United States-English

Configuring OPS Clusters with MC/LockManager: > Chapter 4 Planning and Documenting and OPS Cluster

Planning for OPS 8.1.5 64 bit and OPS 8.1.6

»

Technical documentation


	Complete book in PDF


»	Feedback

» Table of Contents

» Index

When using (Oracle Parallel Server) OPS 8.1.5 64 bit or OPS 8.1.6, set DLM_ENABLED to NO and GMS_ENABLED to NO, then set parameters as defined below.

OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Parameters

Appropriate values must be identified in SAM or in the ASCII cluster configuration file for the following GMS parameters:

DLM Enabled: When using OPS 8.1.5 64 bit or OPS 8.1.6, set this value to NO. In the ASCII cluster configuration file, this parameter is known as DLM_ENABLED.
GMS Enabled: When using OPS 8.1.5 64 bit or OPS 8.1.6 set this value to NO. In the ASCII cluster configuration file, this parameter is known as GMS_ENABLED.

OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Configuration Worksheet

Fill out the OPS 8.1.5 64 bit and OPS 8.1.6 cluster configuration worksheet in cooperation with your HP-UX system administrator and Oracle database administrator. Figure 4-8 “OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Configuration Worksheet” is a sample worksheet filled out. Refer to the appendix, "Appendix E “Blank Planning Worksheets ”" for samples of blank worksheets. Make as many copies as you need. Fill out the worksheet and keep it for future reference.

Figure 4-8 OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Configuration Worksheet

        	DLM Enabled:  ____NO_________________________
 
        	GMS Enabled:  ____NO_________________________
 
        	GMS Connect Timeout: __30 sec________________
 
        	GMS Location: ______________________________

Printable version


Privacy statement	Using this site means you accept its terms	Feedback to webmaster

© 1999 Hewlett-Packard Development Company, L.P.