Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
Configuring HP-UX For Peripherals: HP 9000 Computers

Chapter 3 Configuring Terminals and Modems

» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Index

This chapter contains the procedures for configuring terminals and modems to serial (RS-232-C) ports.

For HP-UX to communicate with a terminal or modem, the following conditions must be met:

  • The serial device driver required to communicate with the device must be part of the kernel.

  • The terminal or modem must be physically attached and configured to the port.

  • A device special file must be created to communicate through the port.

  • A getty process must be run against the (terminal) port to solicit logins.

For procedures on configuring terminals and modems attached to HP terminal controllers (DTCs) on the network, refer to the following resources:

  • Using the HP DTC Manager/UX (part number J2120-62000), for managing terminals and modems from a host HP-UX system.

  • Using HP OpenView DTC Manager (part number D2355-90001), for managing terminals and modems from a personal computer.

  • documentation accompanying your third-party terminal server.

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2000 Hewlett-Packard Development Company, L.P.