Loading the analysis tools and documentation files onto your
9.x system will not alter your system, but
you will need sufficient disk space. The following table shows approximate
sizes of the filesets in the tools package, which is labelled "Upgrade
Tools". /etc/update
will show you the exact sizes of the filesets.
Table 4-2 Fileset
Information
Content | Fileset | Size (Kb) |
|---|
Analysis (pre-upgrade) tools | UPG-ANALYSIS | 4304 |
Analysis tools manpages | UPG-MAN | 58 |
Japanese manpages | UPG-JPN-E-MAN | 56 |
Japanese manpages | UPG-JPN-S-MAN | 56 |
snoop
tools | UPG-SNOOP | 2743 |
upgrade
tools | UPG-UPDATE | 2607 |
upgrade
commands | UPG-CMDS | 6265 |
Release notes, white papers | UPG-DOC | 941 |
Software Distributor program | SD-AGENT | 5251 |
Software Distributor commands | SD-CMDS | 15833 |
Software Distributor text | SD-DATA | 244 |
Software Distributor manpages | SD-MAN | 220 |
The following table shows the names of the online documents
that were shipped in the "Upgrade Tools" package, and the filename,
size, and format of each. All the files will be installed into /etc/newconfig/10RelNotes
on a 9.x system. These documents were not shipped to you in hard
copy; to get a hard copy, use the retrieval and printing instructions
that follow the table.
Table 4-3 Online
Documents Information
Document | Size (Kb) | Format | Filename |
|---|
Release Notes for HP-UX 10.10 | 638 | ASCII | 10.10RelNotes |
HP-UX 10.0 File System Layout | 208 81 | PostScript ASCII | filesys.ps
filesys.txt |
HP-UX 10.01 Patch List | 55 | ASCII | sw_ patches.1001.txt |
HP-UX 10.10 Patch List | 65 | ASCII | sw_ patches.1010.txt |
NFS Diskless Concepts and
Administration | 514 | Postscript | NFS_Concepts_ Admin.ps |
To load the tools and online documents
from the "Upgrade Tools" package onto a 9.x system, do the following:
Put the "Upgrade Tools" tape or CDROM into the drive.
Log into your 9.x system as root.
Run /etc/update.
Choose Select All Filesets on the Source Media.
After all of the files are loaded, remove the tape
or CDROM from the drive and store it in a safe place.
To retrieve the online documents from tape
before you load the tools, do the following:
Write-protect the tape according to its documentation.
Insert the tape into the drive.
cd
to the root directory.
Load the documents onto your system:
tar -xvf /dev/rmt/0m UPG-DOC |
or run /etc/update
and load the UPG-DOC
fileset.
cd
to the /etc/newconfig/10RelNotes
directory, which contains the release notes and white paper files.
To print the documents, use the lp
command (and the -ops
option if you are printing filesys.ps
or NFSD_Concepts_Admin.ps).
To load the tools from a CDROM onto
a 9.x system: Use /etc/update
to load the UPG-DOC
fileset.
Printable version
