vxmirror(1M)

NAME

vxmirror — mirror volumes on a disk or control default mirroring

SYNOPSIS

/etc/vx/bin/vxmirror [-g diskgroup ] [-d yes|no ] [-t tasktag ] medianame [new_medianame...]

/etc/vx/bin/vxmirror [-g diskgroup ] [-d yes|no ] [-t tasktag ] -a [new_medianame...]

/etc/vx/bin/vxmirror [-g diskgroup ] [-d yes|no]

/etc/vx/bin/vxmirror [-g diskgroup] -D

DESCRIPTION

The vxmirror command provides a mechanism to mirror the contents of a specified disk, to mirror all currently un-mirrored volumes in the specified disk group, or to change or display the current defaults for mirroring. All volumes that have only a single plex (mirror copy), are mirrored by adding an additional plex.

Volumes containing subdisks that reside on more than one disk are not mirrored by vxmirror.

vxmirror is generally called from the vxdiskadm menus. It is not an interactive command, and after it is called, continues until completion of the operation or until a failure is detected.

Note: Generating mirror copies of volumes can take a considerable time to complete.

In the first listed form of this command, the disk media name is supplied on the command line to vxmirror. That name is assumed to be the only disk from which volumes are mirrored. In the case of mirroring volumes from a specified disk, only simple single-subdisk volumes are mirrored.

In the first and second listed forms of the command, new_medianame... identifies a new disk media name (or set of names). The mirroring operation uses these names as targets on which to allocate the mirrors. An error results if the same disk is specified for both the source and target disk and if no other viable targets are supplied.

OPTIONS

-a: Mirrors all existing volumes for the specified disk group.
-d yes | no: Changes the default for subsequent volume creation, depending on the option argument. If yes, then all subsequent volumes created automatically become mirrored volumes. If no, then mirroring is turned off for future volumes created.
-D: Displays current default status for mirroring.
-g diskgroup: Limits operation of the command to the given disk group, as specified by disk group ID or disk group name. The medianame operands are evaluated relative to the given disk group. If no disk group is supplied, then rootdg is assumed.
-t tasktag: Specifies using a tasktag as the tag for any tasks created to perform the mirror operations.

EXAMPLES

The following command mirrors the disk disk01 to any available space on any available disk. Subsequent calls to vxassist mirror created volumes by default.

/etc/vx/bin/vxmirror -d yes disk01 

This command displays the current status of default mirroring. It outputs the string yes if mirroring is currently enabled, or no if mirroring is not enabled.

/etc/vx/bin/vxmirror -D 

This command mirrors any volumes on disk02 to disk03.

/etc/vx/bin/vxmirror disk02 disk03 

FILES

/etc/default/vxassist: The defaults file for vxassist parameters.

vxmirror(1M)

Technical documentation

» Table of Contents

» Index