HP-UX Reference

Table of Contents

Preface

Typographical Conventions

Command Syntax

Function Synopsis and Syntax

Publishing History

HP Encourages Your Comments

I Section 1: User Commands

Introduction

intro(1) - introduction to command utilities and application programs

A

adb(1) - absolute debugger

adjust(1) - simple text formatter

admin(1) - create and administer SCCS files

alias(1) - standard and restricted POSIX.2-conformant command shells — see sh-posix(1)

answer(1) - phone message transcription system

ar(1) - create and maintain portable archives and libraries

as(1) - assembler

as_ia(1) - assembler for Integrity systems

as_pa(1) - assembler for PA-RISC systems

asa(1) - interpret ASA carriage control characters

at(1) - execute batched commands immediately or at a later time

attributes(1) - describe an audio file

awk(1) - pattern-directed scanning and processing language

B

banner(1) - make posters in large letters

basename(1) - extract portions of path names

batch(1) - execute batched commands immediately or at a later time — see at(1)

bc(1) - arbitrary-precision arithmetic language

bdiff(1) - diff for large files

bg(1) - standard and restricted POSIX.2-conformant command shells — see sh-posix(1)

bs(1) - a compiler/interpreter for modest-sized programs

C

cal(1) - print calendar

calendar(1) - reminder service

caliper(1) - measure, report, and analyze program performance data

cancel(1) - print/alter/cancel requests on an LP destination — see lp(1)

cat(1) - concatenate, copy, and print files

cc_bundled(1) - bundled C compiler

ccat(1) - compact and uncompact files, and cat them — see compact(1)

cd(1) - change working directory

cdc(1) - change the delta commentary of an SCCS delta

chacl(1) - add, modify, delete, copy, or summarize access control lists (ACLs) of files

chatr(1) - change program's internal attributes

chatr_ia(1) - change program's internal attributes on Integrity systems

chatr_pa(1) - change program's internal attributes on PA-RISC systems

checknr(1) - check nroff/troff files

chfn(1) - change user information; used by finger

chgrp(1) - change file owner or group — see chown(1)

chkey(1) - change user's secure RPC key pair

chmod(1) - change file mode access permissions

chown(1) - change file owner or group

chsh(1) - change default login shell

ci(1) - check in RCS revisions

ckconfig(1) - verify the path names of all the FTP configuration files.

cksum(1) - print file checksum and sizes

clear(1) - clear terminal screen

cmp(1) - compare two files

co(1) - check out RCS revisions

col(1) - filter reverse linefeeds and backspaces

comb(1) - combine SCCS deltas

comm(1) - select or reject lines common to two sorted files

command(1) - execute a simple command

compact(1) - compact and uncompact files, and cat them

compress(1) - compress and expand data

compressdir(1) - compress and expand data — see compress(1)

convert(1) - convert an audio file

cp(1) - copy files and directory subtrees

cpio(1) - copy file archives in and out; duplicate directory trees

cpp(1) - the C language preprocessor

crontab(1) - user job file scheduler

crypt(1) - encode and decode files

csh(1) - a shell (command interpreter) with C-like syntax

cslip(1) - PPP point to point protocal daemon — see pppd(1)

csplit(1) - file context split

ct(1) - spawn getty to a remote terminal (call terminal)

ctags(1) - create a tags file

cu(1) - call another (UNIX) system; terminal emulator

cut(1) - extract (cut out) selected fields from each line of a file

D

date(1) - display or set the date and time

dc(1) - desk calculator

dd(1) - convert, reblock, translate, and copy a (tape) file

delta(1) - make a delta (change) to an SCCS file

deroff(1) - remove nroff, tbl, and neqn constructs

dhcpv6client_ui(1) - DHCPv6 client interface for requesting configuration parameters from the DHCPv6 server.

diff(1) - differential file and directory comparator

diff3(1) - 3-way differential file comparison

diffmk(1) - mark changes between two different versions of a file

dircmp(1) - directory comparison

dirname(1) - extract portions of path names — see basename(1)

disable(1) - enable/disable LP printers — see enable(1)

divpage(1) - filters invoked by lp interface scripts — see lpfilter(1)

dmpxlt(1) - dump iconv translation tables to a readable format

dnssec-keygen(1) - key generation tool for DNSSEC

dnssec-makekeyset(1) - used to produce a set of DNSSEC keys

dnssec-signkey(1) - DNSSEC keyset signing tool

dnssec-signzone(1) - DNSSEC zone signing tool

domainname(1) - set or display name of Network Information Service domain

dos2ux(1) - convert ASCII file format

doschmod(1) - change attributes of a DOS file

doscp(1) - copy to or from DOS files

dosdf(1) - report number of free disk clusters

dosll(1) - list contents of \s-1DOS\s+1 directories — see dosls(1)

dosls(1) - list contents of DOS directories

dosmkdir(1) - make a DOS directory

dosrm(1) - remove DOS files or directories

dosrmdir(1) - remove \s-1DOS\s+1 files or directories — see dosrm(1)

du(1) - summarize disk usage

dumpmsg(1) - create message catalog file for modification — see findmsg(1)

E

echo(1) - echo (print) arguments

ed(1) - line-oriented text editor

edit(1) - extended line-oriented text editor — see ex(1)

egrep(1) - search a file for a pattern — see grep(1)

elfdump(1) - dump information contained in object files.

elm(1) - process electronic mail through a screen-oriented interface

elmalias(1) - display and verify elm user and system aliases

enable(1) - enable/disable LP printers

env(1) - set environment for command execution

eucset(1) - set and get code widths for ldterm

ex(1) - extended line-oriented text editor

expand(1) - expand tabs to spaces, and vice versa

expand_alias(1) - recursively expands the sendmail aliases

expr(1) - evaluate arguments as an expression

F

factor(1) - factor a number, generate large primes

false(1) - return exit status zero or one respectively — see true(1)

fastbind(1) - Prepare an incomplete executable for faster program start-up

fastmail(1) - quick batch mail interface

fc(1) - standard and restricted POSIX.2-conformant command shells — see sh-posix(1)

fg(1) - standard and restricted POSIX.2-conformant command shells — see sh-posix(1)

fgrep(1) - search a file for a pattern — see grep(1)

file(1) - determine file type

find(1) - find files

findmsg(1) - create message catalog file for modification

findstr(1) - find strings for inclusion in message catalogs

finger(1) - user information lookup program

fmt(1) - format text

fold(1) - fold long lines for finite width output device

fontdl(1) - filters invoked by lp interface scripts — see lpfilter(1)

footprints(1) - summarize information from compiler footprint records

forder(1) - convert file data order

from(1) - who is my mail from?

fruled(1) - flash/turn off attention LEDs (cell, cabinet and I/O chassis attention LEDs)

ftio(1) - faster tape I/O

ftp(1) - file transfer program

ftpcount(1) - show current number of users for each class

ftprestart(1) - remove the shutdown message file created by ftpshut

ftpshut(1) - create shutdown message file to shut down the ftp servers at a given time

ftpwho(1) - show current process information for each ftp user.

G

gcore(1) - get core images of running processes

gencat(1) - generate a formatted message catalog file

genxlt(1) - generate iconv translation tables

get(1) - get a version of an SCCS file

getaccess(1) - list access rights to file(s)

getacl(1) - list access control lists (ACLs) for files (JFS File Systems only)

getconf(1) - get system configuration values

getopt(1) - parse command options

getopts(1) - parse utility (command) options

getprivgrp(1) - get special attributes for group

gprof(1) - display call graph profile data

grep(1) - search a file for a pattern

grget(1) - get password and group information — see pwget(1)

groups(1) - show group memberships

H

hashcheck(1) - find spelling errors — see spell(1)

hashmake(1) - find spelling errors — see spell(1)

head(1) - give first few lines

host(1) - DNS lookup utility

hostname(1) - set or display name of current host system

hp(1) - handle special functions of HP2640 and HP2621-series terminals

hp-mc680x0(1) - provide truth value about processor type — see machid(1)

hp-pa(1) - provide truth value about processor type — see machid(1)

hp9000s200(1) - provide truth value about processor type — see machid(1)

hp9000s300(1) - provide truth value about processor type — see machid(1)

hp9000s400(1) - provide truth value about processor type — see machid(1)

hp9000s500(1) - provide truth value about processor type — see machid(1)

hp9000s700(1) - provide truth value about processor type — see machid(1)

hp9000s800(1) - provide truth value about processor type — see machid(1)

hyphen(1) - find hyphenated words

I

iconv(1) - character code set conversion

id(1) - print user and group IDs and names

ident(1) - identify files in RCS

idlookup(1) - identify the user of a particular TCP connection

ied(1) - input editor and command history for interactive programs

insertmsg(1) - use findstr output to insert calls to catgets()

inv(1) - make unprintable and non-ASCII characters in a file visible or invisible — see vis(1)

iostat(1) - report I/O statistics

ipcrm(1) - remove a message queue, semaphore set, or shared memory identifier

ipcs(1) - report status of interprocess communication facilities

J

jobs(1) - standard and restricted POSIX.2-conformant command shells — see sh-posix(1)

join(1) - relational database operator

K

kdestroy(1) - destroy Kerberos tickets

kermit(1) - C-Kermit 8.0 communications software for serial and network connections: modem dialing, file transfer and management, terminal connection, character-set translation, numeric and alpha paging, and script programming.

keylogin(1) - decrypt and store secret key with keyserv

keylogout(1) - delete stored secret key with keyserv

keysh(1) - context-sensitive softkey shell

kill(1) - send a signal to a process; terminate a process

kinit(1) - obtain and cache the Kerberos ticket-granting ticket

klist(1) - list cached Kerberos tickets

kpasswd(1) - change a user's Kerberos password

ksh(1) - shell, the standard/restricted command programming language

ktutil(1) - Kerberos keytab file maintenance utility

kvno(1) - print key version numbers of Kerberos principals

L

l(1) - list contents of directories — see ls(1)

last(1) - indicate last logins of users and ttys

lastb(1) - indicate last logins of users and ttys — see last(1)

lastcomm(1) - show last commands executed in reverse order

lc(1) - list contents of directories — see ls(1)

ld(1) - link editor

ld_ia(1) - link editor for Integrity systems

ld_pa(1) - link editor for PA-RISC systems

ldapentry(1) - simple add, modify, and delete entries in an LDAP directory

ldapschema(1) - determines the status of an LDAP schema on the LDAP directory server and extends the LDAP directory server schema with new attribute types and object classes.

ldd(1) - list dynamic dependencies of executable files or shared libraries

ldd_ia(1) - list dynamic dependencies of executable files or shared libraries on Integrity systems

ldd_pa(1) - list dynamic dependencies of executable files or shared libraries on PA-RISC systems

leave(1) - remind you when you have to leave

lifcp(1) - copy to or from LIF files

lifinit(1) - write LIF volume header on file

lifls(1) - list contents of a LIF directory

lifrename(1) - rename LIF files

lifrm(1) - remove a LIF file

line(1) - read one line from user input

listusers(1) - display user login data

ll(1) - list contents of directories — see ls(1)

ln(1) - link files and directories

locale(1) - get locale-specific (NLS) information

lock(1) - reserve a terminal

logger(1) - make entries in the system log

login(1) - sign on; start terminal session

logname(1) - get login name

lorder(1) - find ordering relation for an object library

lp(1) - print/alter/cancel requests on an LP destination

lpalt(1) - print/alter/cancel requests on an LP destination — see lp(1)

lpfilter(1) - filters invoked by lp interface scripts

lprpp(1) - filters invoked by lp interface scripts — see lpfilter(1)

lpstat(1) - report status information of the LP subsystem

ls(1) - list contents of directories

lsacl(1) - list access control lists (ACLs) of files

lsf(1) - list contents of directories — see ls(1)

lsr(1) - list contents of directories — see ls(1)

lsx(1) - list contents of directories — see ls(1)

M

m4(1) - macro processor

machid(1) - provide truth value about processor type

machinfo(1) - print machine information

mail(1) - send mail to users or read mail

mailfrom(1) - summarize mail folders by subject and sender

mailq(1) - prints the mail queue

mailstats(1) - print mail traffic statistics

mailx(1) - interactive mail message processing system

make(1) - maintain, update, and regenerate groups of programs

makekey(1) - generate encryption key

man(1) - find manual information by keywords; print out a manual entry

mediainit(1) - initialize disk or partition DDS tape

merge(1) - three-way file merge

mesg(1) - permit or deny messages to terminal

mkdir(1) - make a directory

mkfifo(1) - make FIFO (named pipe) special files

mkmf(1) - make a makefile

mkmsgs(1) - create message files for use by gettxt()

mkstr(1) - extract error messages from C source into a file

mktemp(1) - make a name for a temporary file

mkuupath(1) - access and manage the pathalias database — see uupath(1)

mm(1) - print documents formatted with the mm macros

model(1) - print hardware model information

more(1) - file perusal filter for screen viewing

mpsched(1) - control the processor or locality domain on which a specific process executes

mt(1) - magnetic tape manipulating program

mv(1) - move or rename files and directories

N

named-checkconf(1) - named configuration file syntax checking tool

named-checkzone(1) - zone validity checking tool

neqn(1) - format mathematical text for nroff

netstat(1) - show network status

newalias(1) - install new elm aliases for user or system

newform(1) - change or reformat a text file

newgrp(1) - switch to a new group

newmail(1) - notify users of new mail in mailboxes

news(1) - print news items

nice(1) - run a command at nondefault priority

nis(1) - a new version of the network information name service — see nis+(1)

NIS+(1) - a new version of the network information name service — see nis+(1)

nis+(1) - a new version of the network information name service

niscat(1) - display NIS+ tables and objects

nischgrp(1) - change the group owner of an NIS+ object

nischmod(1) - change access rights on an NIS+ object

nischown(1) - change the owner of an NIS+ object

nischttl(1) - change the time to live value of an NIS+ object

nisdefaults(1) - display NIS+ default values

niserror(1) - display NIS+ error messages

nisgrep(1) - utilities for searching NIS+ tables — see nismatch(1)

nisgrpadm(1) - NIS+ group administration command

nisln(1) - symbolically link NIS+ objects

nisls(1) - list the contents of an NIS+ directory

nismatch(1) - utilities for searching NIS+ tables

nismkdir(1) - create NIS+ directories

nispasswd(1) - change NIS+ password information

nisrm(1) - remove NIS+ objects from the namespace

nisrmdir(1) - remove NIS+ directories

nistbladm(1) - NIS+ table administration command

nistest(1) - return the state of the NIS+ namespace using a conditional expression

nl(1) - line numbering filter

nljust(1) - justify lines, left or right, for printing

nm(1) - print name list of common object file

nohup(1) - run a command immune to hangups

nroff(1) - format text

nslookup(1) - query name servers interactively

nsquery(1) - query the Name Service Switch backend libraries

nsupdate(1) - Dynamic DNS update utility

O

od(1) - octal and hexadecimal dump

odump(1) - dump information contained in SOM object files

on(1) - execute command on remote host with environment similar to local

osdd(1) - print documents formatted with the mm macros — see mm(1)

P

pack(1) - compress and expand files

page(1) - file perusal filter for screen viewing — see more(1)

parstatus(1) - display information about a hardware partitionable complex

passwd(1) - change login password and associated attributes

paste(1) - merge same lines of several files or subsequent lines of one file

patch(1) - program for applying a diff file to an original

pathalias(1) - electronic address router

pathchk(1) - check path names

pax(1) - Extracts, writes, and lists archive files; copies files and directory hierarchies

pcat(1) - compress and expand files — see pack(1)

pdp11(1) - provide truth value about processor type — see machid(1)

pg(1) - file perusal filter for soft-copy terminals

pipcrm(1) - remove a POSIX message queue or a POSIX named semaphore

pipcs(1) - report status of POSIX interprocess communication facilities

pldd(1) - list the dynamic libraries linked into each process, including shared objects explicitly attached using dlopen()/shl_load()

plotdvr(1) - filters invoked by lp interface scripts — see lpfilter(1)

ppl(1) - PPP point to point protocal daemon — see pppd(1)

ppp(1) - PPP point to point protocal daemon — see pppd(1)

pppd(1) - PPP point to point protocal daemon

pppoec(1) - PPPoE (Point to Point Protocol over Ethernet) client

pr(1) - print files

praliases(1) - print system-wide sendmail aliases

prealloc(1) - preallocate disk storage

primes(1) - factor a number, generate large primes — see factor(1)

printenv(1) - print out the environment

printf(1) - format and print arguments

printstat(1) - filters invoked by lp interface scripts — see lpfilter(1)

privatepw(1) - Change WU-FTPD Group Access File Information

prmail(1) - print out mail in the incoming mailbox file

prof(1) - display profile data

prs(1) - print and summarize an SCCS file

ps(1) - report process status

pstack(1) - print a stack trace for each LWP in each process and core file

ptx(1) - permuted index

pty(1) - get the name of the terminal — see tty(1)

pwd(1) - working directory name

pwget(1) - get password and group information

Q

quota(1) - display disk usage and limits

R

ranlib(1) - regenerate archive symbol table

rcp(1) - remote file copy

rcs(1) - change RCS file attributes

rcsdiff(1) - compareRCS revisions

rcsmerge(1) - merge RCS revisions

rdist(1) - remote file distribution program

read(1) - read a line from standard input

readmail(1) - read mail from a mail folder or incoming mailbox

red(1) - line-oriented text editor — see ed(1)

remsh(1) - execute from a remote shell

reset(1) - terminal-dependent initialization — see tset(1)

rev(1) - reverse lines of a file

reverse(1) - filters invoked by lp interface scripts — see lpfilter(1)

rexec(1) - execute from a remote shell

rksh(1) - shell, the standard/restricted command programming language — see ksh(1)

rlog(1) - print log messages and other information on RCS files

rlogin(1) - remote login

rm(1) - remove files or directories

rmail(1) - send mail to users or read mail — see mail(1)

rmdel(1) - remove a delta from an SCCS file

rmdir(1) - remove directories

rmnl(1) - remove extra new-line characters from file

rndc(1) - name server control utility

rndc-confgen(1) - rndc key generation tool

rpcgen(1) - an RPC protocol compiler

rsh(1) - standard and restricted POSIX.2-conformant command shells — see sh-posix(1)

rtprio(1) - execute process with real-time priority

rtsched(1) - execute process with real-time priority

rup(1) - show host status of local machines (RPC version)

ruptime(1) - show status of local machines

rusers(1) - determine who is logged in on machines on local network

rwho(1) - show who is logged in on local machines

S

sact(1) - print current SCCS file editing activity

samlog_viewer(1) - a tool for viewing and saving the SAM logfile

sccs(1) - front-end utility program for SCCS commands

sccsdiff(1) - compare two versions of an SCCS file

sccshelp(1) - ask for help on SCCS commands

script(1) - make typescript of terminal session

sdiff(1) - side-by-side file difference program

sed(1) - stream text editor

send_sound(1) - play an audio file

serialize(1) - force target process to run serially with other processes

setacl(1) - modify access control lists (ACLs) for files (JFS File Systems only)

sffinger(1) - utility programs for TCP Wrappers — see tryfrom(1)

sh(1) - overview of various system shells

sh-posix(1) - standard and restricted POSIX.2-conformant command shells

shar(1) - make a shell archive package

shl(1) - shell layer manager

show_patches(1) - HP-UX patch display utility

size(1) - print section sizes of object files

sleep(1) - suspend execution for an interval

slip(1) - PPP point to point protocal daemon — see pppd(1)

slp(1) - set printing options for a non-serial printer

soelim(1) - eliminate .so's from nroff input

sort(1) - sort or merge files

spell(1) - find spelling errors

spellin(1) - find spelling errors — see spell(1)

split(1) - split a file into pieces

ssp(1) - remove multiple line-feeds from output

strings(1) - find the printable strings in an object or other binary file

strip(1) - strip symbol and line number information from an object file

stty(1) - set the options for a terminal port

su(1) - switch user

sum(1) - print checksum and block or byte count of file(s)

sysdiff(1) - HP-UX installed software comparator

T

tabs(1) - set tabs on a terminal

tail(1) - deliver the last part of a file

talk(1) - talk to another user

tar(1) - tape file archiver

tbl(1) - format tables for nroff

tcpdchk(1) - check tcp wrapper configuration

tcpdmatch(1) - evaluate tcp wrapper service requests

tee(1) - pipe fitting

telnet(1) - user interface to the TELNET protocol

test(1) - condition evaluation command

tftp(1) - trivial file transfer program

time(1) - time a command

timex(1) - time a command; report process data and system activity

top(1) - display and update information about the top processes on the system

touch(1) - update access, modification, and/or change times of file

tput(1) - query terminfo database

tr(1) - translate characters

true(1) - return exit status zero or one respectively

trufgrep(1) - search a file for a pattern

tryfrom(1) - utility programs for TCP Wrappers

tset(1) - terminal-dependent initialization

tsm(1) - Terminal Session Manager

tsm.command(1) - send commands to the Terminal Session Manager (TSM)

tsm.info(1) - get Terminal Session Manager state information

tsort(1) - topological sort

tty(1) - get the name of the terminal

ttytype(1) - terminal identification program

U

u370(1) - provide truth value about processor type — see machid(1)

u3b(1) - provide truth value about processor type — see machid(1)

u3b10(1) - provide truth value about processor type — see machid(1)

u3b2(1) - provide truth value about processor type — see machid(1)

u3b5(1) - provide truth value about processor type — see machid(1)

ul(1) - do underlining

umask(1) - set or display the file mode creation mask

umodem(1) - XMODEM-protocol file transfer program

unalias(1) - standard and restricted POSIX.2-conformant command shells — see sh-posix(1)

uname(1) - display information about computer system; set node name (system name)

uncompact(1) - compact and uncompact files, and cat them — see compact(1)

uncompress(1) - compress and expand data — see compress(1)

uncompressdir(1) - compress and expand data — see compress(1)

unexpand(1) - expand tabs to spaces, and vice versa — see expand(1)

unget(1) - undo a previous get of an SCCS file

unifdef(1) - remove preprocessor lines

uniq(1) - report repeated lines in a file

units(1) - conversion program

unpack(1) - compress and expand files — see pack(1)

uptime(1) - show how long system has been up, and/or who is logged in and what they are doing

users(1) - compact list of users who are on the system

uucp(1) - UNIX system to UNIX system copy

uudecode(1) - encode/decode a binary file for transmission by mailer — see uuencode(1)

uuencode(1) - encode/decode a binary file for transmission by mailer

uulog(1) - UNIX system to UNIX system copy — see uucp(1)

uuname(1) - UNIX system to UNIX system copy — see uucp(1)

uupath(1) - access and manage the pathalias database

uupick(1) - public UNIX system to UNIX system file copy — see uuto(1)

uustat(1) - uucp status inquiry and job control

uuto(1) - public UNIX system to UNIX system file copy

uutry(1) - UNIX system to UNIX system copy — see uucp(1)

uux(1) - UNIX system to UNIX system command execution

ux2dos(1) - convert \s-1ASCII\s+1 file format — see dos2ux(1)

V

vacation(1) - return ``I am not here'' indication

val(1) - validate SCCS file

vax(1) - provide truth value about processor type — see machid(1)

vc(1) - substitutes assigned values in place of identification keywords.

vedit(1) - screen-oriented (visual) text editor — see vi(1)

vi(1) - screen-oriented (visual) text editor

view(1) - screen-oriented (visual) text editor — see vi(1)

vis(1) - make unprintable and non-ASCII characters in a file visible or invisible

vmstat(1) - report virtual memory statistics

vt(1) - log into another system over lan

W

w(1) - show how long system has been up, and/or who is logged in and what they are doing — see uptime(1)

wait(1) - await process completion

wc(1) - count words, lines, and bytes or characters in a file

what(1) - get SCCS identification information

whereis(1) - locate source, binary, and/or manual for program

which(1) - locate a program file including aliases and paths

who(1) - who is on the system

whoami(1) - print effective current user id

whois(1) - Internet user name directory service

write(1) - interactively write (talk) to another user

X

xargs(1) - construct argument list(s) and execute command

xd(1) - octal and hexadecimal dump — see od(1)

xstr(1) - extract strings from C programs to implement shared strings

Y

yes(1) - be repetitively affirmative

ypcat(1) - print all values in Network Information Service map

ypmatch(1) - print values of selected keys in Network Information Service map

yppasswd(1) - change login password in Network Information System (NIS)

ypwhich(1) - list which host is Network Information System server or map master

Z

zcat(1) - compress and expand data — see compress(1)

II Section 1M: System Administration Commands

Introduction

intro(1M) - introduction to system maintenance commands and application programs

A

accept(1M) - allow/prevent LP destination queuing requests

acct(1M) - overview of accounting and miscellaneous accounting commands

acctcms(1M) - command summary from per-process accounting records

acctcom(1M) - search and print process accounting files

acctcon(1M) - connect-time accounting

acctcon1(1M) - connect-time accounting — see acctcon(1M)

acctcon2(1M) - connect-time accounting — see acctcon(1M)

acctdisk(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

acctdusg(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

acctmerg(1M) - merge or add total accounting files

accton(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

acctprc(1M) - process accounting

acctprc1(1M) - process accounting — see acctprc(1M)

acctprc2(1M) - process accounting — see acctprc(1M)

acctsh(1M) - shell procedures for accounting

acctwtmp(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

AM60Srvr(1M) - disk array server daemon

amcfg(1M) - manages LUN (logical drive) configuration on the disk array

amdload(1M) - downloads new firmware to the disk array controllers, the disk system BCC controllers, and disks

amdsp(1M) - display the status and operating configuration of the disk array

amfmt(1M) - disk format, not supported

amlog(1M) - displays host-based controller log entries for a disk array

ammgr(1M) - manages the operating characteristics of the disk array

amutil(1M) - controls various disk array management functions

arp(1M) - address resolution display and control

Asecure(1M) - control access to Audio on a workstation — see asecure(1M)

asecure(1M) - control access to Audio on a workstation

Aserver(1M) - start the audio server — see aserver(1M)

aserver(1M) - start the audio server

audevent(1M) - change or display event or system call audit status

audisp(1M) - display the audit information as requested by the parameters

audomon(1M) - audit overflow monitor daemon

audsys(1M) - start or halt the auditing system and set or display audit file information

audusr(1M) - select users to audit

authadm(1M) - non-interactive command for administrating the authorization information in the RBAC databases.

authck(1M) - check internal consistency of Authentication database

auto_parms(1M) - initial system configuration plus DHCP support command

automount(1M) - install automatic mount points

automountd(1M) - autofs mount/unmount daemon

autopush(1M) - manage system database of automatically pushed STREAMS modules

B

backup(1M) - backup or archive file system

bastille(1M) - system lockdown tool

bastille_drift(1M) - system configuration drift analyzer

bdf(1M) - report number of free disk blocks (Berkeley version)

biod(1M) - NFS daemons — see nfsd(1M)

boot(1M) - bootstrap process

bootpd(1M) - Internet Boot Protocol server

bootpquery(1M) - send BOOTREQUEST to BOOTP server

C

cachefsstat(1M) - Cache File System statistics

captoinfo(1M) - convert a termcap description into a terminfo description

catman(1M) - create the cat files for the on-line manpages

cfsadmin(1M) - administer disk space used for caching file systems with the Cache File-System (CacheFS)

ch_rc(1M) - change system configuration file

chargefee(1M) - shell procedures for accounting — see acctsh(1M)

check_patches(1M) - HP-UX 11i patch check utility

chnlspath(1M) - configure message catalog path

chroot(1M) - change root directory for a command

ckpacct(1M) - shell procedures for accounting — see acctsh(1M)

cleanup(1M) - HP-UX patch cleanup utility

clear_locks(1M) - clear locks held on behalf of an NFS client

closewtmp(1M) - overview of accounting and miscellaneous accounting commands — see acct(1M)

clri(1M) - clear inode

clri_hfs(1M) - clear inode — see clri(1M)

clrsvc(1M) - clear x25 switched virtual circuit

cmdprivadm(1M) - noninteractive editing of a command's authorization and privilege information in the

cmpt_tune(1M) - query, enable, or disable compartmentalization feature

convert_awk(1M) - converts old sendmail.cf files to new format

convertfs(1M) - convert an HFS file system to allow long file names

convertfs_hfs(1M) - convert an HFS file system to allow long file names — see convertfs(1M)

cplxmodify(1M) - modify an attribute of a system complex

cpset(1M) - install object files in binary directories

crashconf(1M) - configure system crash dumps

crashutil(1M) - manipulate crash dump data

create_sysfile(1M) - create a kernel system file

cron(1M) - timed-job execution daemon

D

dcopy(1M) - copy HFS file system with compaction.

dcopy_hfs(1M) - copy HFS file system with compaction. — see dcopy(1M)

devnm(1M) - device name

df(1M) - report number of free file system disk blocks

df_cdfs(1M) - report number of free CDFS, HFS, or NFS file system disk blocks — see df_hfs(1M)

df_hfs(1M) - report number of free CDFS, HFS, or NFS file system disk blocks

df_nfs(1M) - report number of free CDFS, HFS, or NFS file system disk blocks — see df_hfs(1M)

df_vxfs(1M) - report number of free disk blocks on a VxFS file system

dhcpclient(1M) - Client for Dynamic Host Configuration Protocol Server

dhcpdb2conf(1M) - convert DHCP client database to config file parameters

dhcptools(1M) - command line tool for DHCP elements of bootpd

dhcpv6clientd(1M) - DHCPv6 client daemon

dhcpv6d(1M) - Dynamic Host Configuration Protocol Server daemon for IPv6

dhcpv6db2conf(1M) - DHCPv6 client database converter

dig(1M) - domain information groper

diskinfo(1M) - describe characteristics of a disk device

disksecn(1M) - calculate default disk section sizes

diskusg(1M) - generate disk accounting data by user ID

dmesg(1M) - collect system diagnostic messages to form error log

dodisk(1M) - shell procedures for accounting — see acctsh(1M)

dpp(1M) - dedicated ports parser used by DDFA software

drd(1M) - manage an inactive system image

drd-activate(1M) - activate mode sets the inactive system image to be the primary boot disk the next time the system is booted

drd-clone(1M) - clone mode clones the root volume group

drd-deactivate(1M) - deactivate mode sets the active system image to be the primary boot disk the next time the system is booted

drd-mount(1M) - mount mode mounts the inactive system image

drd-runcmd(1M) - runcmd mode runs a command on the inactive system image that will not make any changes to the booted system, the kernel, or the process space

drd-umount(1M) - umount mode unmounts the inactive system image

drd_register_mirror(1M) - notify DRD that a system image has been manually mirrored using LVM or VxVM commands

drd_unregister_mirror(1M) - notify DRD that an LVM or VxVM mirror of a system image is about to be manually removed

dump(1M) - incremental file system dump, local or across network

dumpfs(1M) - dump file system information

dumpfs_hfs(1M) - dump file system information — see dumpfs(1M)

E

edquota(1M) - edit user disk quotas

efi_cp(1M) - copy to or from EFI file

efi_fsinit(1M) - write an EFI file system header on a device file

efi_ls(1M) - list EFI file information or contents of an EFI directory

efi_mkdir(1M) - make an EFI directory

efi_rm(1M) - remove an EFI file

efi_rmdir(1M) - remove an EFI directory

envd(1M) - system physical environment daemon

exportfs(1M) - export and unexport directories to NFS clients

extendfs(1M) - extend a file system size (generic)

extendfs_hfs(1M) - extend HFS file system size

extendfs_vxfs(1M) - extend VxFS file system size

F

fbackup(1M) - selectively back up files

fcmsutil(1M) - Fibre Channel Mass Storage Utility Command for Fibre Channel Host Bus Adapters

fdetach(1M) - detach a STREAMS-based file descriptor from a filename

ff(1M) - list file names and statistics for a file system

ff_hfs(1M) - list file names and statistics for HFS file system

ff_vxfs(1M) - fast find: list file names and statistics for a VxFS file system

fingerd(1M) - remote user information server

fixman(1M) - fix manpages for faster viewing with man command

format(1M) - format an HP SCSI disk array LUN

frecover(1M) - selectively recover files

frupower(1M) - turn on/off or display current status of power for cells and I/O chassis

fsadm(1M) - a file system administration command

fsadm_hfs(1M) - HFS file system administration command

fsadm_vxfs(1M) - resize or reorganize a VxFS file system

fscat(1M) - cat a VxFS file system — see fscat_vxfs(1M)

fscat_vxfs(1M) - cat a VxFS file system

fsck(1M) - file system consistency check and interactive repair

fsck_cachefs(1M) - check integrity of data cached with CacheFS

fsck_hfs(1M) - HFS file system consistency check and interactive repair

fsck_vxfs(1M) - check and repair a VxFS file system

fsclean(1M) - determine the shutdown status of HFS file systems

fsclean_hfs(1M) - determine the shutdown status of HFS file systems — see fsclean(1M)

fsdb(1M) - file system debugger (generic)

fsdb_hfs(1M) - HFS file system debugger

fsdb_vxfs(1M) - VxFS file system debugger

fsirand(1M) - install random inode generation numbers

fstyp(1M) - determine file system type

ftpd(1M) - DARPA Internet File Transfer Protocol server

fuser(1M) - list processes using a file or file structure

fwtmp(1M) - manipulate connect accounting records

G

gated(1M) - gateway routing daemon

gdc(1M) - operational user interface for gated

geocustoms(1M) - configure system language on multi-language systems

getext(1M) - get VxFS extent attributes

getfilexsec(1M) - display security attributes of binary executables

getmemwindow(1M) - extracts window ids of user processes from /etc/services.window

getprocxsec(1M) - display security attributes of a process

getprpw(1M) - display protected password database

getrules(1M) - display compartment rules

getty(1M) - set terminal type, modes, speed, and line discipline

getx25(1M) - get x25 line

groupadd(1M) - add a new group to the system

groupdel(1M) - delete a group from the system

groupmod(1M) - modify a group on the system

grpck(1M) - password/group file checkers — see pwck(1M)

H

hosts_to_name(1M) - translate host table to name server file format — see hosts_to_named(1M)

hosts_to_named(1M) - translate host table to name server file format

hotplugd(1M) - PCI I/O hotplug (attention button) events daemon

hpux(1M) - HP-UX bootstrap

hpux.efi(1M) - HP-UX bootstrap for Itanium-based systems

I

identd(1M) - TCP/IP IDENT protocol server

idisk(1M) - create partitions for Itanium(R)-based system's disks

ifconfig(1M) - configure network interface parameters

inetd(1M) - Internet services daemon

inetsvcs_sec(1M) - enable/disable secure internet services

infocmp(1M) - compare or print out terminfo descriptions

init(1M) - process control initialization

insf(1M) - install special (device) files

install(1M) - install commands

intctl(1M) - manage the interrupt configuration of the system

intrbald(1M) - daemon for balancing interrupts

ioinit(1M) - test and maintain consistency between the kernel I/O data structures and /etc/ioconfig

ioscan(1M) - scan I/O system

isl(1M) - initial system loader

itemap(1M) - load an ITE (Internal Terminal Emulator) keyboard mapping.

K

kclog(1M) - manage kernel configuration log file

kcmodule(1M) - manage kernel modules and subsystems

kconfig(1M) - manage kernel configurations

kcpath(1M) - print kernel configuration pathnames

kctune(1M) - manage kernel tunable parameters

keyenvoy(1M) - talk to keyserver

keyserv(1M) - server for storing private encryption keys

killall(1M) - kill all active processes

killsm(1M) - kill the sendmail daemon

kl(1M) - control kernel logging

kmpath(1M) - retrieve kernel name and associated kernel configuration information

kmtune(1M) - query, set, or reset system parameters

krs_flush(1M) - flush kernel registry services data to disk

krsd(1M) - kernel registry services daemon

L

labelit(1M) - copy a file system with label checking — see volcopy(1M)

labelit_hfs(1M) - copy an HFS file system with label checking — see volcopy_hfs(1M)

labelit_vxfs(1M) - copy a VxFS file system with label checking — see volcopy_vxfs(1M)

lanadmin(1M) - local area network administration program

landiag(1M) - local area network administration program — see lanadmin(1M)

lanscan(1M) - display LAN device configuration and status

lastlogin(1M) - shell procedures for accounting — see acctsh(1M)

ldapcfinfo(1M) - programmatically provides LDAP-UX information to non-interactive applications

ldapclientd(1M) - LDAP client daemon process

ldapugadd(1M) - add new accounts or groups to an LDAP directory server

ldapugdel(1M) - remove existing accounts or groups from an LDAP directory server

ldapuglist(1M) - display and enumerate POSIX-like account and group entries in an LDAP directory server

ldapugmod(1M) - modify existing POSIX accounts or groups in an LDAP directory server

libcadmin(1M) - libc administration command

link(1M) - execute link() and unlink() system calls without error checking

linkloop(1M) - verify LAN connectivity with link-level loopback

localedef(1M) - generate a locale environment

lockd(1M) - network lock daemon

logins(1M) - display system and user login data

lpadmin(1M) - configure the LP spooling system

lpana(1M) - display LP spooler performance analysis information

lpfence(1M) - start the LP request scheduler, stop the LP request scheduler, move requests between LP destinations, and define the minimum priority for printing — see lpsched(1M)

lpmove(1M) - start the LP request scheduler, stop the LP request scheduler, move requests between LP destinations, and define the minimum priority for printing — see lpsched(1M)

lpsched(1M) - start the LP request scheduler, stop the LP request scheduler, move requests between LP destinations, and define the minimum priority for printing

lpshut(1M) - start the LP request scheduler, stop the LP request scheduler, move requests between LP destinations, and define the minimum priority for printing — see lpsched(1M)

lsdev(1M) - list device drivers in the system

lssf(1M) - list a special file

lugadmin(1M) - long user and group name enablement and display

lvchange(1M) - change LVM logical volume characteristics

lvcreate(1M) - create logical volume in LVM volume group

lvdisplay(1M) - display information about LVM logical volumes

lvextend(1M) - increase space, increase mirrors for LVM logical volume

lvlnboot(1M) - prepare LVM logical volume to be root, boot, primary swap, or dump volume

lvmchk(1M) - check if disk volume is under HP Logical Volume Manager (LVM) control

lvmerge(1M) - merge two LVM logical volumes into one logical volume

lvmmigrate(1M) - prepare root file system for migration from partitions to LVM logical volumes

lvreduce(1M) - decrease space allocation or the number of mirror copies of logical volumes

lvremove(1M) - remove one or more logical volumes from LVM volume group

lvrmboot(1M) - remove LVM logical volume link to root, primary swap, or dump volume

lvsplit(1M) - split mirrored LVM logical volume into two logical volumes

lvsync(1M) - synchronize stale mirrors in LVM logical volumes

lwresd(1M) - lightweight resolver daemon

M

makedbm(1M) - make a Network Information System database

makemap(1M) - creates database maps for sendmail

map-mbone(1M) - Multicast Router Connection Mapper

mc(1M) - media changer manipulation utility

mk_kernel(1M) - load a kernel configuration from a system file

mkboot(1M) - install, update or remove boot programs from disk

mkfs(1M) - construct a file system (generic)

mkfs_hfs(1M) - construct an HFS file system

mkfs_vxfs(1M) - construct a VxFS file system

mklost+found(1M) - make a lost+found directory for fsck(1M)

mknod(1M) - create special files

mksf(1M) - make a special (device) file

modprpw(1M) - modify protected password database

monacct(1M) - shell procedures for accounting — see acctsh(1M)

mount(1M) - mount and unmount file systems

mount_cachefs(1M) - mount CacheFS file systems

mount_cdfs(1M) - mount and unmount CDFS file systems

mount_hfs(1M) - mount and unmount HFS file systems

mount_lofs(1M) - mount and unmount LOFS file systems

mount_memfs(1M) - mount and unmount MemFS file systems

mount_nfs(1M) - mount and unmount NFS file systems

mount_vxfs(1M) - mount and unmount VxFS file systems

mountall(1M) - mount and unmount multiple file systems

mountd(1M) - NFS mount request server

mrinfo(1M) - Multicast Routing Configuration Information Tool

mrouted(1M) - IP multicast routing daemon

mtail(1M) - tails the mail log file

mvdir(1M) - move a directory

N

naaagt(1M) - Native Agent Adapter (NAA)

named(1M) - Internet domain name server

ncheck(1M) - generate a list of path names from inode numbers

ncheck_hfs(1M) - generate a list of path names from inode numbers for a HFS file system

ncheck_vxfs(1M) - generate pathnames from inode numbers for a VxFS file system

ndd(1M) - network tuning

ndp(1M) - IPv6 Neighbor Discovery cache display and control

netfmt(1M) - format tracing and logging binary files

nettl(1M) - control network tracing and logging

nettladm(1M) - network tracing and logging administration manager

nettlconf(1M) - configure network tracing and logging command subsystem database

newaliases(1M) - rebuilds the database for the mail aliases file

newfs(1M) - construct a new file system

newfs_hfs(1M) - construct a new HFS file system

newfs_vxfs(1M) - create a new VxFS file system

newkey(1M) - create a new Diffie-Hellman key pair in the publickey database

nfsd(1M) - NFS daemons

nfsstat(1M) - Network File System statistics

nis_cachemgr(1M) - maintains a cache containing location information about NIS+ servers

nisaddcred(1M) - create NIS+ credentials

nisaddent(1M) - create NIS+ tables from corresponding /etc files or NIS maps

nisclient(1M) - initialize NIS+ credentials for NIS+ principals

nisd(1M) - NIS+ service daemon — see rpc.nisd(1M)

nisd_resolv(1M) - NIS+ service daemon — see rpc.nisd(1M)

nisinit(1M) - NIS+ client and server initialization utility

nislog(1M) - display the contents of the NIS+ transaction log

nispasswdd(1M) - NIS+ password update daemon — see rpc.nispasswdd(1M)

nisping(1M) - send ping to NIS+ servers

nispopulate(1M) - populate the NIS+ tables in a NIS+ domain.

nisserver(1M) - set up NIS+ servers.

nissetup(1M) - initialize a NIS+ domain

nisshowcache(1M) - NIS+ utility to print out the contents of the shared cache file

nisstat(1M) - report NIS+ server statistics

nisupdkeys(1M) - update the public keys in a NIS+ directory object

ntpdate(1M) - set the date and time via NTP

ntpq(1M) - standard Network Time Protocol query program

nulladm(1M) - shell procedures for accounting — see acctsh(1M)

O

ocd(1M) - outbound connection daemon used by DDFA software

ocdebug(1M) - outbound connection daemon debug utility used by DDFA software

olrad(1M) - command for online addition/replacement of PCI IO cards

opx25(1M) - execute HALGOL programs

ospf_monitor(1M) - monitor OSPF (Open Shortest Path First protocol) gateways

owners(1M) - list owners of outgoing network connections

P

parcreate(1M) - create a new partition

parmodify(1M) - modify an existing partition

parremove(1M) - remove an existing partition

parunlock(1M) - unlock the Stable Complex Configuration Data, Partition Configuration Data, Dynamic Complex Configuration Data, Cell Data or cancel pending changes to the Stable Complex Configuration Data

pcnfsd(1M) - PC-NFS authentication and print request server

pcserver(1M) - Basic Serial and HP AdvanceLink server

pdc(1M) - processor-dependent code (firmware)

pfs_exportfs(1M) - export and unexport directories to PFS clients

pfs_mount(1M) - mount and unmount CD-ROM file systems

pfs_mountd(1M) - PFS mount request server

pfs_mountd.rpc(1M) - PFS mount request server — see pfs_mountd(1M)

pfs_umount(1M) - mount and unmount CD-ROM file systems — see pfs_mount(1M)

pfsd(1M) - PFS daemon

pfsd.rpc(1M) - PFS daemon — see pfsd(1M)

ping(1M) - send ICMP Echo Request packets to network host

portmap(1M) - universal addresses to RPC program number mapper — see rpcbind(1M)

power_onoff(1M) - timed, automatic system power on, and power off

pppoerd(1M) - PPPoE (Point to Point Protocol over Ethernet) relay

pppoesd(1M) - PPPoE (Point-to-Point Protocol over Ethernet) server daemon

prctmp(1M) - shell procedures for accounting — see acctsh(1M)

prdaily(1M) - shell procedures for accounting — see acctsh(1M)

privedit(1M) - let authorized users edit files that are under access control

privrun(1M) - invoke another application with privileges after performing appropriate authorization checks and optionally reauthenticating the user

prtacct(1M) - shell procedures for accounting — see acctsh(1M)

psrset(1M) - create and manage processor sets

pvchange(1M) - change characteristics and access path of a physical volume in an LVM volume group

pvck(1M) - check or repair a physical volume in LVM volume group

pvcreate(1M) - create physical volume for use in LVM volume group

pvdisplay(1M) - display information about physical volumes in LVM volume group(s).

pvmove(1M) - move allocated physical extents from one LVM physical volume to other physical volumes

pvremove(1M) - remove LVM data structure from a physical volume

pwck(1M) - password/group file checkers

pwconv(1M) - install, update or check the /etc/shadow file

pwgr_stat(1M) - Password and Group Hashing and Caching Statistics.

pwgrd(1M) - Password and Group Hashing and Caching daemon.

pwunconv(1M) - convert passwords from shadow to nonshadow

Q

quot(1M) - summarize file system ownership

quot_hfs(1M) - summarize ownership on an HFS file system

quot_vxfs(1M) - summarize ownership on a VxFS file system

quotacheck(1M) - file system quota consistency checker

quotacheck_hfs(1M) - quota consistency checker for HFS file systems

quotacheck_vxfs(1M) - VxFS file system quota consistency checker

quotaoff(1M) - turn HFS file system quotas on and off — see quotaon(1M)

quotaon(1M) - turn HFS file system quotas on and off

R

rad(1M) - rad features have been moved to olrad

ramutil(1M) - utility to create or destroy RAM disk volumes

rarpc(1M) - Reverse Address Resolution Protocol client

rarpd(1M) - Reverse Address Resolution Protocol daemon

rbacdbchk(1M) - verifies the syntax of the Role-Based Access Control (RBAC) database files

rc(1M) - general purpose sequencer invoked upon entering new run level

rcancel(1M) - remove requests from a remote printer spooling queue

rdpd(1M) - router discovery protocol daemon (OBSOLETE)

rdump(1M) - incremental file system dump, local or across network — see dump(1M)

reboot(1M) - reboot the system

reject(1M) - allow/prevent LP destination queuing requests — see accept(1M)

remshd(1M) - remote shell server

renice(1M) - alter priority of running processes

repquota(1M) - summarize file system quotas

restore(1M) - restore file system incrementally, local or across network

rexd(1M) - RPC-based remote execution server

rexecd(1M) - remote execution server

ripquery(1M) - query RIP gateways

rlogind(1M) - remote login server

rlp(1M) - send LP print request to a remote system

rlpdaemon(1M) - daemon for queuing, displaying, removing and altering remote spool requests and writing remote messages

rlpstat(1M) - print status of LP spooler requests on a remote system

rmboot(1M) - install, update or remove boot programs from disk — see mkboot(1M)

rmsf(1M) - remove a special (device) file

rmt(1M) - remote magnetic-tape protocol module

roleadm(1M) - non-interactive editing of role-related information in RBAC databases

route(1M) - manually manipulate the routing tables

rpc.lockd(1M) - network lock daemon — see lockd(1M)

rpc.mountd(1M) - NFS mount request server — see mountd(1M)

rpc.nisd(1M) - NIS+ service daemon

rpc.nisd_resolv(1M) - NIS+ service daemon — see rpc.nisd(1M)

rpc.nispasswdd(1M) - NIS+ password update daemon

rpc.pcnfsd(1M) - PC-NFS authentication and print request server — see pcnfsd(1M)

rpc.statd(1M) - network status monitor — see statd(1M)

rpc.ypupdated(1M) - server for changing NIS information — see ypupdated(1M)

rpcbind(1M) - universal addresses to RPC program number mapper

rpcinfo(1M) - report RPC information

rquotad(1M) - remote quota server

rrestore(1M) - restore file system incrementally, local or across network — see restore(1M)

rstatd(1M) - kernel statistics server

rtradvd(1M) - Router Advertisement daemon for IPv6

runacct(1M) - run daily accounting

rusersd(1M) - network username server

rvxdump(1M) - incremental VxFS file system dump, local or across network — see vxdump(1M)

rvxrestore(1M) - restore file system incrementally, local or across network — see vxrestore(1M)

rwall(1M) - write to all users over a network

rwalld(1M) - network rwall server

rwhod(1M) - system status server

S

sa1(1M) - system activity report package

sa2(1M) - system activity report package — see sa1(1M)

sadc(1M) - system activity report package — see sa1(1M)

sam(1M) - system administration manager

sar(1M) - system activity reporter

sasmgr(1M) - utility to manage HP-UX Serial Attached SCSI (SAS) Mass Storage I/O cards / HBAs

savecrash(1M) - save a crash dump of the operating system

scsictl(1M) - control a SCSI device

sd(1M) - display and monitor job information, create and remove jobs; invoke graphical user interface to display and monitor job information and create and remove jobs, respectively — see swjob(1M)

security_patch_check(1M) - check compliance with HP-UX security bulletins

sendmail(1M) - send mail over the Internet

service.switch(1M) - indicate lookup sources and fallback mechanism

set_parms(1M) - set system initial identity parameters: host name, date, time, root password, networking

setboot(1M) - display and modify boot variables in stable storage

setext(1M) - set VxFS extent attributes

setfilexsec(1M) - set binary executable file security attributes

setmemwindow(1M) - changes the window id of a running program or starts a program in a particular memory window

setmnt(1M) - establish the file-system mount table, /etc/mnttab

setoncenv(1M) - NFS environment configuration command

setprivgrp(1M) - set special privileges for groups

setrules(1M) - set compartment rules

setuname(1M) - change machine information

showmount(1M) - show all remote mounts

shutacct(1M) - shell procedures for accounting — see acctsh(1M)

shutdown(1M) - terminate all processing

sig_named(1M) - send signals to the domain name server

slpd(1M) - Service Location Protocol Daemon

slpdc(1M) - send signals to the SLP daemon or starts slpd

smrsh(1M) - restricted shell for sendmail

snmpd(1M) - Simple Network Management Protocol (SNMP) Process

snmpdm(1M) - Simple Network Management Protocol (SNMP) Process — see snmpd(1M)

softpower(1M) - determine if softpower hardware is installed on the system

spray(1M) - spray packets

sprayd(1M) - spray server

st(1M) - shared tape administration

startup(1M) - shell procedures for accounting — see acctsh(1M)

statd(1M) - network status monitor

strace(1M) - write STREAMS event trace messages to standard output

strchg(1M) - change or query stream configuration

strclean(1M) - remove outdated STREAMS error log files

strconf(1M) - change or query stream configuration — see strchg(1M)

strerr(1M) - receive error messages from the STREAMS log driver

strvf(1M) - STREAMS verification tool

swa(1M) - HP-UX Software Assistant

swa-clean(1M) - remove files created by SWA

swa-get(1M) - download software from HP to resolve issues and make a depot

swa-report(1M) - report software and security issues, and resolutions.

swa-step(1M) - advanced control of Software Assistant execution steps

swacl(1M) - view or modify the Access Control Lists (ACLs) which protect software products

swagent(1M) - daemon that invokes swagent; serve local or remote SD software management tasks — see swagentd(1M)

swagentd(1M) - daemon that invokes swagent; serve local or remote SD software management tasks

swapinfo(1M) - system paging space information

swapon(1M) - enable device or file system for paging

swask(1M) - ask for user response

swconfig(1M) - configure, unconfigure, or reconfigure installed software

swcopy(1M) - install and configure software products; software products for subsequent installation or distribution; respectively — see swinstall(1M)

swinstall(1M) - install and configure software products; software products for subsequent installation or distribution; respectively

swjob(1M) - display and monitor job information, create and remove jobs; invoke graphical user interface to display and monitor job information and create and remove jobs, respectively

swlist(1M) - display information about software products

swmodify(1M) - modify software products in a target root or depot

swpackage(1M) - package software products into a target depot or tape

swreg(1M) - register or unregister depots and roots

swremove(1M) - unconfigure and remove software products

swverify(1M) - verify software products

sync(1M) - synchronize file systems

syncer(1M) - periodically sync for file system integrity

sysdef(1M) - display system definition

syslogd(1M) - log system messages

T

talkd(1M) - remote user communication server

tcpd(1M) - access control facility for internet services

telnetd(1M) - TELNET protocol server

tftpd(1M) - trivial file transfer protocol server

tic(1M) - terminfo compiler

tsm.lpadmin(1M) - add or remove a printer for use with tsm

ttsyncd(1M) - daemon to maintain the nis+ password table in sync with the nis+ trusted table