Selecting the Root Disk

If you have more than one target disk, after you have finished with the Install Welcome screen, you will see the Select System Root Disk screen. If you have only one disk, skip to “Viewing or Modifying Configuration”.

Figure 2-13 Title not available (Selecting the Root Disk )




	Shortcuts : Tips for using the install interface: If you prefer to use the keyboard to manipulate the Install interface, you can do so by typing the underlined letter of an item (such as "C" for `C`ancel). For help, choose the Help button at the bottom of each screen. Press f1 or CTRL-f for context-sensitive help. Use CTRL-k to get navigation key help.

Select your root disk by using the arrow keys to highlight the line for that disk. (In the above example, the system found two disks.)
With the desired disk highlighted, choose it by using Tab to select OK and press Enter.
- If the disk you want is not shown, make sure it is turned on and connected to the system. You may select Cancel to exit this menu. If you do this, you will be presented with the option to restart the installation at the beginning of the configuration utility or scan the system again for disks.

Selecting the Root Disk

Technical documentation

» Table of Contents

» Index