Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
 Read Before Installing HP-UX 11i Version 1.5: Release B.11.20for rx9610 and rx4610 HP Serversand i2000 HP Workstations > Chapter 2 Late-Breaking News

Issues Affecting the Cold-Install of HP-UX 11i Version 1.5 (B.11.20)
» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Index

spacerspacerspacer
spacer
spacer
  		 
 

Browser Required for Help System

The Online Diagnostics help system requires the use of a web browser. Therefore, in order to use the help system, you need to load the web browser included in Media Kit.

  • Netscape can be found on the HP-UX 11i Version 1.5 (B.11.20) Application DVD.

  • Make sure to install it so that you can use the Online Diagnostics help system.

Serial Console Re-Direction is Not Supported

The ability to re-direct console activity to a serially connected terminal is unsupported.

Cold-Install Disk Must be in HBA Table

When you cold-install an rx9610, rx4610, or i2000 system, you must be certain that:

  • The disk to be installed on resides under one of the four Host Bus Adapters (HBA) that are selected in the LSI option ROM table.

  • The HBA where the boot disks reside is the first HBA listed in the bootable HBA table.

If either of the above is not true, you will find that boot fails and the boot disk is not listed in the EFI table as a bootable disk. You can correct this situation with the LSI configuration menu.

To view or change the LSI option ROM table and the HBA information, enter the LSI configuration menu early in the system boot sequence by pressing Ctrl-C when prompted.



Introduction
  		 


Other Issues  
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2001 Hewlett-Packard Development Company, L.P.