 |
» |
|
|
|
A- activation
of volume groups
- in shared mode, Activating a Volume Group in Shared Mode (HP-UX Commands Only)
- additional
package resource
- parameter in package configuration, Package Configuration File Parameters
- additional
package resources
- monitoring, Using the Event Monitoring Service
- addressing, SCSI, Setting SCSI Addresses for the Largest Expected Cluster Size
- administration
- cluster
and package states, Reviewing Cluster and Package States
- halting
a package, Halting a Package
- moving
a package, Moving a Package
- of
packages and services, Managing Packages and Services
- reconfiguring
a package, Reconfiguring the Package
- responding
to cluster events, Responding to Cluster Events Affecting Packages
- reviewing
configuration files, Reviewing Configuration Files
- starting
a package, Starting a Package
- troubleshooting, Troubleshooting Approaches
- allocating
- shared
memory, Setting HP-UX Shared Memory Allocation
- APA
- auto
port aggregation, Automatic Port Aggregation
- applications
- writing
HA services for networks, Define Application Startup and Shutdown
- arp
- diagnostic
command;diagnostic command
- arp, Reviewing the LAN Configuration
- ARP
messages
- after switching, ARP Messages after Switching
- array
- replacing
a faulty mechanism, Replacing a Faulty Array Mechanism
- ASCII
cluster configuration file template, Using MC/LockManager Commands to Configure the Cluster
- ASCII
package configuration file template, Package Configuration Template File
- ASCII
templates
- DLM configuration file, Using HP-UX Commands to Configure the Distributed Lock Manager (OPS 7.3.x)
- auto
activation
- volume groups, Preventing Automatic Activation of Volume Groups
- auto
port aggregation
- define, Automatic Port Aggregation
- AUTO_START_TIMEOUT
- parameter
in the cluster configuration file, Cluster Manager Parameters
- AUTO_START_TIMEOUT
(autostart delay)
- in sample configuration file, Cluster Configuration Template File
- parameter in cluster manager
configuration, Cluster Manager Parameters
- automatic
switching
- parameter in package configuration, Package Configuration File Parameters
- autostart
delay
- parameter in the cluster configuration
file, Cluster Manager Parameters
- autostart
for clusters
- setting up, Setting up Autostart Features
B- binary
configuration file
- distributing, Distributing the Binary Configuration File
- distributing using HP-UX
commands, Distributing the Configuration File with HP-UX Commands
- distributing with SAM, Distributing the Configuration File with SAM
- binding
- in
network applications, Bind to a Fixed Port, Bind to Relocatable IP Addresses
- bridged
net
- defined, Redundant Network Components
- for redundancy in network interfaces, Redundant Network Components
- building
a cluster
- ASCII cluster configuration file template, Using MC/LockManager Commands to Configure the Cluster
- cluster configuration steps, Configuring the Cluster
- identifying cluster lock volume group, Identifying the Cluster Lock Volume Group and Disk
- identifying cluster-aware volume groups, Identifying Volume Groups for Packages
- verifying the cluster configuration, Verifying the Cluster Configuration
- building
an OPS cluster with HP-UX commands
- displaying
the logical volume infrastructure, Displaying the Logical Volume Infrastructure
- logical volume
infrastructure, Creating the Logical Volume Infrastructure for OPS
- building
logical volumes
- for OPS, Creating Logical Volumes for OPS
- bus
type
- hardware planning, Disk I/O Information
C- checkpoints, Use Checkpoints
- client traffic
- hardware
planning, LAN Information
- cluster
- configuring
with commands, Using MC/LockManager Commands to Configure the Cluster
- configuring
with SAM, Using SAM to Configure the Cluster
- redundancy
of components, Redundancy of Cluster Components
- starting
in SAM, Using SAM to Start the Cluster
- starting
with HP-UX Commands, Using HP-UX Commands to Start the Cluster
- status
options, Cluster Status
- stopping
in SAM, Using SAM to Stop the Cluster
- stopping
with HP-UX Commands, Using HP-UX Commands to Stop the Cluster
- testing
halt, Testing Cluster Halt and Reconfiguration
- testing
reconfiguration, Testing Cluster Halt and Reconfiguration
- understanding
components, Redundancy of Cluster Components
- cluster
administration
- solving problems, Solving Package Problems
- cluster
configuration
- creating with SAM or Commands, Configuring the Cluster
- file on all nodes, Configuration of the Cluster
- identifying cluster lock volume
group, Identifying the Cluster Lock Volume Group and Disk
- identifying cluster-aware volume
groups, Identifying Volume Groups for Packages
- making permanent modifications, Changing the Permanent Cluster Configuration
- modifying, Changing the Permanent Cluster Configuration
- planning, Cluster Configuration Planning
- planning worksheet, Cluster Configuration Worksheet
- verifying, Verifying Cluster and Package Configuration
- verifying the cluster configuration, Verifying the Cluster Configuration
- cluster configuration
file, Heartbeat Messages, Cluster Configuration Template File
- Autostart Delay parameter
(AUTO_START_TIMEOUT), Cluster Manager Parameters
- cluster
coordinator
- explained, How the Cluster Manager Works
- cluster
interface parameters
- for DLM configuration, DLM Configuration Files (OPS 7.3.x)
- cluster lock
- 4
or more nodes, Use of the Cluster Lock, No Cluster Lock
- and cluster re-formation time, Cluster Lock and Re-formation Time, Heartbeat Subnet and Re-formation Time
- and
power supplies, Redundant Power Supplies
- backup up lock data;backing up cluster
lock information, Backing Up Cluster Lock Information
- choosing the lock volume group, Choosing the Cluster Lock Volume Group
- dual locks, Dual Cluster Lock
- identifying in configuration file, Identifying the Cluster Lock Volume Group and Disk
- no
locks, No Cluster Lock
- single lock, Single Cluster Lock
- storing configuration data, Storing Volume Group and Cluster Lock Configuration Data
- two nodes, Use of the Cluster Lock
- use in re-forming a cluster, Use of the Cluster Lock
- cluster manager
- automatic restart of cluster, Automatic Cluster Restart
- blank planning worksheet, Cluster Configuration Worksheet
- cluster name parameter, Cluster Manager Parameters
- cluster node parameter, Cluster Manager Parameters
- cluster volume group parameter, Cluster Manager Parameters
- DLM connect timeout parameter, Cluster Interface Specific DLM Parameters
- DLM Enabled parameter, Cluster Interface Specific DLM Parameters
- DLM enabled parameter, Cluster Interface Specific DLM Parameters
- DLM halt timeout parameter, Cluster Interface Specific DLM Parameters
- DLM ping timeout parameter, Cluster Interface Specific DLM Parameters
- DLM reconfiguration timeout parameter, Cluster Interface Specific DLM Parameters
- dynamic re-formation, Dynamic Cluster Re-formation
- GMS Enabled parameter, Cluster Interface Specific DLM Parameters
- heartbeat interval parameter, Cluster Manager Parameters
- heartbeat subnet parameter, Cluster Manager Parameters
- initial configuration of the cluster, Configuration of the Cluster
- main
functions, How the Cluster Manager Works
- maximum configured packages parameter, Cluster Manager Parameters
- monitored non-heartbeat subnet, Cluster Manager Parameters
- network polling interval parameter, Cluster Manager Parameters
- node timeout parameter, Cluster Manager Parameters
- physical lock volume parameter, Cluster Manager Parameters
- planning the configuration, Cluster Manager Parameters
- re-formation, Dynamic Cluster Re-formation
- serial device file parameter, Cluster Manager Parameters
- cluster
name
- parameter in distributed lock manager configuration, DLM Internal Parameters
- cluster
node
- DLM control startup and shutdown, Creating OPS Startup and Shutdown Scripts (OPS 7.3.x)
- parameter in cluster manager configuration, Cluster Manager Parameters
- startup and shutdown OPS instances, Creating Packages to Launch OPS Instances (OPS 8.0.5, OPS 8.1.5 64 bit or OPS 8.1.6)
- cluster
operation
- checking , Checking Cluster Operation
- cluster
parameters
- initial configuration, Configuration of the Cluster
- OPS
8.0.5, OPS 8.0.5 Cluster Parameters, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Parameters
- cluster re-formation
time, Cluster Lock and Re-formation Time
- cluster startup
- manual, Manual Startup of Entire Cluster
- cluster
status
- viewing in SAM, Using SAM to View Cluster Status
- viewing with HP-UX commands, Using HP-UX Commands to View Cluster Status
- cluster
volume group
- creating physical volumes, Creating Physical Volumes
- parameter in cluster manager configuration, Cluster Manager Parameters
- cluster
with high availability disk array
- figure, Cluster with High Availability Disk Array
- CLUSTER_NAME
(cluster name)
- in sample configuration file, Cluster Configuration Template File
- parameter in cluster manager
configuration, Cluster Manager Parameters
- CM
- DLM
connect timeout parameter, Cluster Interface Specific DLM Parameters
- DLM
Enabled parameter, Cluster Interface Specific DLM Parameters
- DLM
enabled parameter, Cluster Interface Specific DLM Parameters, OPS 8.0.5 Cluster Parameters, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Parameters
- DLM
halt timeout parameter, Cluster Interface Specific DLM Parameters
- DLM
ping timeout parameter, Cluster Interface Specific DLM Parameters
- DLM
reconfiguration timeout parameter, Cluster Interface Specific DLM Parameters
- GMS
Enabled parameter, Cluster Interface Specific DLM Parameters
- cmapplyconf, Distributing the Configuration File with HP-UX Commands, Distributing the Binary Cluster Configuration File with HP-UX Commands
- cmcheckconf, Verifying the Cluster Configuration
- troubleshooting, Using cmquerycl and cmcheckconf
- cmclconfd
- syslog
messages, Messages Written to the System Log File
- cmcld
- diagnostic
tool;diagnostic tool
- cmcld, Core Dump Locations
- syslog
messages, Messages Written to the System Log File
- cmdeleteconf
- deleting
the cluster configuration, Deleting the Cluster Configuration
- cmdlmd
- DLM
syslog messages, If Using OPS 7.3.x
- cmdlmmon
- DLM
syslog messages, If Using OPS 7.3.x
- cmgetconfig
- diagnostic
command;diagnostic command
- cmgetconfig, Reviewing the LAN Configuration
- cmgmsd
- syslog
messages, Messages Written to the System Log File
- cmhaltcl
command;command
- cmhaltcl, Checking Cluster Operation
- cmhaltnode
command;command
- cmhaltnode, Checking Cluster Operation
- cmlkmgrd
- DLM
syslog messages, If Using OPS 7.3.x
- cmlvmd
- diagnostic
tool;diagnostic tool
- cmlvmd, Core Dump Locations
- syslog
messages, Messages Written to the System Log File
- cmmodnet
- assigning
IP addresses in control scripts, Stationary and Relocatable IP Addresses
- cmquerycl
- troubleshooting, Using cmquerycl and cmcheckconf
- using;cmcheckconf
- using, Using cmquerycl and cmcheckconf
- cmruncl
command;command
- cmruncl, Checking Cluster Operation
- cmrunnode
command;command
- cmrunnode, Checking Cluster Operation
- cmscancl
- using, Using cmscancl
- cmviewcl
- diagnostic
command;diagnostic command
- cmviewcl, Reviewing the LAN Configuration
- non-root
users, Allowing Non-Root Users to Run cmviewcl
- cmviewconf
- using, Using cmviewconf
- configuration
- ASCII
cluster configuration file template, Using MC/LockManager Commands to Configure the Cluster
- ASCII
package configuration file template, Package Configuration Template File
- basic
tasks and steps, Tasks in Configuring an MC/LockManager Cluster
- cluster
planning, Cluster Configuration Planning
- of
the cluster, Configuration of the Cluster
- package, Configuring Packages and Their Services
- package
planning, Package Configuration Planning
- service, Configuring Packages and Their Services
- configuration
file
- distribute using SAM, Distributing the Configuration File And Control Script with SAM
- for cluster manager, Configuration of the Cluster
- for DLM, DLM Configuration Files (OPS 7.3.x)
- troubleshooting, Reviewing Configuration Files
- configuration
with dual attach FDDI stations
- figure, Configuration with Dual Attach FDDI Stations
- configure
- MC/LockManager
for OPS, Configuring MC/LockManager for OPS 7.3.x, Configuring MC/LockManager for OPS 8.0.5, Configuring MC/LockManager for OPS 8.1.5 64 bit or OPS 8.1.6
- configured
packages
- specifying number, Specifying Maximum Number of Configured Packages
- configuring
- packages, Configuring in Stages
- configuring
an OPS cluster
- tasks and steps, Building an OPS Cluster Configuration
- configuring
packages and their services, Configuring Packages and Their Services
- control
script
- adding customer defined functions, Adding Customer Defined Functions to the Package Control Script
- creating with commands, Using Commands to Write the Package Control Script
- creating with SAM, Using SAM to Write the Package Control Script
- in package configuration, Writing the Package Control Script
- pathname parameter in package configuration, Package Configuration File Parameters
- starting OPS instances, Creating the Control Script for Starting OPS Instances
- troubleshooting, Reviewing the Package Control Script
- control
scripts
- copying with HP-UX commands, Copying Package Control Scripts with HP-UX commands
- creating
the package configuration, Creating the Package Configuration
- creating volume
groups, Creating Additional Volume Groups
- customer
defined functions
- adding to the control script, Adding Customer Defined Functions to the Package Control Script
D- daemons
for MC/LockManager
- display, Messages Written to the System Log File
- data
- disks, Redundant Disk Storage
- data
congestion, Heartbeat Messages
- deactivation
of volume groups, Deactivating a Shared Volume Group
- deadlock
detection interval
- parameter in distributed
lock manager configuration, DLM Internal Parameters
- deleting
the cluster configuration
- using cmdeleteconf, Deleting the Cluster Configuration
- detecting
failures
- in network manager, Monitoring LAN Interfaces and Detecting Failure
- device file
- hardware
planning, RS232 Information
- diagnostic
- networking
commands, Reviewing the LAN Configuration
- disk
- choosing
for volume groups, Selecting Disks for the Volume Group
- data, Redundant Disk Storage
- interfaces, Supported Disk Interfaces
- power
supply planning, Power Supply Planning
- root, Redundant Disk Storage
- disk
arrays
- creating logical volumes, Creating OPS Volume Groups on Disk Arrays
- disk
I/O
- hardware planning, Disk I/O Information
- disk
logical units
- hardware planning, Disk I/O Information
- disk
monitor, Monitoring of Disks with Event Monitoring Service
- disk
unit
- parameter, Cluster Manager Parameters
- disks
- in
MC/ServiceGuard, Redundant Disk Storage
- information
commands, Disk I/O Information
- replacing, Replacing Disks
- supported
types in MC/ServiceGuard, Supported Disk Interfaces
- distribute
- binary
configuration file, Distributing the Binary Configuration File
- binary
configuration file using HP-UX commands, Distributing the Configuration File with HP-UX Commands
- binary
configuration file using SAM, Distributing the Configuration File with SAM
- distributed
lock manager
- blank planning worksheet, DLM Configuration Worksheet (OPS 7.3.x)
- cluster name parameter, DLM Internal Parameters
- configuring using HP-UX commands, Using HP-UX Commands to Configure the Distributed Lock Manager (OPS 7.3.x)
- deadlock detection interval parameter, DLM Internal Parameters
- DLM communication fail timeout
parameter, Cluster Interface Specific DLM Parameters
- DLM connect timeout parameter, Cluster Interface Specific DLM Parameters
- DLM Enabled parameter, Cluster Interface Specific DLM Parameters
- DLM enabled parameter, Cluster Interface Specific DLM Parameters
- DLM halt timeout parameter, Cluster Interface Specific DLM Parameters
- DLM ping timeout parameter, Cluster Interface Specific DLM Parameters
- DLM reconfiguration timeout parameter, Cluster Interface Specific DLM Parameters
- filled in planning worksheet, DLM Configuration Worksheet (OPS 7.3.x)
- locks parameter, DLM Internal Parameters
- node IP address parameter, DLM Internal Parameters
- node name parameter, DLM Internal Parameters
- planning the configuration, Planning for OPS 7.3.x
- processes parameter, DLM Internal Parameters
- resources parameter, DLM Internal Parameters
- subnet address parameter, DLM Internal Parameters
- use in OPS cluster, How MC/LockManager Supports OPS 7.3.x
- distributing
- configuration
file using SAM, Distributing the Configuration File And Control Script with SAM
- distributing
the cluster and package configuration, Distributing and Verifying the Configuration
- DLM
- adjusting
parameter for OPS, Changing Oracle Parameters (OPS 7.3.x)
- blank
planning worksheet, DLM Configuration Worksheet (OPS 7.3.x)
- cluster
name parameter, DLM Internal Parameters
- communication
fail timeout parameter, Cluster Interface Specific DLM Parameters
- configure
for OPS, Configuring the Distributed Lock Manager (OPS 7.3.x)
- configure
for OPS using SAM, Using SAM to Configure the Distributed Lock Manager (OPS 7.3.x)
- configuring
with HP-UX commands, Using HP-UX Commands to Configure the Distributed Lock Manager (OPS 7.3.x)
- deadlock
detection interval parameter, DLM Internal Parameters
- diagnostic
tools;diagnostic tools
- DLM, Using DLM Diagnostic Tools (OPS 7.3.x)
- DLM
connect timeout parameter, Cluster Interface Specific DLM Parameters
- DLM
Enabled parameter, Cluster Interface Specific DLM Parameters
- DLM
enabled parameter, Cluster Interface Specific DLM Parameters, OPS 8.0.5 Cluster Parameters, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Parameters
- DLM
halt timeout parameter, Cluster Interface Specific DLM Parameters
- DLM
monitor interval parameter, DLM Internal Parameters
- DLM
ping timeout parameter, Cluster Interface Specific DLM Parameters
- DLM
reconfiguration timeout parameter, Cluster Interface Specific DLM Parameters
- hardware
planning, LAN Information
- locks
parameter, DLM Internal Parameters
- node
IP address parameter, DLM Internal Parameters
- node
name parameter, DLM Internal Parameters
- planning
the configuration, Planning for OPS 7.3.x
- processes
parameter, DLM Internal Parameters
- resources
parameter, DLM Internal Parameters
- state
options, DLM State (OPS 7.3.x)
- subnet
address parameter, DLM Internal Parameters
- use
in OPS cluster, How MC/LockManager Supports OPS 7.3.x
- dlm
- syslog
messages, Messages Written to the System Log File
- DLM configuration
file
- editing the ASCII template, Using HP-UX Commands to Configure the Distributed Lock Manager (OPS 7.3.x)
- on all nodes, DLM Configuration Files (OPS 7.3.x)
- DLM
connect timeout
- parameter in cluster manager
configuration, Cluster Interface Specific DLM Parameters
- DLM
control script
- startup and shutdown, Creating OPS Startup and Shutdown Scripts (OPS 7.3.x)
- DLM
Enabled
- parameter in cluster manager configuration, Cluster Interface Specific DLM Parameters
- DLM
enabled
- parameter in cluster manager configuration, Cluster Interface Specific DLM Parameters, OPS 8.0.5 Cluster Parameters, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Parameters
- DLM
halt timeout
- parameter in cluster manager configuration, Cluster Interface Specific DLM Parameters
- DLM internal
- parameters, DLM Internal Parameters
- DLM
monitor interval
- parameter in distributed lock
manager configuration, DLM Internal Parameters
- DLM
ping timeout
- parameter in cluster manager configuration, Cluster Interface Specific DLM Parameters
- DLM
reconfiguration timeout
- parameter in cluster
manager configuration, Cluster Interface Specific DLM Parameters
- DLM
subnet address
- parameter in distributed lock
manager configuration, DLM Internal Parameters
- dlm.log file, If Using OPS 7.3.x
- dlmdump
- diagnostic
tool;diagnostic tool
- dlmdump, dlmdump
- dlmstart.log
file, If Using OPS 7.3.x
- dlmstat
- diagnostic
tool;diagnostic tool
- dlmstat, dlmstat
- DTC
- using
with MC/ServiceGuard, Package Control Script Variables
- dual attach FDDI
stations, Using Dual Attach FDDI Stations
- dual
cluster locks
- choosing, Dual Cluster Lock
E- EMS
- for
disk monitoring, Monitoring of Disks with Event Monitoring Service
- for
preventive monitoring;Event Monitoring Service
- in
troubleshooting, Using Event Monitoring Service
- monitoring
package resources with, Using the Event Monitoring Service
- using
the EMS HA monitors;HA monitors (EMS);disk monitor (EMS), Using the EMS HA Monitors
- enclosure
for disks
- replacing a faulty mechanism, Replacing a Faulty Mechanism in an HA Enclosure
- error
messages, MC/LockManager Error Messages
- Event
Monitoring Service
- for disk monitoring, Monitoring of Disks with Event Monitoring Service
- event monitoring
service
- using, Using the Event Monitoring Service
- exporting
- shared
volume group data, Exporting the Logical Volume Infrastructure
- exporting files
- LVM
commands, Exporting with LVM Commands
- using
SAM, Exporting with SAM
F- failback
- automatic, Package Failover Behavior
- manual, Package Failover Behavior
- failback policy, Automatic Failback
- failback
policy parameter
- GMS configuration, Package Configuration File Parameters
- failover
- configured
node, Package Failover Behavior
- minimum
package node, Package Failover Behavior
- package
coordinator, How the Package Manager Works
- failover
behavior
- in packages, Choosing Switching and Failover Behavior
- failover
policy parameter
- GMS configuration, Package Configuration File Parameters
- failure
- kinds
of responses, Responses to Failures
- response
to hardware failures, Responses to Hardware Failures
- responses
to package and service failures, Responses to Package and Service Failures
- restarting
a service after failure, Service Restarts
- fibrechannel
interconnect in a four-node cluster
- figure;figures
- fibrechannel
interconnect in a four-node cluster, FibreChannel Interconnect in a Four-Node Cluster
- fibrechannel
switched configurations, Fibre Channel Switched Configurations
- figures
- cluster
with high availability disk array, Cluster with High Availability Disk Array
- configuration
with dual attach FDDI stations, Configuration with Dual Attach FDDI Stations
- MC/ServiceGuard
software components;MC/ServiceGuard software components
- figure, MC/LockManager Software Components
- primary
disk and mirrors on different buses, Primaries and Mirrors on Different Shared Buses
- redundant
FDDI configuration;redundant FDDI configuration
- figure, Providing Redundant FDDI Connections
- redundant
LANs;redundant LANS
- figure, Redundant Ethernet Configuration, Aggregated Networking Ports
- root
disks on different shared buses, Root Disks on Different Shared Buses
- file
locking, Avoid File Locking
- file
systems
- array variable in package control script, Package Control Script Variables
- creating for a cluster, Creating File Systems
- FIRST_CLUSTER_LOCK_PV
- in
sample configuration file, Cluster Configuration Template File
- parameter
in cluster manager configuration, Cluster Manager Parameters
- FIRST_CLUSTER_LOCK_VG
- in
sample configuration file, Cluster Configuration Template File
- floating
IP addresses
- in MC/ServiceGuard packages, Stationary and Relocatable IP Addresses
- FS
- array
variable in package control script, Package Control Script Variables
- in
sample package control script, Customizing the Package Control Script
- FS_MOUNT_OPT
- array
variable in package control script, Package Control Script Variables
- in
sample package control script, Customizing the Package Control Script
G- general
planning, General Planning
- gethostbyname
- and
package IP addresses, Stationary and Relocatable IP Addresses
- gethostbyname(), Assign Unique Names to Applications
- GMS
- blank
planning worksheet, Cluster Configuration Worksheet (OPS 8.0.5), Cluster Configuration Worksheet (OPS 8.1.5 64 bit and OPS 8.1.6)
- GMS
Enabled parameter, Cluster Interface Specific DLM Parameters
- group
membership services, How MC/LockManager Supports OPS 8.0.5, How MC/LockManager Supports OPS 8.1.5 64 bit and OPS 8.1.6
- planning
the configuration, Planning for OPS 8.0.5, Planning for OPS 8.1.5 64 bit and OPS 8.1.6
- state
options, GMS State (OPS 8.0.5)
- GMS
connect timeout parameter
- GMS configuration, OPS 8.0.5 Cluster Parameters
- GMS
Enabled
- parameter in cluster manager configuration, Cluster Interface Specific DLM Parameters
- GMS
location parameter
- GMS configuration, OPS 8.0.5 Cluster Parameters
- group
membership service
- blank planning worksheet, Cluster Configuration Worksheet (OPS 8.0.5), Cluster Configuration Worksheet (OPS 8.1.5 64 bit and OPS 8.1.6)
- DLM enabled set to NO, OPS 8.0.5 Cluster Parameters, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Parameters
- filled in planning worksheet, OPS 8.0.5 Cluster Configuration Worksheet, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Configuration Worksheet
- GMS connect timeout parameter, OPS 8.0.5 Cluster Parameters
- GMS enabled parameter, Cluster Interface Specific DLM Parameters, OPS 8.0.5 Cluster Parameters, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Parameters
- GMS location parameter, OPS 8.0.5 Cluster Parameters
- planning the configuration, Planning for OPS 8.0.5, Planning for OPS 8.1.5 64 bit and OPS 8.1.6
- group membership
services
- define, How MC/LockManager Supports OPS 8.0.5, How MC/LockManager Supports OPS 8.1.5 64 bit and OPS 8.1.6
H- HALT_SCRIPT
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- HALT_SCRIPT
parameter;parameter
- HALT_SCRIPT, Package Configuration Template File
- HALT_SCRIPT_TIMEOUT
(halt script timeout)
- in sample ASCII package
configuration file, Package Configuration Template File
- parameter in package configuration, Package Configuration File Parameters
- halting a package, Halting a Package
- halting
a package;stopping a package, Stopping the Package
- hardware
- adding
disks, Adding Disk Hardware
- blank
planning worksheet, Worksheet for Hardware Planning
- monitoring, Monitoring Hardware
- hardware
failures
- response to, Responses to Hardware Failures
- hardware
for OPS on HP-UX
- HP 9000, HP 9000 Systems
- power supplies, Redundant Power Supplies
- hardware
planning
- Disk I/O Bus Type, Disk I/O Information
- disk I/O information for shared disks, Disk I/O Information
- host IP address, LAN Information
- host name, SPU Information
- I/O bus addresses, Disk I/O Information
- I/O slot numbers, Disk I/O Information
- I/O
slots, SPU Information
- LAN interface name, LAN Information
- LAN
traffic, LAN Information
- LAN traffic type, LAN Information
- memory capacity, SPU Information
- number of I/O slots, SPU Information
- planning the configuration, Hardware Planning
- RS232 heartbeat line, RS232 Information
- S800 series number, SPU Information
- SPU information, SPU Information
- subnet, LAN Information
- worksheet, Hardware Configuration Worksheet
- heartbeat
- hardware
planning, LAN Information
- network
communication, Network Communication Failure
- RS232
line, RS232 Information
- heartbeat
interval
- parameter in cluster manager configuration, Cluster Manager Parameters
- heartbeat
line
- configuring RS232, RS232 Information
- heartbeat lines,
serial, Using a Serial (RS232) Heartbeat Line
- heartbeat
messages
- defined, Heartbeat Messages
- heartbeat
subnet address
- parameter in cluster manager
configuration, Cluster Manager Parameters
- HEARTBEAT_INTERVAL
- in
sample configuration file, Cluster Configuration Template File
- parameter
in cluster manager configuration, Cluster Manager Parameters
- HEARTBEAT_INTERVAL
(heartbeat timeout)
- parameter in cluster manager
configuration, Cluster Manager Parameters
- HEARTBEAT_IP
- in
sample configuration file, Cluster Configuration Template File
- parameter
in cluster manager configuration, Cluster Manager Parameters
- high
availability
- HA cluster defined, Redundancy of Cluster Components
- objectives in planning, General Planning
- high
availability cluster
- defined, What is an OPS Cluster?
- host IP
address
- hardware planning, LAN Information
- host
name
- hardware planning, SPU Information
- power supply planning, Power Supply Planning
- HP
9000 system
- as node in an OPS cluster, HP 9000 Systems
- HP
Predictive monitoring
- in troubleshooting;Predictive
monitoring, Using HP Predictive Monitoring
- HP-UX
commands
- using to configure distributed lock
manager, Using HP-UX Commands to Configure the Distributed Lock Manager (OPS 7.3.x)
- using to test cluster reconfiguration, Using HP-UX Commands to Test Cluster Halt and Reconfiguration
- HP-UX
shared memory
- allocating, Setting HP-UX Shared Memory Allocation
I- I/O bus
addresses
- hardware planning, Disk I/O Information
- I/O
slots
- hardware planning, SPU Information, Disk I/O Information
- identifying
cluster-aware volume groups, Identifying Volume Groups for Packages
- in-line
terminator
- permitting online hardware maintenance, Online Hardware Maintenance with In-line SCSI Terminator
- installing
software
- MC/LockManager, Installing MC/LockManager
- Oracle Parallel Server, Installing Oracle Parallel Server
- interface
name
- hardware planning, LAN Information
- internal
parameters
- for DLM configuration, DLM Configuration Files (OPS 7.3.x)
- IP
- in
sample package control script, Customizing the Package Control Script
- IP
address array variable in package control script, Package Control Script Variables
- IP address
- adding and deleting in packages, Adding and Deleting Relocatable IP Addresses
- for
nodes and packages, Stationary and Relocatable IP Addresses
- hardware planning, LAN Information
- portable, Stationary and Relocatable IP Addresses
- reviewing
for packages, Reviewing Package IP Addresses
- switching, Remote Switching
- ip address
- hardware
planning, LAN Information
L- LAN
- heartbeat, Heartbeat Messages
- interface
name, LAN Information
- replacing
card, Replacing a LAN Card
- LAN
failure
- MC/ServiceGuard behavior;MC/ServiceGuard
behavior
- in LAN failure, Redundancy of Cluster Components
- LAN
interfaces
- monitoring with network manager, Monitoring LAN Interfaces and Detecting Failure
- primary and secondary, Redundant Network Components
- LAN planning
- host
IP address, LAN Information
- traffic type, LAN Information
- LAN traffic
- hardware
planning, LAN Information
- lancscan
- diagnostic
command;diagnostic command
- lanscan, Reviewing the LAN Configuration
- landiag
- diagnostic
command;diagnostic command
- landiag, Reviewing the LAN Configuration
- link-level addresses, Avoid Using SPU IDs or MAC Addresses
- linkloop
- diagnostic
command;diagnostic command
- linkloop, Reviewing the LAN Configuration
- local
switching, Local Switching
- parameter in package configuration, Package Configuration File Parameters
- lock
- cluster
locks and power supplies, Redundant Power Supplies
- use
of the cluster lock;use of the cluster lock, Use of the Cluster Lock
- lock
disk
- replacing a faulty mechanism, Replacing a Lock Disk
- lock volume group
- changing configuration, Changing Lock Volume Group Configuration
- identifying in configuration file, Identifying the Cluster Lock Volume Group and Disk
- planning, Choosing the Cluster Lock Volume Group, Cluster Lock and Re-formation Time, Heartbeat Subnet and Re-formation Time
- locks
- parameter
in distributed lock manager configuration, DLM Internal Parameters
- LOG_DEATH
- syslog
messages, Messages Written to the System Log File
- LOG_ERROR
- syslog
messages, Messages Written to the System Log File
- LOG_EXTERNAL
- syslog
messages, Messages Written to the System Log File
- LOG_INTERNAL
- syslog
messages, Messages Written to the System Log File
- LOG_PERIODIC
- syslog
messages, Messages Written to the System Log File
- logical volume manager, Disk I/O Information
- logical
volumes
- array variable in package control script, Package Control Script Variables
- blank planning worksheet, Logical Volume Worksheet
- creating, Creating Logical Volumes for OPS
- creating the infrastructure, Creating the Logical Volume Infrastructure for OPS
- disk arrays, Creating OPS Volume Groups on Disk Arrays
- filled in planning worksheet, Logical Volume Planning Worksheet
- using
SAM, Creating Package Volume Groups with Mirrored Individual Data Disks
- with packages, Creating Logical Volumes for Use with Packages
- logical
volumes for disk storage
- planning, Planning Logical Volumes
- logs
- and
message types, Reviewing the System Log File
- lssf
- using
to obtain a list of disks, Selecting Disks for the Volume Group
- LV
- array
variable in package control script, Package Control Script Variables
- in
sample package control script, Customizing the Package Control Script
- lvextend
- creating
a root mirror with, Creating Mirrors of Root Logical Volumes
- LVM
- creating
a root mirror, Creating Mirrors of Root Logical Volumes
- creating
file systems, Logical Volume and Filesystem Planning
- creating
logical volumes, Logical Volume and Filesystem Planning
- creating
on disk arrays, Creating OPS Volume Groups on Disk Arrays
- creating
volume groups, Logical Volume and Filesystem Planning
- disks, Redundant Disk Storage
- distributing
package volume groups, Distributing the Package Volume Group to Other Nodes
- setting
up volume groups on another node, Distributing the Package Volume Group to Other Cluster Nodes with SAM, Distributing the Package Volume Group to Other Cluster Nodes with LVM Commands
- LVM commands
- exporting
files, Exporting with LVM Commands
M- MAC
addresses, Avoid Using SPU IDs or MAC Addresses
- maintaining
an OPS cluster, Cluster and Package Maintenance
- maintenance
- adding
disk hardware, Adding Disk Hardware
- making
changes to shared volume groups, Making Changes to Shared Volume Groups (HP-UX Commands Only)
- modifying
the cluster configuration, Changing the Permanent Cluster Configuration
- starting
and stopping nodes, Starting and Stopping Individual Nodes
- starting
and stopping the cluster, Starting and Stopping the Cluster
- viewing
cluster status with HP-UX commands, Using HP-UX Commands to View Cluster Status
- viewing
shared volume group status, Viewing the Status of Volume Groups, Reviewing the Status of Shared Volume Groups
- man
pages
- list of pages available for MC/ServiceGuard, MC/LockManager Commands
- manual
cluster startup, Manual Startup of Entire Cluster
- MAX_CONFIGURED_PACKAGES
- parameter
in cluster manager configuration, Cluster Manager Parameters
- maximum
number of nodes, Redundancy of Cluster Components
- MC/LockManager
- adding
commands to functions, Adding MC/LockManager Commands in Customer Defined Functions
- installing, Installing MC/LockManager
- introducing, MC/LockManager at a Glance, Understanding MC/LockManager Hardware Configurations, Understanding MC/LockManager Software Components
- MC/ServiceGuard
commands
- using to configure package, Using MC/LockManager Commands to Create a Package
- membership
change
- reasons for, Dynamic Cluster Re-formation
- memory allocation
- setting, Setting HP-UX Shared Memory Allocation
- memory
capacity
- hardware planning, SPU Information
- messages
- types, Reviewing the System Log File
- mkboot
- creating
a root mirror with, Creating Mirrors of Root Logical Volumes
- monitored
non-heartbeat subnet
- parameter in cluster manager
configuration, Cluster Manager Parameters
- monitored
resource failure
- MC/ServiceGuard behavior;MC/ServiceGuard
behavior
- in monitored resource failure, Redundancy of Cluster Components
- monitoring hardware, Monitoring Hardware
- monitoring
LAN interfaces
- in network manager, Monitoring LAN Interfaces and Detecting Failure
- movement
errors
- packages, Package Movement Errors
- moving a package, Moving a Package
N- NET_SWITCHING_ENABLED
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- netstat
- diagnostic
command;diagnostic command
- netstat, Reviewing the LAN Configuration
- network
- adding
and deleting package IP addresses, Adding and Deleting Relocatable IP Addresses
- failure, Local Switching
- load
sharing with IP addresses;load sharing with IP addresses, Load Sharing
- local
interface switching, Local Switching
- local
switching, Local Switching
- redundancy, Redundant Ethernet Configuration, Using a Serial (RS232) Heartbeat Line
- remote
system switching, Remote Switching
- status, Network Status
- network
components
- in MC/ServiceGuard;understanding
network components in MC/ServiceGuard, Redundant Network Components
- network
manager
- adding and deleting package IP addresses, Adding and Deleting Relocatable IP Addresses
- main functions;how the network manager
works, How the Network Manager Works
- monitoring LAN interfaces, Monitoring LAN Interfaces and Detecting Failure
- network
planning
- subnet, LAN Information
- network
polling interval (NETWORK_POLLING_INTERVAL)
- parameter
in cluster manager configuration, Cluster Manager Parameters
- network
time protocol (NTP)
- for clusters, Enabling the Network Time Protocol
- NETWORK_INTERFACE
- in
sample configuration file, Cluster Configuration Template File
- NETWORK_POLLING_INTERVAL
(network polling interval)
- in sample configuration
file, Cluster Configuration Template File
- networking
- redundant
subnets, LAN Information
- networks
- binding
to IP addresses, Bind to Relocatable IP Addresses
- binding
to port addresses, Bind to a Fixed Port
- IP
addresses and naming, Avoid Node Specific Information
- node
and package IP addresses, Stationary and Relocatable IP Addresses
- packages
using IP addresses, Assign Unique Names to Applications
- supported
types in MC/ServiceGuard, Redundant Network Components
- writing
network applications as HA services, Define Application Startup and Shutdown
- no cluster locks
- choosing, No Cluster Lock
- node
- basic
concepts, Redundancy of Cluster Components
- halting
status;status
- halting node, Status After Halting a Node
- in
an OPS cluster, What is an OPS Cluster?
- IP
addresses, Stationary and Relocatable IP Addresses
- package
failures;network
- package failures, Node and Network Failures
- removing
from a cluster in SAM, Using SAM to Remove a Node from the Cluster Temporarily
- removing
from a cluster using HP-UX Commands, Using HP-UX Commands to Remove a Node from the Cluster Temporarily
- returning
to a cluster using HP-UX Commands, Using HP-UX Commands to Return a Node to the Cluster
- returning
to a cluster using SAM, Using SAM to Return a Node to the Cluster
- status
and state, Node Status and State
- node
IP address
- parameter in distributed lock manager
configuration, DLM Internal Parameters
- node name
- hardware
planning, RS232 Information
- parameter in distributed lock manager configuration, DLM Internal Parameters
- NODE_FAIL_FAST_ENABLED
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- NODE_FAIL_FAST_ENABLED
parameter;parameter
- NODE_FAIL_FAST_ENABLED, Package Configuration Template File
- NODE_FAILFAST_ENABLED
parameter;parameter
- NODE_FAILFAST_ENABLED, Creating Packages to Launch OPS Instances (OPS 8.0.5, OPS 8.1.5 64 bit or OPS 8.1.6)
- NODE_NAME
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in cluster manager configuration, Cluster Manager Parameters
- NODE_NAME
parameter;parameter
- NODE_NAME, Package Configuration Template File
- NODE_TIMEOUT
(heartbeat timeout)
- in sample configuration
file, Cluster Configuration Template File
- NODE_TIMEOUT
(node timeout)
- parameter in cluster manager
configuration, Cluster Manager Parameters
- NTP
- time
protocol for clusters, Enabling the Network Time Protocol
O- online
hardware maintenance
- by means of in-line SCSI
terminators, Online Hardware Maintenance with In-line SCSI Terminator
- OPS
- configure
Distributed Lock Manager, Configuring the Distributed Lock Manager (OPS 7.3.x)
- configure
DLM using SAM, Using SAM to Configure the Distributed Lock Manager (OPS 7.3.x)
- configure
MC/LockManager, Configuring MC/LockManager for OPS 7.3.x, Configuring MC/LockManager for OPS 8.0.5, Configuring MC/LockManager for OPS 8.1.5 64 bit or OPS 8.1.6
- control
scripts for starting instances, Creating the Control Script for Starting OPS Instances
- DLM
control startup and shutdown, Creating OPS Startup and Shutdown Scripts (OPS 7.3.x)
- group
membership services, How MC/LockManager Supports OPS 8.0.5, How MC/LockManager Supports OPS 8.1.5 64 bit and OPS 8.1.6
- overview
of configuration, What is an OPS Cluster?
- packages
to access database, Configuring Packages that Access the OPS Database
- startup
and shutdown instances, Creating Packages to Launch OPS Instances (OPS 8.0.5, OPS 8.1.5 64 bit or OPS 8.1.6)
- startup
and shutdown volume groups, Using Packages to Start and Stop OPS (OPS 8.0.5, OPS 8.1.5 64 bit or OPS 8.1.6)
- status, Status of (OPS 8.1.5 64 bit or OPS 8.1.6)
- OPS 8.0.5
- cluster
parameters, OPS 8.0.5 Cluster Parameters, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Parameters
- OPS cluster
- defined, What is an OPS Cluster?
- maintaining, Cluster and Package Maintenance
- starting up with scripts, Starting Up the Oracle Instance
- tasks and steps in building, Building an OPS Cluster Configuration
- testing cluster reconfiguration using
SAM, Using SAM to Test Cluster Halt and Reconfiguration
- testing reconfiguration using HP-UX
commands, Using HP-UX Commands to Test Cluster Halt and Reconfiguration
- OPS
software
- installing, Installing Oracle Parallel Server
- opsctl.ctl
- Oracle
demo database files, Required Oracle File Names for Demo Database
- opsdata.dbf
- Oracle
demo database files, Required Oracle File Names for Demo Database
- opslog.log
- Oracle
demo database files, Required Oracle File Names for Demo Database
- Oracle
- demo
database files;demo database
- files, Oracle Demo Database Files
- Oracle executable
- relinking, Relinking
- Oracle
Parallel Server
- installing, Installing Oracle Parallel Server
- starting up instances, Starting Up the Oracle Instance
- Oracle
parameters
- adjusting DLM parameters, Changing Oracle Parameters (OPS 7.3.x)
P- package
- adding
and deleting package IP addresses, Adding and Deleting Relocatable IP Addresses
- basic
concepts, Using Packages in an OPS Cluster, Redundancy of Cluster Components
- failback, Package Failover Behavior
- halting, Stopping the Package, Halting a Package
- halting
status, Status After Halting a Package--OPS 7.3.x
- local
interface switching, Local Switching
- moving, Moving a Package
- moving
status;status
- moving package, Status After Moving the Package to Another Node
- primary
node, Package Failover Behavior
- reconfiguring, Reconfiguring the Package
- remote
switching, Remote Switching
- running, Running Application Services
- starting, Starting a Package
- status
and state, Package Status and State
- switching
status;status
- switching package, Status After Package Switching is Enabled
- transfer
of control;package
- TOC, Package Failover Behavior
- package
administration, Managing Packages and Services
- solving problems, Solving Package Problems
- package
configuration
- additional package resource parameter, Package Configuration File Parameters
- automatic switching parameter, Package Configuration File Parameters
- distributing the configuration
file, Distributing and Verifying the Configuration
- failback policy parameter, Package Configuration File Parameters
- failover policy parameter, Package Configuration File Parameters
- in SAM, Using SAM to Configure a Package
- local switching parameter, Package Configuration File Parameters
- node name parameter, Package Configuration File Parameters
- package failfast parameter, Package Configuration File Parameters
- package name parameter, Package Configuration File Parameters
- planning, Package Configuration Planning
- resource polling interval parameter, Package Configuration File Parameters
- resource up parameter, Package Configuration File Parameters
- run and halt script timeout parameters, Package Configuration File Parameters
- service fail fast parameter, Package Configuration File Parameters
- service halt timeout parameter, Package Configuration File Parameters
- service name parameter, Package Configuration File Parameters
- step by step, Configuring Packages and Their Services
- subnet parameter, Package Configuration File Parameters
- using HP-UX commands, Using MC/LockManager Commands to Create a Package
- verifying the configuration, Distributing and Verifying the Configuration
- writing the package control script, Writing the Package Control Script
- package
configuration file, Package Configuration Template File
- package control script, Running Application Services
- file systems, Package Control Script Variables
- generating with commands, Using Commands to Write the Package Control Script
- IP addresses, Package Control Script Variables
- logical volumes, Package Control Script Variables
- service command, Package Control Script Variables
- service name, Package Control Script Variables
- service restart variable, Package Control Script Variables
- subnets, Package Control Script Variables
- volume groups, Package Control Script Variables
- worksheet, Package Configuration Worksheet
- package
coordinator
- defined, Heartbeat Messages
- package
failfast
- parameter in package configuration, Package Configuration File Parameters
- package
failover behavior, Choosing Switching and Failover Behavior
- package
failures
- responses, Responses to Package and Service Failures
- package
IP address
- defined;relocatable IP address
- defined;floating
IP address, Stationary and Relocatable IP Addresses
- package IP addresses
- defined, Stationary and Relocatable IP Addresses
- reviewing, Reviewing Package IP Addresses
- package
manager
- blank planning worksheet, Package Configuration Worksheet
- main functions;how the package manager
works, How the Package Manager Works
- startup policies, Startup Policies
- package
name
- parameter in package configuration, Package Configuration File Parameters
- package
node
- default
behavior, Package Failover Behavior
- failover, Package Failover Behavior
- package
switching
- service fails, Package Failover Behavior
- PACKAGE_NAME
- in
sample ASCII package configuration file, Package Configuration Template File
- packages
- accessing
OPS database, Configuring Packages that Access the OPS Database
- adding
MC/LockManager commands, Adding MC/LockManager Commands in Customer Defined Functions
- configuration
stages, Configuring in Stages
- copying
control scripts, Copying Package Control Scripts with HP-UX commands
- creating
logical volumes, Creating Logical Volumes for Use with Packages
- creating
volume groups, Creating Volume Groups for Packages
- deciding
where and when to run;deciding when and where to run packages, Deciding When and Where to Run and Halt Packages
- halting
using HP-UX commands, Using HP-UX Commands to Halt a Package
- halting
using SAM, Using SAM to Halt a Package
- launching
OPS instances, Creating Packages to Launch OPS Instances (OPS 8.0.5, OPS 8.1.5 64 bit or OPS 8.1.6)
- movement
errors, Package Movement Errors
- moving
using HP-UX commands, Using HP-UX Commands to Move a Running Package.
- moving
using SAM, Using SAM to Move a Running Package
- node
and network failures, Node and Network Failures
- starting
using HP-UX commands, Using HP-UX Commands to Start a Package
- starting
using SAM, Using SAM to Start a Package
- startup
and shutdown volume groups, Using Packages to Start and Stop OPS (OPS 8.0.5, OPS 8.1.5 64 bit or OPS 8.1.6)
- system
administration errors, System Administration Errors
- verifying
configuration, Verifying Cluster and Package Configuration
- parameter
- disk
unit, Cluster Manager Parameters
- DLM
internal, DLM Internal Parameters
- parameters
- for
DLM configuration, DLM Configuration Files (OPS 7.3.x)
- for
failover, Choosing Switching and Failover Behavior
- parameters
for cluster manager
- initial configuration, Configuration of the Cluster
- permanent
cluster configuration
- modifying, Changing the Permanent Cluster Configuration
- physical
volume
- for cluster lock, Use of the Cluster Lock
- parameter in cluster lock configuration, Cluster Manager Parameters
- physical
volumes
- creating for clusters, Creating Physical Volumes
- filled in planning worksheet, Physical Volumes and PV Links Worksheet, Physical Volumes and PV Links Worksheet
- physical
volumes for disk storage
- planning, Planning Physical Volumes and PV Links
- PKG_SWITCHING
ENABLED
- parameter in package configuration, Package Configuration File Parameters
- PKG_SWITCHING_ENABLED
- in
sample ASCII package configuration file, Package Configuration Template File
- PKG_SWTICHING_ENABLED
parameter;parameter
- PKG_SWITCHING_ENABLED, Creating Packages to Launch OPS Instances (OPS 8.0.5, OPS 8.1.5 64 bit or OPS 8.1.6)
- planning
- cluster
configuration, Cluster Configuration Planning
- cluster
lock, Choosing the Cluster Lock Volume Group
- cluster
manager configuration, Cluster Manager Parameters
- disk
I/O information, Disk I/O Information
- disk
storage, Shared Logical Volume Planning
- distributed
lock manager configuration, Planning for OPS 7.3.x
- group
membership service configuration, Planning for OPS 8.0.5, Planning for OPS 8.1.5 64 bit and OPS 8.1.6
- hardware
configuration, Hardware Planning
- high
availability objectives, General Planning
- logical
volumes for disk storage, Planning Logical Volumes
- overview, Planning and Documenting and OPS Cluster
- package
configuration, Package Configuration Planning
- physical
volumes and physical volume groups for disk storage, Planning Physical Volumes and PV Links
- power, Power Supply Planning
- resource
monitoring, Monitoring Registered Package Resources
- SCSI
addresses, Setting SCSI Addresses for the Largest Expected Cluster Size
- shared
logical volumes, Shared Logical Volume Planning
- SPU
information, SPU Information
- volume
groups;volume groups
- planning, Planning Volume Groups
- worksheet
for physical volume planning, Physical Volumes and PV Links Worksheet
- worksheets, Hardware Configuration Worksheet
- worksheets
for cluster manager planning, DLM Configuration Worksheet (OPS 7.3.x)
- worksheets
for GMS configuration, OPS 8.0.5 Cluster Configuration Worksheet, OPS 8.1.5 64 bit and OPS 8.1.6 Cluster Configuration Worksheet
- worksheets
for logical volume planning, Logical Volume Planning Worksheet
- worksheets
for physical volume planning, Physical Volumes and PV Links Worksheet
- planning
and documenting an HA cluster, Planning and Documenting and OPS Cluster
- planning
worksheets
- blanks, Blank Planning Worksheets
- point
of failure
- in networking, Redundant Ethernet Configuration, Using a Serial (RS232) Heartbeat Line
- ports
- dual
and single aggregated, Automatic Port Aggregation
- power
- power
supply planning, Power Supply Planning
- power
planning
- power sources, Power Supply Planning
- worksheet, Power Supply Configuration Worksheet
- power
supplies
- blank planning worksheet, Worksheet for Hardware Planning
- power
supply
- and cluster lock, Redundant Power Supplies
- UPS for OPS on HP-UX, Redundant Power Supplies
- primary
disks and mirrors on different buses
- figure, Primaries and Mirrors on Different Shared Buses
- primary
LAN interfaces
- defined, Redundant Network Components
- primary network
interface, Redundant Network Components
- processes
- parameter
in distributed lock manager configuration, DLM Internal Parameters
- pvcreate
- creating
a root mirror with, Creating Mirrors of Root Logical Volumes
- PVG-strict
mirroring
- creating volume groups with, Creating a Volume Group.
R- raw volumes, Use Raw Volumes
- re-formation
- of
cluster, Dynamic Cluster Re-formation
- re-formation
time, Cluster Lock and Re-formation Time
- reconfiguring a package, Reconfiguring the Package
- recovery time, Cluster Configuration Planning
- redundancy
- in
networking, Redundant Ethernet Configuration, Using a Serial (RS232) Heartbeat Line
- of
cluster components, Redundancy of Cluster Components
- redundancy
in network interfaces, Redundant Network Components
- redundant
Ethernet configuration;Ethernet
- redundant configuration, Redundant Ethernet Configuration
- redundant FDDI
connections, Providing Redundant FDDI Connections
- relinking Oracle
executable, Relinking
- relocatable
IP addresses
- in MC/ServiceGuard packages, Stationary and Relocatable IP Addresses
- remote
switching, Remote Switching
- removing
- cluster
id, Redeploying Previously Configured Volume Groups
- removing
a node from a cluster
- in SAM, Using SAM to Remove a Node from the Cluster Temporarily
- using HP-UX Commands, Using HP-UX Commands to Remove a Node from the Cluster Temporarily
- removing
MC/ServiceGuard from a system, Removing MC/LockManager from a System
- replacing
disks, Replacing Disks
- resource monitoring
- planning, Monitoring Registered Package Resources
- Resource
Name
- parameter in package configuration, Package Configuration File Parameters
- resource
polling interval
- parameter in package configuration, Package Configuration File Parameters
- resource
up interval
- parameter in package configuration, Package Configuration File Parameters
- RESOURCE_NAME
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- RESOURCE_NAME
parameter;parameter
- RESOURCE_NAME, Package Configuration Template File
- RESOURCE_POLLING_INTERVAL
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- RESOURCE_POLLING_INTERVAL
parameter;parameter
- RESOURCE_POLLING_INTERVAL, Package Configuration Template File
- RESOURCE_UP_VALUE
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- RESOURCE_UP_VALUE
parameter;parameter
- RESOURCE_UP_VALUE, Package Configuration Template File
- resources
- disks, Redundant Disk Storage
- parameter
in distributed lock manager configuration, DLM Internal Parameters
- responses
- to
cluster events, Responding to Cluster Events Affecting Packages
- to
hardware failures, Responses to Hardware Failures
- to
package and service failures, Responses to Package and Service Failures
- responses to failure, Responses to Failures
- restart
- automatic
restart of cluster, Automatic Cluster Restart
- following
failure, Service Restarts
- SERVICE_RESTART
variable in package control script, Package Control Script Variables
- restartable
transactions, Use Restartable Transactions
- returning
a node to a cluster
- using HP-UX Commands, Using HP-UX Commands to Return a Node to the Cluster
- using SAM, Using SAM to Return a Node to the Cluster
- rhosts file
- for
security, Editing Security Files
- rollback.dbf
- Oracle
demo database files, Required Oracle File Names for Demo Database
- root
disk limitations on shared buses, Root Disk Limitations on Shared Buses
- root
disks on different shared buses
- figure, Root Disks on Different Shared Buses
- root mirror
- creating
with LVM, Creating Mirrors of Root Logical Volumes
- rotating standby, Automatic Rotating Standby
- RS232
- network
communication, Network Communication Failure
- RS232 connection
- for
heartbeats, RS232 Information
- RS232
heartbeat line, configuring, RS232 Information
- RS232 serial
heartbeat line, Using a Serial (RS232) Heartbeat Line
- RS232
status, viewing, Viewing RS232 Status
- RUN_SCRIPT
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- RUN_SCRIPT
parameter;parameter
- RUN_SCRIPT, Package Configuration Template File
- RUN_SCRIPT_TIMEOUT
- in
sample ASCII package configuration file, Package Configuration Template File
- RUN_SCRIPT_TIMEOUT
(run script timeout)
- parameter in package configuration, Package Configuration File Parameters
- running
packages, Running Application Services
S- S800
series number
- hardware planning, SPU Information
- S800
system
- as node in an OPS cluster, HP 9000 Systems
- SAM
- exporting
files, Exporting with SAM
- using
to configure cluster, Using SAM to Configure the Cluster
- using
to configure packages, Using SAM to Configure a Package
- using
to test cluster reconfiguration, Using SAM to Test Cluster Halt and Reconfiguration
- SCSI addressing, Setting SCSI Addresses for the Largest Expected Cluster Size
- SECOND_CLUSTER_LOCK_PV
- parameter
in cluster manager configuration, Cluster Manager Parameters
- security
- editing
files, Editing Security Files
- serial (RS232)
heartbeat line, Using a Serial (RS232) Heartbeat Line
- serial
heartbeat connections
- identifying, Identifying Serial Heartbeat Connections
- serial
line
- status, Serial Line Status
- serial port
- using
for heartbeats, RS232 Information
- SERIAL_DEVICE_FILE(RS232)
- parameter
in cluster manager configuration, Cluster Manager Parameters
- series
number
- hardware planning, SPU Information
- service
- status, Service Status
- service administration, Managing Packages and Services
- service
command
- variable in package control script, Package Control Script Variables
- service
configuration
- step by step, Configuring Packages and Their Services
- service
fail fast
- parameter in package configuration, Package Configuration File Parameters
- service
failures
- responses, Responses to Package and Service Failures
- service
halt timeout
- parameter in package configuration, Package Configuration File Parameters
- service monitor
- how
it works, Service Monitor
- service
name
- parameter in package configuration, Package Configuration File Parameters
- variable in package control script, Package Control Script Variables
- service
restart counter
- resetting, Resetting the Service Restart Counter
- service
restart parameter
- variable in package control
script, Package Control Script Variables
- SERVICE_CMD
- array
variable in package control script, Package Control Script Variables
- in
sample package control script, Customizing the Package Control Script
- SERVICE_FAIL_FAST_ENABLED
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- SERVICE_FAIL_FAST_ENABLED
parameter;parameter
- SERVICE_FAIL_FAST_ENABLED, Package Configuration Template File
- SERVICE_HALT_TIMEOUT
- in
sample ASCII package configuration file, Package Configuration Template File
- parameter
in package configuration, Package Configuration File Parameters
- SERVICE_HATL_TIMEOUT
parameter;parameter
- SERVICE_HALT_TIMEOUT, Package Configuration Template File
- SERVICE_NAME
- array
variable in package control script, Package Control Script Variables
- in
sample ASCII package configuration file, Package Configuration Template File
- in
sample package control script, Customizing the Package Control Script
- parameter
in package configuration, Package Configuration File Parameters
- SERVICE_NAME
parameter;parameter
- SERVICE_NAME, Package Configuration Template File
- SERVICE_RESTART
- array
variable in package control script, Package Control Script Variables
- in
sample package control script, Customizing the Package Control Script
- shared
disks
- planning, Disk I/O Information
- shared
logical volumes
- planning, Shared Logical Volume Planning
- shared
mode
- activation of volume groups, Activating a Volume Group in Shared Mode (HP-UX Commands Only)
- deactivation of volume groups, Deactivating a Shared Volume Group
- shared
volume groups
- making volume groups shareable, Making Volume Groups Shareable (HP-UX Commands Only)
- viewing status, Viewing the Status of Volume Groups, Reviewing the Status of Shared Volume Groups
- sharing
volume groups, Exporting the Logical Volume Infrastructure
- shutdown
- DLM
control script, Creating OPS Startup and Shutdown Scripts (OPS 7.3.x)
- single
cluster lock
- choosing, Single Cluster Lock
- single-node
operation, Single-Node Operation
- SLVM
- making
volume groups shareable, Making Volume Groups Shareable (HP-UX Commands Only)
- SNA
applications, Use Multiple Destinations for SNA Applications
- software
failure
- MC/ServiceGuard behavior;MC/ServiceGuard
behavior
- in software failure, Redundancy of Cluster Components
- solving
problems, Solving Package Problems
- SPU
information
- planning, SPU Information
- standby
- hardware
planning, LAN Information
- standby LAN
interfaces
- defined, Redundant Network Components
- standby
network interface, Redundant Network Components
- starting a cluster
- in
SAM, Using SAM to Start the Cluster
- with HP-UX Commands, Using HP-UX Commands to Start the Cluster
- starting a package, Starting a Package
- startup
- DLM
control script, Creating OPS Startup and Shutdown Scripts (OPS 7.3.x)
- startup
of cluster
- manual, Manual Startup of Entire Cluster
- state
- cluster;state, Examples of Cluster and Package States
- DLM, DLM State (OPS 7.3.x)
- GMS, GMS State (OPS 8.0.5)
- node, Node Status and State
- of
cluster and package, Reviewing Cluster and Package States
- package, Package Status and State
- stationary IP addresses, Stationary and Relocatable IP Addresses
- STATIONARY_IP
- parameter
in cluster manager configuration, Cluster Manager Parameters
- status
- cluster, Cluster Status
- halting
package, Status After Halting a Package--OPS 7.3.x
- network, Network Status
- node, Node Status and State
- normal
running OPS, Normal Running Status--OPS 8.0.5, OPS 8.1.5 64 bit and OPS 8.1.6
- of
cluster and package, Reviewing Cluster and Package States
- OPS, Status of (OPS 8.1.5 64 bit or OPS 8.1.6)
- package, Package Status and State
- package
IP address, Reviewing Package IP Addresses
- serial
line, Serial Line Status
- service, Service Status
- stopping a cluster
- in
SAM, Using SAM to Stop the Cluster
- with HP-UX Commands, Using HP-UX Commands to Stop the Cluster
- SUBNET
- array
variable in package control script, Package Control Script Variables
- in
sample ASCII package configuration file, Package Configuration Template File
- in
sample package control script, Customizing the Package Control Script
- parameter
in package configuration, Package Configuration File Parameters
- subnet
- hardware
planning, LAN Information
- parameter
in package configuration, Package Configuration File Parameters
- subnet
name
- hardware planning, LAN Information
- SUBNET
parameter;parameter
- SUBNET, Package Configuration Template File
- supported configurations
- S800, SPU Information
- supported
disks in MC/ServiceGuard, Supported Disk Interfaces
- supported
networks in MC/ServiceGuard, Redundant Network Components
- switching
- ARP
messages after switching, ARP Messages after Switching
- local
interface switching, Local Switching
- remote
system switching, Remote Switching
- switching IP addresses, Remote Switching
- syslog
file
- messages, Messages Written to the System Log File
- OPS
7.3.x entries, If Using OPS 7.3.x
- OPS
8.0.5, If Using OPS 8.0.5
- OPS 8.1.5 64 bit or OPS 8.1.6, If Using OPS 8.1.5 64 bit or OPS 8.1.6
- sample
entries, Sample System Log Entries
- system
administration errors
- packages, System Administration Errors
- system
message
- changing for clusters, Changing the System Message
- system.dbf
- Oracle
demo database files, Required Oracle File Names for Demo Database
T- tape
- power
supply planning, Power Supply Planning
- tasks
in MC/ServiceGuard configuration
- figure;figures
- tasks
in configuring an MC/ServiceGuard cluster, Tasks in Configuring an MC/LockManager Cluster
- temp.dbf
- Oracle
demo database files, Required Oracle File Names for Demo Database
- template
- ASCII
cluster configuration file, Using MC/LockManager Commands to Configure the Cluster
- ASCII
package configuration file, Package Configuration Template File
- testing
cluster reconfiguration
- using HP-UX commands, Using HP-UX Commands to Test Cluster Halt and Reconfiguration
- using SAM, Using SAM to Test Cluster Halt and Reconfiguration
- time protocol
(NTP)
- for clusters, Enabling the Network Time Protocol
- TOC
- when
a node fails, Transfer of Control (TOC) When a Node Fails
- tools.dbf
- Oracle
demo database files, Required Oracle File Names for Demo Database
- traffic
type
- LAN hardware planning, LAN Information
- troubleshooting
- approaches, Troubleshooting Approaches
- monitoring
hardware, Monitoring Hardware
- replacing
disks, Replacing Disks
- reviewing
control scripts, Reviewing the Package Control Script
- reviewing
package IP addresses, Reviewing Package IP Addresses
- using
cmquerycl and cmcheckconf, Using cmquerycl and cmcheckconf
V- verifying
- cluster
configuration, Verifying Cluster and Package Configuration
- package
configuration, Verifying Cluster and Package Configuration
- verifying
cluster configuration, Verifying the Cluster Configuration
- verifying
the cluster and package configuration, Distributing and Verifying the Configuration
- VG
- array
variable in package control script, Package Control Script Variables
- in
sample package control script, Customizing the Package Control Script
- vgcfgbackup
- and
cluster lock data, Storing Volume Group and Cluster Lock Configuration Data
- vgextend
- creating
a root mirror with, Creating Mirrors of Root Logical Volumes
- vgimport
- using
to set up volume groups on another node, Distributing the Package Volume Group to Other Cluster Nodes with LVM Commands
- viewing cluster
status in SAM, Using SAM to View Cluster Status
- viewing
cluster status with HP-UX commands, Using HP-UX Commands to View Cluster Status
- viewing RS232 status, Viewing RS232 Status
- volume group
- array variable in package control script, Package Control Script Variables
- creating for a cluster, Creating a Volume Group.
- creating physical volumes for clusters, Creating Physical Volumes
- distributing to nodes, Distributing the Package Volume Group to Other Nodes
- for
cluster lock, Use of the Cluster Lock
- setting up on another node with LVM Commands, Distributing the Package Volume Group to Other Cluster Nodes with LVM Commands
- setting up on another node with SAM, Distributing the Package Volume Group to Other Cluster Nodes with SAM
- volume
groups
- adding shared volume groups, Adding Additional Shared Volume Groups
- creating, Creating Additional Volume Groups
- displaying for OPS, Displaying the Logical Volume Infrastructure
- exporting to other nodes, Exporting the Logical Volume Infrastructure
- for
packages, Creating Volume Groups for Packages
- making changes to shared volume groups, Making Changes to Shared Volume Groups (HP-UX Commands Only)
- making
shareable, Making Volume Groups Shareable (HP-UX Commands Only)
- making
unshareable, Making a Volume Group Unshareable
- on disk arrays;disk arrays
- volume
groups, Creating Package Volume Groups on Disk Arrays
- OPS startup and shutdown, Using Packages to Start and Stop OPS (OPS 8.0.5, OPS 8.1.5 64 bit or OPS 8.1.6)
- prevent auto activation, Preventing Automatic Activation of Volume Groups
- removing volume groups, Redeploying Previously Configured Volume Groups
- shared
mode, Identifying OPS Volume Groups
- used by OPS, Identifying OPS Volume Groups
- using
SAM, Creating Package Volume Groups with Mirrored Individual Data Disks
- viewing status, Viewing the Status of Volume Groups, Reviewing the Status of Shared Volume Groups
- VOLUME_GROUP
- in
sample configuration file, Cluster Configuration Template File
- parameter
in cluster manager configuration, Cluster Manager Parameters
|
Printable version
