Preface

This guide describes how to use the Event Monitoring Service (EMS) and how to configure Management Information Base (MIB) monitors. The MIB monitors check and report status on cluster, network, and system resources.

EMS functions at various levels:

independently
with high availability software such as ServiceGuard
with enterprise management products such as IT/O

The contents of this guide are as follows:

Related Publications

The following documents contain additional related information:

Using High Availability Monitors (HP Part Number B5736-90025)
EMS Hardware Monitors User's Guide (HP Part Number B6191-90018)
Managing MC/ServiceGuard (HP Part Number B3936-90026)
Configuring OPS Clusters with ServiceGuard OPS Edition (HP Part Number 5158-90026)
Managing Systems and Workgroups (HP Part Number B2355-90664)
Peter Weygant, Clusters for High Availability: A Primer of HP-UX Solutions (ISBN 0-13-494758-4). HP Press: Prentice Hall, Inc., 1996
Tom Madell, Disk and File Management Tasks on HP-UX (ISBN 0-13-518861-X). HP Press; Prentice Hall, Inc., 1997
HP OpenView IT/Operations Admnistrator's Reference (HP Part Number B6941-90001)
Managing Highly Available NFS (HP Part Number B5125-90001)
http://docs.hp.com Web site for information about Hewlett-Packard's high-availability technologies where you can find documents.Select HP-UX then High Availability.
www.software.hp.com Web site for designing and building an EMS monitor. Select High Availability then Event Monitoring Service Developer's Kit.

Problem Reporting

If you have any problems with the software or documentation, please contact your local Hewlett-Packard Sales Office or Customer Service Center.

Preface

Technical documentation

» Table of Contents

» Glossary

» Index

Related Publications

Problem Reporting