, see Chapter 10 “Configuring mrouted”, or type man 1M mrouted.
| NTP | Maintains the local clock on an HP-UX workstation in agreement with
Internet-standard time servers. For more information, see Chapter 8 “Configuring NTP”, or type man 1M xntpd.
| rexec | A library routine used to execute commands on a remote UNIX host on the network.
For more information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 3N rexec or man 1M rexecd.
| rcp | Allows you to transfer files between UNIX hosts on the network. For more
information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 1 rcp.
| rlogin | Allows you to log onto a remote UNIX host. For more information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 1 rlogin or man 1M
rlogind. | remsh | Allows you to execute commands on a remote UNIX host. remsh is the same
command as rsh in 4.3 BSD. For more information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 1 remsh or man 1M remshd.
| ruptime | Lists information about specified UNIX nodes that are running the rwhod daemon. ruptime is not supported over X.25 networks or networks using the PPL (SLIP)
product. For more information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 1 ruptime or man 1M rwhod.
| rwho | Lists information about specified UNIX nodes that are running the rwhod daemon. rwho is not supported over X.25 networks or networks using the PPL (SLIP)
product. For more information, see Chapter 2 “Installing and Configuring Internet Services”, or type man 1 rwho or man 1M rwhod.
| rdist | Distributes and maintains identical copies of files across multiple hosts. For more
information, see Chapter 11 “
Using rdist”, or type man 1 rdist.
| rbootd | RMP is an HP-proprietary boot and file transfer protocol used in early Series 700 workstations and in the Datacommunications and Terminal Controllers (DTC/9000).
For more information, see Chapter 6 “Configuring TFTP and BOOTP
Servers”, or type man 1M rbootd.
| whois
| Lists information about specified people and organizations listed in the Network Information Center (NIC) database. A direct socket connection to the NIC is
required. For more information, type man 1 whois. | DDFA
|
Allows access from HP-UX systems and user-written applications to HP DTCs. For
more information, see the DTC Device File Access Utilities Manual.
| Secure Internet
Services | An optionally installable product that includes the following services: ftp, rcp, remsh, rlogin and telnet. The alternate versions of these services have been
enhanced to incorporate Kerberos Version 5 Beta 4 authentication and authorization. For more information, see Chapter 3 “Secure Internet Services”.
|
|
Printable version
