|
|
United States-English | |
|
|
 |
|
Upgrading from HP-UX 9.x to 10.x: HP 9000 Computers > Chapter 4 Pre-Upgrade Tasks for All 9.x Systems
Certifying Applications |
|
|
Well before upgrading to 10.01, you need to make sure that your critical applications are supported on 10.x, and, if you are going to 10.10, that they are available for that release as well. Whether or not you use the tools described in Chapter 5 “Converting Code and Scripts ” to create 10.01 versions of your scripts and in-house applications, you still need to run your normal regression tests and certification procedures on these applications to qualify them for 10.01 or 10.10, just as you did when you upgraded from 8.x to 9.x. If possible, do not wait until after you have upgraded a production system to run these tests; do the certification on an upgraded test machine, so that the applications are ready to run as soon as the production system upgrade is complete. At the time this manual went to press, the following HP applications had been certified on 10.01, but only for systems that could be upgraded with the tools provided with the initial release of 10.01; that is, these applications may not work correctly in NFS Diskless clusters, systems upgraded from 9.07, and other systems listed under “New Upgrade Capabilities ”. Contact your HP Sales Representative (SR) for more information.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
 Printable version |
|
|
|
|
|
|||||||||||||||
|
|||||||||||||||
