A system running HP-UX 10.x, 11.0, or
11i can use the Ignite-UX server across a gateway if the target
system is booted via the bootsys command. If the system is booted manually, it will need
a helper system to help it boot across a gateway, and enabling the
target system to perform this to the local boot-helper system:
boot lan.IP_address install
This chapter describes how to configure the boot-helper system.
To boot HP-UX across a gateway, you need a system on the local
subnet to provide the target with a minimum core kernel. The helper
system can run either HP-UX 10.x, 11.0 or 11i.
The setup is much simpler if the helper system is running HP-UX
10.x, 11.0 or 11i.
Printable version
