HP-UX 11i Version 1.5 Reference Volume 4, Section 3: Libraries

Table of Contents

I Section 3: Libraries

Introduction

intro(3) - introduction to subroutines and libraries

a

a64l(3C) - convert between long integer and base-64 ASCII string

abort(3C) - generate a software abort fault

abs(3C) - return integer absolute value

aclsort(3C) - sort an Access Control List (JFS File Systems only)

acltostr(3C) - convert access control list (ACL) structure to string form (HFS File Systems only)

acos(3M) - arccosine functions

acosd(3M) - degree-valued arccosine functions

acosh(3M) - arc hyperbolic cosine functions

add_wch(3X) - add a complex character and rendition to a window

add_wchnstr(3X) - add an array of complex characters and renditions to a window

addch(3X) - add a single-byte character and rendition to a window and advance the cursor

addchnstr(3X) - add length limited string of single-byte characters and renditions to a window

addchstr(3X) - add string of single-byte characters and renditions to a window

addnstr(3X) - add a string of multi-byte characters without rendition to a window and advance cursor

addnwstr(3X) - add a wide-character string to a window and advance the cursor

addsev(3C) - define additional severities for formatting routines

annuity(3M) - present value factor for annuity

asin(3M) - arcsine functions

asind(3M) - degree-valued arcsine functions

asinh(3M) - arc hyperbolic sine functions

assert(3X) - verify program assertion

atan(3M) - arctangent functions

atan2(3M) - arctangent and quadrant functions

atan2d(3M) - degree-valued arctangent-and-quadrant functions

atand(3M) - degree-valued arctangent functions

atanh(3M) - arc hyperbolic tangent functions

atexit(3) - register a function to be called at program termination

attr_get(3X) - window attribute control functions

attroff(3X) - restricted window attribute control functions

b

basename(3C) - extract components of a path name

baudrate(3X) - get terminal baud rate

beep(3X) - audible signal

bgets(3G) - read stream up to next delimiter

bigcrypt(3C) - generate hashing encryption on large strings

bindresvport(3N) - bind socket to privileged IP port

bkgd(3X) - set or get background character and rendition using a single-byte character

bkgrnd(3X) - set or get background character and rendition using a complex character

blmode(3C) - terminal block-mode library interface

border(3X) - draw borders from single-byte characters and renditions

border_set(3X) - draw borders from complex characters and renditions

box(3X) - draw borders from single-byte characters and renditions

box_set(3X) - draw borders from complex characters and renditions

bsd_signal(3C) - simplified signal facilities

bsdproc(3C) - 4.2 BSD-compatible process control facilities

bsearch(3C) - binary search a sorted table

btowc(3C) - conversion between single-byte and wide-character

bufsplit(3G) - split buffer into fields

byteorder(3N) - convert values between host and network byte order

c

cabs(3M) - complex absolute value (also called norm, modulus, or magnitude) functions

cacos(3M) - complex arccosine functions

cacosh(3M) - complex arc hyperbolic cosine functions

can_change_color(3X) - color manipulation functions

carg(3M) - complex argument (also called phase angle) functions

casin(3M) - complex arcsine functions

casinh(3M) - complex arc hyperbolic sine functions

catan(3M) - complex arctangent functions

catanh(3M) - complex arc hyperbolic tangent functions

catgets(3C) - get a program message

catopen(3C) - open and close a message catalog for reading

cbreak(3X) - input mode control functions

cbrt(3M) - cube root functions

ccos(3M) - complex cosine functions

ccosh(3M) - complex hyperbolic cosine functions

ceil(3M) - ceiling functions

cexp(3M) - complex exponential functions

cfspeed(3C) - tty baud rate functions

chgat(3X) - change renditions of characters in a window

chownacl(3C) - change owner and/or group represented in a file's access control list (ACL) (HFS File Systems only)

cimag(3M) - the imaginary part of a complex value

clear(3X) - clear a window

clearenv(3C) - clear the process environment

clearok(3X) - terminal output control functions

clock(3C) - report CPU time used

clog(3M) - complex natural (base-e) logarithm functions

clrtobot(3X) - clear from cursor to end of window

clrtoeol(3X) - clear from cursor to end of line

COLS(3X) - number of columns on terminal screen

compound(3M) - compound interest factor

confstr(3C) - get string-valued configuration values

conj(3M) - complex conjugate functions

conv(3C) - translate characters

copylist(3G) - copy a file into memory

copysign(3M) - copysign functions

copywin(3X) - copy a region of a window

cos(3M) - cosine functions

cosd(3M) - degree-valued cosine functions

cosh(3M) - hyperbolic cosine functions

cpacl(3C) - copy the access control list (ACL) and mode bits from one file to another (HFS and JFS File Systems only)

cpow(3M) - complex power functions

cproj(3M) - functions that project onto the Riemann sphere

cr_close(3) - close a crash dump descriptor

cr_info(3) - retrieve crash dump information

cr_isaddr(3) - validate whether physical page number was dumped

cr_open(3) - open crash dump for reading

cr_perror(3) - print a libcrash error or warning message

cr_read(3) - read from crash dump

cr_set_node(3) - set node number

cr_uncompress(3) - uncompress a file in a crash dump

cr_verify(3) - verify integrity of crash dump

creal(3M) - the real part of a complex value

crt0(3) - execution startup routines

crypt(3C) - generate hashing encryption

csin(3M) - complex sine functions

csinh(3M) - complex hyperbolic sine functions

csqrt(3M) - complex square root functions

ctan(3M) - complex tangent functions

ctanh(3M) - complex hyperbolic tangent functions

ctermid(3S) - generate file name for terminal

ctime(3C) - convert date and time to string

ctype(3C) - classify characters

cur_term(3X) - current terminal information

curs_set(3X) - set the cursor mode

curscr(3X) - current window

curses_intro(3X) - Terminal and printer handling and optimization package

cuserid(3S) - get character login name of the user

d

datalock(3C) - lock process into memory after allocating data and stack space

dbm(3C) - database subroutines

def_prog_mode(3X) - save or restore program or shell terminal modes

del_curterm(3X) - interfaces to the

delay_output(3X) - delay output

delch(3X) - delete a character from a window.

deleteln(3X) - delete lines in a window

delscreen(3X) - free storage associated with a screen

delwin(3X) - delete a window

derwin(3X) - relative window creation function

devnm(3) - map device ID to file path

dial(3C) - establish an outgoing terminal line connection

directory(3C) - directory operations

div(3C) - integer division and remainder

dlclose(3C) - close a shared library

dlerror(3C) - get diagnostic information

dlget(3C) - retrieve information about a loaded module (program or shared library)

dlgetname(3C) - retrieve the name of a load module given a load module descriptor

dlmodinfo(3C) - retrieve information about a loaded module (program or shared library)

dlopen(3C) - open a shared library

dlsym(3C) - get the address of a symbol in shared library

doupdate(3X) - refresh windows and lines

drand48(3C) - generate uniformly distributed pseudo-random numbers

dupwin(3X) - duplicate a window

e

echo(3X) - enable/disable terminal echo

echo_wchar(3X) - write a complex character and immediately refresh the window

echochar(3X) - echo single-byte character and rendition to a window and refresh

ecvt(3C) - convert floating-point number to string

elf(3E) - object file access library

elf_begin(3E) - make a file descriptor

elf_cntl(3E) - control a file descriptor

elf_end(3E) - finish using an object file

elf_error(3E) - error handling

elf_fill(3E) - set fill byte

elf_flag(3E) - manipulate flags

elf_fsize(3E) - return the size of an object file type for elf32 files, return the size of an object file type for elf64 files, respectively.

elf_getarhdr(3E) - retrieve archive member header

elf_getarsym(3E) - retrieve archive symbol table

elf_getbase(3E) - get the base offset for an object file

elf_getdata(3E) - get section data

elf_getehdr(3E) - retrieve class-dependent object file header for elf32 and elf64 files, respectively

elf_getident(3E) - retrieve file identification data

elf_getphdr(3E) - retrieve class-dependent program header table for elf32 and elf64 files, respectively

elf_getscn(3E) - get section information

elf_getshdr(3E) - retrieve class-dependent section header for elf32 and elf64 files, respectively

elf_hash(3E) - compute hash value

elf_kind(3E) - determine file type

elf_next(3E) - sequential archive member access

elf_rand(3E) - random archive member access

elf_rawfile(3E) - retrieve uninterpreted file contents

elf_strptr(3E) - make a string pointer

elf_update(3E) - update an ELF descriptor

elf_version(3E) - coordinate ELF library and application versions

elf_xlate(3E) - class-dependent data translation for elf32 and elf64 files, respectively

end(3C) - last locations in program

endwin(3X) - suspend Curses session

erasechar(3X) - single-byte terminal environment query functions

erasewchar(3X) - terminal environment query functions

erf(3M) - error function and complementary error functions

exp(3M) - exponential functions

exp10(3M) - base-10 exponential functions

exp2(3M) - base-2 exponential functions

expm1(3M) - exponential minus 1 functions

exportent(3N) - access exported file system information

f

fabs(3M) - absolute value functions

fattach(3C) - attach a STREAMS file descriptor to an object in the file system name space

fclose(3S) - close or flush a stream

fdetach(3C) - detach a name from a STREAMS file descriptor

fdim(3M) - positive difference functions

feclearexcept(3M) - clear floating-point exception flags

fegetenv(3M) - get floating-point environment

fegetexceptflag(3M) - get floating-point exception flags

fegetflushtozero(3M) - get floating-point underflow mode

fegetround(3M) - get floating-point rounding direction mode

fegettrapenable(3M) - get floating-point exception trap enables

feholdexcept(3M) - save floating-point environment

feraiseexcept(3M) - raise floating-point exceptions

ferror(3S) - stream status inquiries

fesetenv(3M) - set floating-point environment

fesetexceptflag(3M) - set floating-point exception flags

fesetflushtozero(3M) - set floating-point underflow mode

fesetround(3M) - set floating-point rounding direction mode

fesettrapenable(3M) - set exception trap enables

fetestexcept(3M) - test floating-point exceptions

feupdateenv(3M) - update floating-point environment

fgetpos(3S) - save and restore a file position indicator for a stream

fgetpos64(3S) - non-POSIX standard API interfaces to support large files.

fgetws(3C) - get a wide character string from a stream file

fileno(3S) - map stream pointer to file descriptor

filter(3X) - disable use of certain terminal capabilities

flash(3X) - flash the screen

flockfile(3S) - explicit locking of streams within a multithread application

floor(3M) - floor functions

flushinp(3X) - discard input

fma(3M) - floating multiply-add functions

fmax(3M) - maximum value functions

fmin(3M) - minimum value functions

fmod(3M) - remainder functions

fmtmsg(3C) - displays formatted message on standard error and console

fnmatch(3C) - match filename patterns

fopen(3S) - open or re-open a stream file; convert file to stream

fpclassify(3M) - floating-point value classification macro

fread(3S) - buffered binary input/output to a stream file

frexp(3M) - extract mantissa and exponent from floating-point number

fseek(3S) - reposition a file pointer in a stream

ftok(3C) - create interprocess communication identifier

ftw(3C) - walk a file tree executing a function

fwide(3C) - set stream orientation

fwprintf(3C) - print formatted wide-character output

fwscanf(3C) - convert formatted wide-character input

g

get_expiration_time(3T) - add a specific time interval to the current absolute system time

get_wch(3X) - get a wide character from a terminal

getbegyx(3X) - get additional cursor and window coordinates

getbootpent(3X) - get or put bootptab entry

getc(3S) - get character or word from a stream file

getcchar(3X) - get a wide character string and rendition from a

getch(3X) - get a single-byte character from the terminal

getclock(3C) - get current value of system-wide clock

getcwd(3C) - get pathname of current working directory

getdate(3C) - convert user format date and time

getdiskbyname(3C) - get disk description by its name

getdvagent(3) - manipulate device assignment database entry for a trusted system

getenv(3C) - return value for environment name

getfsent(3X) - get file system descriptor file entry

getgrent(3C) - get group file entry

gethostent(3N) - get network host entry

getlogin(3C) - get name of user logged in on this terminal

getmntent(3X) - get file system descriptor file entry

getn_wstr(3X) - get an array of wide characters and function key codes from a terminal

getnetconfig(3N) - get network configuration database entry

getnetent(3N) - get network entry

getnetgrent(3C) - get network group entry

getnetpath(3N) - get /etc/netconfig entry corresponding to NETPATH component

getnstr(3X) - get a multi-byte character length limited string from the terminal

getopt(3C) - get option letter from argument vector

getpass(3C) - read a password

getprdfent(3) - manipulate system default database entry for a trusted system

getprotoent(3N) - get protocol entry

getprpwent(3) - manipulate protected password database entries (for trusted systems only).

getprtcent(3) - manipulate terminal control database entry for a trusted system

getpublickey(3N) - retrieve public or secret key

getpw(3C) - get name from UID

getpwent(3C) - get password file entry

getresuid(3) - get real, effective and saved user or group IDs

getrpcent(3C) - get rpc entry

getrpcport(3N) - get RPC port number

gets(3S) - get a string from a stream

getservent(3N) - get service entry

getspent(3C) - access secure password entries, for trusted systems only.

getspwent(3X) - get secure password file entry on trusted systems

getstr(3X) - get a multi-byte character string from the terminal

getsubopt(3C) - parse suboptions from a string.

gettimer(3C) - get value of a per-process timer

gettxt(3C) - read text string from message file

getusershell(3C) - get legal user shells

getut(3C) - access utmp file entry

getutx(3C) - access utmpx file entry

getwc(3C) - get a wide character from a stream file

getwd(3C) - get pathname of current working directory

getwin(3X) - dump window to, and reload window from, a file

getyx(3X) - get cursor and window coordinates

glob(3C) - file name generation function

grantpt(3C) - grant access to the STREAMS slave pty

gss_accept_sec_context(3) - establish a security context between the application and a context acceptor

gss_acquire_cred(3) - allow an application to acquire a handle for an existing, named credential

gss_add_cred(3) - adds a credential-element to a credential

gss_add_oid_set_member(3) - add an Object Identifier (OID) to an OID set

gss_canonicalize_name(3) - convert an internal name to an internal mechanism name (MN) representation of an opaque internal name

gss_compare_name(3) - allow an application to compare two internal names to determine whether they are equivalent

gss_context_time(3) - check the number of seconds the context will remain valid

gss_create_empty_oid_set(3) - create a new, empty OID set, to which members can be added

gss_delete_sec_context(3) - delete a security context

gss_display_name(3) - provide textual representation of an opaque internal name to an application

gss_display_status(3) - provide an application with the textual representation of a GSSAPI status code that can be displayed to a user or used for logging

gss_duplicate_name(3) - allow an application to create an exact duplicate of the existing internal name

gss_export_name(3) - convert a mechanism name (MN) to a form suitable for direct comparison

gss_export_sec_context(3) - transfer a security context to another process on a single machine

gss_get_mic(3) - calculate a cryptographic message integrity code (MIC) for a message and return in a token

gss_import_name(3) - convert a printable name to an internal form

gss_import_sec_context(3) - transfer a security context to another process on a single machine

gss_indicate_mechs(3) - allow an application to determine which underlying security mechanisms are available

gss_init_sec_context(3) - establish a security context between the context initiator and a context acceptor

gss_inquire_context(3) - obtain information about a security context

gss_inquire_cred(3) - provide the calling application information about a credential

gss_inquire_cred_by_mech(3) - provide the calling application per-mechanism information about a credential

gss_inquire_mechs_for_name(3) - list the mechanisms that support the specified name-type

gss_inquire_names_for_mech(3) - list the name-types supported by the specified mechanism

gss_process_context_token(3) - process a context to the security service

gss_release_buffer(3) - free storage associated with a buffer

gss_release_cred(3) - mark a credential for deletion

gss_release_name(3) - free storage associated with an internal name allocated by a GSSAPI routine

gss_release_oid_set(3) - free storage associated with a gss_OID_set object

gss_test_oid_set_member(3) - check an OID set for a specified OID

gss_unwrap(3) - verify a message with attached message integrity code (MIC) and decrypt message content if necessary

gss_verify_mic(3) - check a cryptographic message integrity code (MIC) against a message to verify its integrity

gss_wrap(3) - attach a message integrity code (MIC) to a message, and optionally encrypt the message content

gss_wrap_size_limit(3) - determine a token-size limit for gss_wrap on a context

h

halfdelay(3X) - control input character delay mode

has_ic(3X) - query functions for terminal insert and delete capability

hline(3X) - draw lines from single-byte characters and renditions

hline_set(3X) - draw lines from complex characters and renditions

hppac(3X) - 3000-mode packed-decimal library

hsearch(3C) - manage hash search tables

hypot(3M) - Euclidean distance functions

i

iconv(3C) - codeset conversion routines

idcok(3X) - enable or disable use of hardware insert- and delete-character features

ilogb(3M) - radix-independent exponent functions

immedok(3X) - enable or disable immediate terminal refresh

in_wch(3X) - input a complex character and rendition from a window

in_wchnstr(3X) - input an array of complex characters and renditions from a window

inch(3X) - input a single-byte character and rendition from a window

inchnstr(3X) - input an array of single-byte characters and renditions from a window

inet(3N) - Internet address manipulation routines

inet6(3N) - Internet address manipulation routines for IP Version 4 and later

initgroups(3C) - initialize group access list

initscr(3X) - screen initialisation functions

innstr(3X) - input a multi-byte character string from a window

innwstr(3X) - input a string of wide characters from a window

ins_nwstr(3X) - insert a wide-character string into a window

ins_wch(3X) - insert a complex character and rendition into a window

insch(3X) - insert a single-byte character and rendition into a window

insdelln(3X) - delete or insert lines into a window

insertln(3X) - insert lines into a window

insnstr(3X) - insert a multi-byte character string into a window

insque(3C) - insert or remove an element in a queue

intrflush(3X) - enable or disable flush on interrupt

is_linetouched(3X) - window refresh control functions

isastream(3C) - determine if a file descriptor refers to a STREAMS device or STREAMS-based pipe

isendwin(3X) - determine whether a screen has been refreshed

isfinite(3M) - floating-point finiteness macro

isgreater(3M) - floating-point quiet comparison macro (>)

isgreaterequal(3M) - floating-point quiet comparison macro (>=)

isinf(3M) - floating-point test for infinity

isless(3M) - floating-point quiet comparison macro (<)

islessequal(3M) - floating-point quiet comparison macro (<=)

islessgreater(3M) - floating-point quiet comparison macro (<>)

isnan(3M) - floating-point test for NaN

isnormal(3M) - floating-point test for normalized value

isunordered(3M) - floating-point comparison macro (unordered)

j

j0(3M) - Bessel functions of the first kind

k

keyname(3X) - get name of key

keypad(3X) - enable/disable abbreviation of function keys

l

l3tol(3C) - convert between 3-byte integers and long integers

lckpwdf(3C) - control access to /etc/passwd file

ldcvt(3C) - convert long-double floating-point number to string

ldexp(3M) - scale exponent of a floating-point number

lgamma(3M) - log gamma functions

libkrb5(3) - Kerberos client libraries (libkrb5, libk5crypto, libcom_err)

LINES(3X) - number of lines on terminal screen

llrint(3M) - round to nearest long long functions

llround(3M) - round to long long functions

localeconv(3C) - query the numeric formatting conventions of the current locale

log(3M) - natural logarithm functions

log10(3M) - common logarithm functions

log1p(3M) - natural logarithm of one-plus-argument functions

log2(3M) - logarithm base two functions

logb(3M) - radix-independent exponent functions

logname(3C) - return login name of user

longname(3X) - get verbose description of current terminal

lrint(3M) - round to nearest long int functions

lround(3M) - round to long int functions

lsearch(3C) - linear search and update

ltostr(3C) - convert long integers to strings

m

malloc(3C) - main memory allocator

mbrlen(3C) - get number of bytes in a character (restartable)

mbrtowc(3C) - convert a character to a wide-character code (restartable)

mbsinit(3C) - determine conversion object status

mbsrtowcs(3C) - convert a character string to a wide-character string (restartable)

memalign(3C) - allocate aligned memory

memory(3C) - memory operations

meta(3X) - enable/disable meta-keys

mkdirp(3G) - create, remove directories in a path

mkfifo(3C) - make a FIFO file

mktemp(3C) - make a unique file name

mktimer(3C) - allocate a per-process timer

modf(3M) - decompose floating-point number

monitor(3C) - prepare execution profile

mount(3N) - keep track of remotely mounted file systems

move(3X) - window cursor location functions

multibyte(3C) - multibyte characters and strings conversions

mvcur(3X) - output cursor movement commands to the terminal

mvderwin(3X) - define window coordinate transformation

mvprintw(3X) - print formatted output in window

mvscanw(3X) - convert formatted input from a window

mvwin(3X) - move window

n

nan(3M) - string-to-NaN conversion functions

napms(3X) - suspend the calling process

ndbm(3X) - database subroutines

net_aton(3C) - network station address string conversion routines

netdir(3N) - generic transport name-to-address translation

newpad(3X) - pad management functions

newwin(3X) - window creation functions

nextafter(3M) - next representable floating-point values

nis_db(3N) - NIS+ Database access functions

nis_error(3N) - display NIS+ error messages

nis_groups(3N) - NIS+ group manipulation functions

nis_local_names(3N) - NIS+ local names

nis_names(3N) - NIS+ namespace functions

nis_objects(3N) - NIS+ object formats

nis_ping(3N) - misc NIS+ log administration functions

nis_server(3N) - miscellaneous NIS+ functions

nis_subr(3N) - NIS+ subroutines

nis_tables(3N) - NIS+ table functions

nl(3X) - enable/disable newline translation

nl_langinfo(3C) - language information

nl_tools_16(3X) - tools to process 16-bit characters (OBSOLETED AT 10.30)

nlist(3E) - get entries from name list

nodelay(3X) - enable or disable block during read

noqiflush(3X) - enable/disable queue flushing

notimeout(3X) - control blocking on input

o

overlay(3X) - copy overlapped windows

p

pam(3) - Pluggable Authentication Module

pam_acct_mgmt(3) - perform PAM account validation procedures

pam_authenticate(3) - perform authentication within the PAM framework

pam_chauthtok(3) - perform password related functions within the PAM framework

pam_get_user(3) - PAM routine to retrieve user name.

pam_open_session(3) - perform PAM session creation and termination operations

pam_set_data(3) - PAM routines to maintain module specific state

pam_set_item(3) - authentication information routines for PAM

pam_setcred(3) - modify/delete user credentials for an authentication service

pam_sm(3) - PAM Service Module APIs

pam_sm_acct_mgmt(3) - Service provider implementation for pam_acct_mgmt

pam_sm_authenticate(3) - Service provider implementation for pam_authenticate

pam_sm_chauthtok(3) - Service provider implementation for pam_chauthtok

pam_sm_open_session(3) - Service provider implementation for pam_open_session and pam_close_session respectively

pam_sm_setcred(3) - Service provider implementation for pam_setcred

pam_start(3) - authentication transaction routines for PAM

pam_strerror(3) - get PAM error message string

pathfind(3G) - search for named file in named directories

pechochar(3X) - write a character and rendition and immediately refresh the pad

perror(3C) - system error messages

pfmt(3C) - display message in standard format

popen(3S) - initiate pipe I/O to/from a process

pow(3M) - power functions

prcmd(3N) - return streams to parallel remote commands

printf(3S) - print formatted output

pthread(3T) - Introduction To POSIX.1c Threads

pthread_atfork(3T) - register fork handlers.

pthread_attr(3T) - set and get thread attributes

pthread_attr_init(3T) - initialize or destroy a thread attributes object.

pthread_cancel(3T) - cancel execution of a thread

pthread_cleanup_push(3T) - register or remove a cancellation cleanup handler

pthread_cond_init(3T) - initialize or destroy a condition variable.

pthread_cond_signal(3T) - unblock one or all threads waiting on a condition variable.

pthread_cond_wait(3T) - wait or timed wait on a condition variable.

pthread_condattr_getpshared(3T) - set or get the process-shared attribute

pthread_condattr_init(3T) - initialize or destroy a condition variable attributes object.

pthread_create(3T) - create a new thread of execution.

pthread_default_stacksize_np(3T) - change the default stacksize.

pthread_detach(3T) - mark a thread as detached to reclaim its resources when it terminates.

pthread_equal(3T) - compare two thread identifiers.

pthread_exit(3T) - cause the calling thread to terminate.

pthread_getconcurrency(3T) - set or get the concurrency level of unbound threads

pthread_getschedparam(3T) - set or get the scheduling policy and associated parameters

pthread_getspecific(3T) - get or set the thread-specific data associated with a key

pthread_join(3T) - wait for the termination of a specified thread.

pthread_key_create(3T) - create or delete a thread-specific data key.

pthread_kill(3T) - send a signal to a thread.

pthread_launch_policy_np(3T) - setting thread launch policies

pthread_mutex_getprioceiling(3T) - set or get the prioceiling of a mutex.

pthread_mutex_init(3T) - initialize or destroy a mutex.

pthread_mutex_lock(3T) - lock or attempt to lock a mutex.

pthread_mutex_unlock(3T) - unlock a mutex.

pthread_mutexattr_getprotocol(3T) - get and set the prioceiling and protocol attributes

pthread_mutexattr_getpshared(3T) - get and set the process-shared attribute and type attribute

pthread_mutexattr_getspin_np(3T) - get and set the mutex spin and yield frequency attributes

pthread_mutexattr_init(3T) - initialize or destroy a mutex attributes object.

pthread_once(3T) - call an initialization routine only once.

pthread_processor_bind_np(3T) - determine how many processors are installed in the system, bind threads to processors, and determine processor IDs; determine how many locality domains are installed in the system, bind threads to locality domains, and determine locality domain IDs; respectively.

pthread_resume_np(3T) - continue execution of a thread, resume execution of a thread, and suspend execution of a thread; respectively.

pthread_rwlock_init(3T) - initialize or destroy a read-write lock.

pthread_rwlock_rdlock(3T) - lock or attempt to lock a read-write lock for reading.

pthread_rwlock_unlock(3T) - unlock a read-write lock.

pthread_rwlock_wrlock(3T) - lock or attempt to lock a read-write lock for writing.

pthread_rwlockattr_getpshared(3T) - get or set the process-shared attribute

pthread_rwlockattr_init(3T) - initialize or destroy a read-write lock attributes object.

pthread_self(3T) - obtain the thread ID for the calling thread.

pthread_setcancelstate(3T) - set and retrieve the current thread's cancelability state or type.

pthread_sigmask(3T) - examine/change the signal mask of the calling thread.

pthread_testcancel(3T) - process any pending cancellation requests.

ptsname(3C) - get the pathname of a slave pty (pseudo-terminal)

putc(3S) - put character or word on a stream

putenv(3C) - change or add value to environment

putp(3X) - output commands to the terminal

putpwent(3C) - write password file entry

puts(3S) - put a string on a stream

putwc(3C) - put a wide character on a stream file

putws(3C) - put a wide character string on a stream file

q

qsort(3C) - quicksort

r

rand(3C) - simple random-number generator

random(3M) - generate a pseudorandom number

rcmd(3N) - return a stream to a remote command

re_comp(3X) - compile and execute regular expressions

realpath(3X) - resolve pathname

redrawwin(3X) - line update status functions

regcmp(3X) - compile and execute regular expression

regcomp(3C) - regular expression matching routines

regexp(3X) - regular expression compile and match routines

reltimer(3C) - relatively arm a per-process timer

remainder(3M) - remainder functions

remove(3C) - remove a file

remquo(3M) - remainder function with quotients

resetty(3X) - save/restore terminal mode

resolver(3N) - resolver routines

rexec(3N) - return stream to a remote command

rint(3M) - round to nearest integer functions

ripoffline(3X) - reserve a line for a dedicated purpose

rmtimer(3C) - free a per-process timer

rnusers(3N) - return information about users on remote machines

round(3M) - round functions

rpc(3N) - library routines for remote procedure calls

rpc_clnt_auth(3N) - library routines for client side remote procedure call authentication

rpc_clnt_calls(3N) - library routines for client side calls

rpc_clnt_create(3N) - library routines for dealing with creation and manipulation of CLIENT handles

rpc_control(3N) - library routine for manipulating global RPC attributes for client and server applications

rpc_soc(3N) - obsolete library routines for RPC

rpc_svc_calls(3N) - library routines for RPC servers

rpc_svc_create(3N) - library routines for the creation of server handles

rpc_svc_err(3N) - library routines for server side remote procedure call errors

rpc_svc_reg(3N) - library routines for registering servers

rpc_xdr(3N) - XDR library routines for remote procedure calls

rpcbind(3N) - library routines for RPC bind service

rstat(3N) - get performance data from remote kernel

rwall(3N) - write to specified remote machines

s

scalb(3M) - scale exponent of a radix-independent floating-point number

scalbln(3M) - scale exponent of a radix-independent floating-point number

scalbn(3M) - scale exponent of a radix-independent floating-point number

scandir(3C) - scan a directory

scanf(3S) - formatted input conversion, read from stream file

scr_dump(3X) - screen file input/output functions

scrl(3X) - enhanced scroll a Curses window functions

scroll(3X) - scroll a Curses window

secure_rpc(3N) - library routines for secure remote procedure calls

set_term(3X) - switch between screens

setaclentry(3C) - add, modify, or delete one entry in file's access control list (ACL) (HFS File Systems only)

setbuf(3S) - assign buffering to a stream file

setcat(3C) - set the default message catalog

setcchar(3X) - set

setclock(3C) - set value of system-wide clock

setjmp(3C) - non-local goto

setlabel(3C) - define label for formatting routines

setlocale(3C) - set and get the locale of a program

shl_load(3X) - explicit load of shared libraries

signbit(3M) - floating-point sign-determination

sigpause(3C) - atomically release blocked signals and wait for interrupt

sigset(3C) - signal management

sigsetops(3C) - initialize, manipulate, and test signal sets

sin(3M) - sine functions

sind(3M) - degree-valued sine functions

sinh(3M) - hyperbolic sine functions

sleep(3C) - suspend execution for interval

slk_attroff(3X) - soft label functions

smonitor(3C) - prepare execution profile

spray(3N) - scatter data in order to check the network

sqrt(3M) - square root functions

ssignal(3C) - software signals

standend(3X) - set and clear window attributes

statfsdev(3C) - get file system statistics

statvfsdev(3C) - get file system information

stdio(3S) - standard buffered input/output stream file package

stdscr(3X) - default window

strfmon(3C) - convert monetary value to string

strftime(3C) - convert date and time to string

string(3C) - character string operations

strord(3C) - convert string data order

strptime(3C) - date and time conversion

strtoacl(3C) - convert string form to access control list (ACL) structure (HFS File System only)

strtod(3C) - convert string to floating-point number

strtol(3C) - convert string to integer

subpad(3X) - enhanced pad management function

swab(3C) - swap bytes

syncok(3X) - synchronise a window with its parents or children

syslog(3C) - control system log

system(3S) - issue a shell command

t

t_accept(3) - accept a connect request

t_alloc(3) - allocate a library structure

t_bind(3) - bind an address to a transport endpoint

t_close(3) - close a transport endpoint

t_connect(3) - establish a connection with another transport user

t_error(3) - produce error message

t_free(3) - free a library structure

t_getinfo(3) - get protocol-specific service information

t_getprotaddr(3) - get the protocol address

t_getstate(3) - get the current state

t_listen(3) - listen for a connect request

t_look(3) - look at the current event on a transport endpoint

t_open(3) - establish a transport endpoint

t_optmgmt(3) - manage options for a transport endpoint

t_rcv(3) - receive data or expedited data sent over a connection

t_rcvconnect(3) - receive the confirmation from a connect request

t_rcvdis(3) - retrieve information from disconnect

t_rcvrel(3) - acknowledge receipt of an orderly release indication at a transport endpoint

t_rcvudata(3) - receive a data unit from remote transport provider user

t_rcvuderr(3) - receive a unit data error indication

t_snd(3) - send data or expedited data over a connection

t_snddis(3) - send user-initiated disconnect request

t_sndrel(3) - initiate an orderly release

t_sndudata(3) - send a data unit

t_strerror(3) - produce an error message string

t_sync(3) - synchronize transport library

t_unbind(3) - disable a transport endpoint

tan(3M) - tangent functions

tand(3M) - degree-valued cosine functions

tanh(3M) - hyperbolic tangent functions

tcattribute(3C) - control tty device

tccontrol(3C) - tty line control functions

tcgetpgrp(3C) - get foreground process group id

tcgetsid(3C) - get terminal session ID

tcsetpgrp(3C) - set foreground process group id

termattrs(3X) - get supported terminal video attributes

termcap(3X) - emulate /usr/share/lib/termcap access routines

termname(3X) - get terminal name

tgamma(3M) - true gamma functions

tgetent(3X) - termcap

tigetflag(3X) - retrieve capabilities from the

tmpfile(3S) - create a temporary file

tmpnam(3S) - create a name for a temporary file

touchwin(3X) - window refresh control function

towctrans(3C) - character transliteration

trunc(3M) - truncation functions

tsearch(3C) - manage binary search trees

ttyname(3C) - find name of a terminal

ttyslot(3C) - find the slot in the utmp file of the current user

typeahead(3X) - control checking for typeahead

u

uc_access(3) - ucontext_t (user context) access

unctrl(3X) - generate printable representation of a character

ungetc(3S) - push character back into input stream

ungetch(3X) - push a character onto the input queue

ungetwc(3C) - push a wide character back into an input stream

unlockpt(3C) - unlock a STREAMS pty master and slave pair

_UNW_createContextForSelf(3X) - allocate and deallocate unwind library data structure

_UNW_currentContext(3X) - manipulate values in unwind library data structure

_UNW_getGR(3X) - query values in unwind library data structure

use_env(3X) - specify source of screen size information

U_STACK_TRACE(3X) - produce a trace back of the procedure call stack using the unwind library

v

vidattr(3X) - output attributes to the terminal

vprintf(3S) - print formatted output of a varargs argument list

vscanf(3S) - formatted input conversion to a varargs argument list, read from stream file

vw_printw(3X) - print formatted output in window (

vw_scanw(3X) - convert formatted input from a window (

vwprintf(3C) - wide-character formatted output of a stdarg argument list

vwprintw(3X) - print formatted output in window

vwscanw(3X) - convert formatted input from a window

w

wconv(3C) - translate wide characters

wcrtomb(3C) - convert a wide-character code to a character (restartable)

wcsftime(3C) - convert date and time to wide-character string

wcsrtombs(3C) - convert a wide-character string to a character string (restartable)

wcstod(3C) - convert wide character string to double-precision number

wcstol(3C) - convert wide character string to long integer

wcstring(3C) - wide character string operations

wctype(3C) - classify wide characters

wmemory(3C) - memory operations based on wide-character

wordexp(3C) - perform word expansions

wunctrl(3X) - generate printable representation of a wide character

x

xdr(3N) - library routines for external data representation

xdr_admin(3N) - library routines for external data representation

xdr_complex(3N) - library routines for external data representation

xdr_create(3N) - library routines for external data representation stream creation

xdr_simple(3N) - library routines for external data representation

y

y0(3M) - Bessel functions of the second kind

ypclnt(3C) - Network Information Service client interface

yppasswd(3N) - update user password in Network Information Service

ypupdate(3C) - changes NIS information

II Section 9: Glossary

Introduction

intro(9) - introduction to glossary section

Glossary

glossary(9) - a description of common HP-UX terms

kerberos(9) - Introduction to the Kerberos system

Index