 |
» |
|
|
|
A- additional network interfaces, System Tab
- advanced tab, Advanced Tab
- at(1), Scheduling Installations
- audience
for this guide, About This Guide
- auto_parms, Details of the DHCP Services
- automatic
installations
- example config file, Specifying Defaults in the config.local File
- overview, Automating Installations
- scheduling, Scheduling Installations
- setting local time zone, Setting the Local Time Zone
- specifying defaults, Specifying Defaults in the config.local File
- using config files for, Specifying Defaults in the config.local File
- with bootsys, Starting an Automatic Installation with bootsys
B- backup patch files, Avoiding Backup Patch Files
- basic tab screen, Basic Tab
- BOOT ADMIN menu, Booting Current Workstations and Servers
- boot
sequence, HP 9000 systems, System Bootup Sequence
- boot-helper
system, Using a Boot-Helper System
- booting
- clients via the network, Booting Client Systems from the Network
- install kernel paths,network, Booting Current Workstations and Servers
- older workstations, Booting Older Series 700 Workstations
- bootptab
- alternative to DHCP, Using bootptab as an Alternative to DHCP
- bootsys
- automatic installations, Starting an Automatic Installation with bootsys
- non-interactive installations, Non-Interactive Installation Using bootsys
C- CD-ROM, building an install media, Building an Install CD-ROM
- changing file system size, Adjusting File System Size
- client actions, I: Starting Ignite-UX
- client icons, I: Starting Ignite-UX
- client status screen, I: Starting Ignite-UX
- client status, scanning for, I: Starting Ignite-UX
- commands, Ignite-UX, Ignite-UX Commands and Online Documentation
- common
configuration, Solving Problems with Ignite-UX
- config files
- changes for system recovery, Making config File Additions
- custom install media, Important Config Files
- examples, Example Config Files
- overview, config Files
- configuration for install
- advanced, Advanced Tab
- basic, Basic Tab
- file system, File System Tab
- software, Software Tab
- system, System Tab
- configuring boot
IP addresses, J: Configuring Server and Session Options
- configuring session options, J: Configuring Server and Session Options
- control_from_server, Why Use Custom Install Media?
- core media recovery, Expert Recovery Using the Core Media
- procedures, Automated Recovery Procedures
- custom
install media
- accessing a serial tape depot, Accessing the Serial Depot on a DDS Tape
- accessing CD-ROM archive, Building an Install CD-ROM
- accessing tape, Accessing a DDS Tape Archive
- building, Building Example Install Media
- CD-ROM, Building an Install CD-ROM
- config files, Important Config Files
- overview, Why Use Custom Install Media?
- tape, The Golden Image
- tape format, The Golden Image
- custom installation scripts, Advanced Tab
- custom
installations, Ignite-UX Features
- customizing installations, Customizing Your Installation
D- date, setting, System Tab
- day, setting, System Tab
- DHCP
- adding addresses, J: Configuring Server and Session Options
- design information, Using bootptab as an Alternative to DHCP
- dhcpclient, Details of the DHCP Services
- document information, Using bootptab as an Alternative to DHCP
- enabling,using SAM, Details of the DHCP Services
- enabling,using text editor, Enabling DHCP on a System Not Initially Configured with DHCP
- example uses, DHCP Usage Examples
- networking,parameters, Details of the DHCP Services
- server,configuring, Configuring for a DHCP Server, Using bootptab as an Alternative to DHCP
- server,finding, Details of the DHCP Services
- server,setup procedure, Setting Up a DHCP Server
- using bootptab, Using bootptab as an Alternative to DHCP
- variables, Enabling DHCP on a System Not Initially Configured with DHCP
- Web site, Using bootptab as an Alternative to DHCP
- dhcpclient, Details of the DHCP Services
- diagnosing
errors, Errors and Warnings
- disks
- adding and removing, File System Tab
- renaming file-system structure, File System Tab
- setting parameters, File System Tab
- DNS
- configuring, System Tab
- screen, System Tab
- documentation
- computing swap space, File System
- Ignite-UX papers and presentations, Documentation and Training
- Managing HP-UX Software with SD-UX, Installing Patches with Ignite-UX
I- ignite
- client-server screen, I: Starting Ignite-UX
- starting, I: Starting Ignite-UX
- Ignite-UX
- commands, Ignite-UX Commands and Online Documentation
- FAQ, Documentation and Training
- hardware requirements, Ignite-UX Hardware Requirements
- interface, Viewing and Printing a Manifest
- manpages, Ignite-UX Commands and Online Documentation
- obtaining software, A: Obtain Ignite-UX Software
- overview, Ignite-UX Overview
- RAM requirement, Ignite-UX Hardware Requirements
- training, Documentation and Training
- with mirrored disks, Documentation and Training
- Ignite-UX server
- adding boot IP addresses, H: Set an Initial Ignite-UX Server Configuration
- installing, A: Obtain Ignite-UX Software
- installing minimal filesets, F: Installing Minimal Ignite-UX Filesets
- problems, Ignite-UX Server Problems
- troubleshooting, Ignite-UX Server Problems
- Ignite-UX
web site, Documentation and Training
- INDEX files
- automatic installations, Starting an Automatic Installation with bootsys
- combining config files, Combining config Files via INDEX Entries
- examples, Combining config Files via INDEX Entries
- install
- (pre-configured) Go!, Functions Available on All Tabs, Executing the Installation: Go!
- server,searching for, Booting Older Series 700 Workstations
- using a boot-helper system, Install Using a Boot-helper
- using defaults, Functions Available on All Tabs
- install depot,
defining, Example Config Files
- install kernel
- boot paths,network, Booting Current Workstations and Servers
- install media, custom, Why Use Custom Install Media?
- install params, setting dynamically, Setting Install Parameters Dynamically
- installation scripts, Advanced Tab
- installing client systems, methods, Installing HP-UX with Ignite-UX on Clients Locally, Methods of Installing Client Systems
- Installing
client systems, server method, Installing from the Ignite-UX Server
- installing from media, troubleshooting, Installing from Media
- installing Netscape, Installing Netscape® as a Post-config Step
- installing systems, troubleshooting, Installing Systems with Ignite-UX
- instl_adm, Specifying Defaults in the config.local File, Setting Install Parameters Dynamically, Details of the DHCP Services
- instl_adm(4), config Files
- IP address
- finding, Booting Current Workstations and Servers
- setting with DHCP, Details of the DHCP Services, Using bootptab as an Alternative to DHCP
M- make_boot_tape
- recovering a system not on network, System Recovery Questions and Answers
- tape recovery via network, Tape Recovery with make_net_recovery
- make_medialif
- tape recovery via network, Tape Recovery with make_net_recovery
- make_net_recovery, System Recovery via Network and Tape
- cloning systems, Notes on Cloning Systems
- overview, Archive Contents
- make_recovery
- cloning systems, Notes on Cloning Systems
- duplicating a system, Creating a Bootable Recovery Tape
- overview, System Recovery via Network and Tape
- make_sys_image
- cloning systems, Notes on Cloning Systems
- make_tape_recovery, System Recovery
- managing
network printers, Managing Network Printers
- manifest, Viewing and Printing a Manifest
- manifest files, Viewing and Printing a Manifest
- messages
- errors, Troubleshooting
- minimal filesets for Ignite-UX
server, F: Installing Minimal Ignite-UX Filesets
- mirrored disks, with Ignite-UX, Documentation and Training
- multiple-archive
formats, Ignite-UX Features
N- NetInstall, removing, B: Install Ignite-UX Software
- Netscape, installing with post-install
scripts, Installing Netscape® as a Post-config Step
- network
- booting clients, Booting Client Systems from the Network
- configuring destination IP, System Tab
- configuring gateway, System Tab
- configuring interfaces, System Tab
- finding address, Booting Current Workstations and Servers
- setting address with DHCP, Details of the DHCP Services
- temporary parameters, Details of the DHCP Services
- network recovery, troubleshooting, Network Recovery
- networking requirements, Network Requirements
- NFS Diskless support, Ignite-UX Hardware Requirements
- NIS
- configuring, System Tab
- screen, System Tab
- nslookup, System Tab
O- OnlineDiag LIF volumes, restoring, Restoring OnlineDiag LIF Volumes
- optional apps, adding, E: Add Optional Applications
- OS archives
- configuring server for, Configuring Ignite-UX Server to Recognize the OS Archive
- creating, Creating an OS Archive
- enabling target system, Enable the Target System
- installing from, Installing from System Images
- installing on target, Install the OS Archive on the Target
- non-core, possible corruption, E: Add Optional Applications
- overview, Installing from System Images
- restoring OnlineDiag LIF volumes, Restoring OnlineDiag LIF Volumes
- troubleshooting, Installing from Archives (golden images)
P- parameters
- advanced, File System Tab
- disk, File System Tab
- file system, File System Tab
- system, System Tab
- patches
- avoiding backup files, Avoiding Backup Patch Files
- installing, Creating a Patch Depot
- patch depot creation, Creating a Patch Depot
- PATH, updating, C: Update PATH
- peripherals
supported, Supported Peripherals
- post-install
scripts, Using Post-installation Scripts
- print_manifest, Viewing and Printing a Manifest
- pull
installations, Solving Problems with Ignite-UX
- push
installations, Solving Problems with Ignite-UX
R- RAM space
- install requirements, Ignite-UX Hardware Requirements
- record keeping,manifest, Viewing and Printing a Manifest
- recovery
- archive configuration policies, Archive Configuration Policies
- bootable recovery tape, Creating a Bootable Recovery Tape
- core media, Expert Recovery Using the Core Media
- creating network archive, Creating a Recovery Archive via the Network and Tape
- examples, More Examples
- expert, Expert Recovery Using the Core Media
- large file support, Large File Support
- procedures (core media), Automated Recovery Procedures
- system, System Recovery via Network and Tape, Creating a Recovery Archive via the Network and Tape
- system tools, Comparing Features
- tape recovery via network, Tape Recovery with make_net_recovery
- requirements
- hardware, Ignite-UX Hardware Requirements
- networking, Network Requirements
- run_ui, Why Use Custom Install Media?
S- S700 systems
- IP address, Booting Current Workstations and Servers
- scheduling automatic installations, Scheduling Installations
- screens
- advanced disk params, File System Tab
- advanced file system params, File System Tab
- advanced tab, Advanced Tab
- advanced volume group params, File System Tab
- advanced volume layout, File System Tab
- basic tab, Basic Tab
- BOOT ADMIN, Booting Current Workstations and Servers
- client actions pulldown, Configuring the Installation
- client status, I: Starting Ignite-UX
- configuring boot IP addresses, J: Configuring Server and Session Options
- DNS, System Tab
- file system tab, File System Tab
- ignite (client icons), I: Starting Ignite-UX
- install client menu, Installing from the Ignite-UX Server
- network interface(s), System Tab
- NIS, System Tab
- server config, J: Configuring Server and Session Options
- session options, J: Configuring Server and Session Options
- set root password, System Tab
- set time zone, System Tab
- software tab, Software Tab
- statuc routes, System Tab
- system tab, File System, System Tab
- view menu, I: Starting Ignite-UX
- XNTP, System Tab
- scripts,
post-install, Using Post-installation Scripts
- searching
- for install server, Booting Older Series 700 Workstations
- for net address, Booting Current Workstations and Servers
- server
- configuring options, J: Configuring Server and Session Options
- installation tasks, Installation Overview
- searching for, Booting Older Series 700 Workstations
- setting up, Ignite-UX Hardware Requirements
- tools for setup, Ignite-UX Hardware Requirements
- server,install
- searching for, Booting Older Series 700 Workstations
- ServiceControl
Manager support, Ignite-UX Features
- set root password, System Tab
- set time zone, System Tab
- set_parms, System Tab
- setting install params dynamically, Setting Install Parameters Dynamically
- size, file system
- adjusting, Adjusting File System Size
- size,disk
- Ignite-UX requirement, Ignite-UX Hardware Requirements
- software
- HP-UX,selecting, Basic Tab
- starting ignite, I: Starting Ignite-UX
- static routes
- configuring, System Tab
- statuc routes
- screen, System Tab
- superceded patches, Avoiding Problems with Superseded Patches
- sw_sel, Important Config Files
- sw_source, Important Config Files
- swap
space, specifying, File System
- swinstall, troubleshooting, Running swinstall
- system installation status, I: Starting Ignite-UX
- system
recovery, System Recovery via Network and Tape
- cloning systems, Notes on Cloning Systems
- config files, Making config File Additions
- create a network archive, Creating a Recovery Archive via the Network and Tape
- expert recovery overview, Expert Recovery
- installing critical root files only, Installing Critical Root Files Only
- network recovery, Overview
- overview, Overview
- rebuilding bootlif only, Rebuilding the ''bootlif'' Only
- recovering a system not on network, System Recovery Questions and Answers
- replace the kernel only, Replacing the Kernel Only
- retaining good archives, Retaining "Known-good" Archives
- selecting files to recover, Selecting File Systems During Recovery
- tape recovery via network, Tape Recovery with make_net_recovery
- tools comparison, Archive Contents
- troubleshooting questions, System Recovery Questions and Answers
- verify archive contents, Verifying Archive Contents
- verify recovery, Verifying Archive Results
- system recovery tools, Comparing Features
- system tab, File System
T- tab
- advanced, Advanced Tab
- basic, Basic Tab
- file system, File System Tab
- software, Software Tab
- system, System Tab
- tape depot, accessing, Accessing the Serial Depot on a DDS Tape
- tape recovery
- creating boot tape, Creating a Bootable Recovery Tape
- duplicating tapes, Duplicating make_tape_recovery Tapes
- troubleshooting, Media Recovery
- tasks
- adding boot IP addresses, H: Set an Initial Ignite-UX Server Configuration
- adding DHCP addresses, J: Configuring Server and Session Options
- adding ignite to NFS server, G: Start Ignite-UX for the First Time
- adding optional apps., E: Add Optional Applications
- archive creation with ignite, Archive Creation Steps
- automatic installations, Specifying Defaults in the config.local File
- automatic system recovering, System Recovery Questions and Answers
- client recovery via the network, More Examples
- cloning systems, Cloning a System Using make_net_recovery
- configuring client installations, Configuring the Installation
- configuring server for OS archive, Configuring Ignite-UX Server to Recognize the OS Archive
- configuring server options, J: Configuring Server and Session Options
- configuring session options, J: Configuring Server and Session Options
- create bootable archive tape via ignite-ux server, Create a Bootable Archive Tape via the Network
- create system recovery archive from ignite-ux server, Create a Recovery Archive from the Ignite-UX Server
- creating a patch depot, Creating a Patch Depot
- creating an OS archive, Creating an OS Archive
- duplicating a system, Creating a Bootable Recovery Tape
- enabling DHCP, Enabling DHCP on a System Not Initially Configured with DHCP
- installing Ignite-UX server software, B: Install Ignite-UX Software
- intitial ignite startup, G: Start Ignite-UX for the First Time
- NFS server, adding ignite, G: Start Ignite-UX for the First Time
- obtaining Ignite-UX software, A: Obtain Ignite-UX Software
- preparing clients for installation, Preparing Clients for Installation
- recover IA clients via the network, Recovering via the Network for IA Clients
- recover PA clients via the network, Recovering via the Network for PA Clients
- recovering a minimal OS, Creating a Bootable Recovery Tape
- recovering a root disk, Creating a Bootable Recovery Tape
- recovering from the client, More Examples
- server installation, Installation Overview
- set up software source, D: Set Up or Update the Software Source
- setting install params dynamically, Setting Install Parameters Dynamically
- setting up a boot-helper system, Setting Up the Boot-Helper
- setting up a DHCP server, Setting Up a DHCP Server
- starting ignite, I: Starting Ignite-UX
- updating PATH, D: Set Up or Update the Software Source
- temporary network parameters, Details of the DHCP Services
- terminal user interface (TUI), Installing from the Ignite-UX Server
- time zone
- setting, System Tab
- setting with automatic install, Setting the Local Time Zone
- tools
- setting up server, Ignite-UX Hardware Requirements
- training, available, Documentation and Training
- troubleshooting
- Ignite-UX server problems, Ignite-UX Server Problems
- installing from archives, Installing from Archives (golden images)
- installing from media, Installing from Media
- installing systems, Installing Systems with Ignite-UX
- large systems, Troubleshooting Large Systems
- network recovery, Network Recovery
- swinstall, Running swinstall
- tape recovery, Media Recovery
|
Printable version
