|
|
United States-English | |
|
|
 |
|
HP-UX 11i Version 1.5 Release Notes: release id B.11.20 for rx9610 and rx4610 hp servers and i2000 hp workstations > Chapter 5 Networking
Network Drivers |
|
|
intl100 is a new PCI 10/100 Mbps full duplex ethernet driver based on the 82559 chipset. It allows the cpu and the interface card to work in parallel on the memory buffer descriptors and batches transmit commands if the incoming rate is more than the service rate. As a result, this driver offers:
intl100 supports cards with an RJ45 connector, 100Base-TX card A6792A, and is similar to, btlan. Because the architecture of the 82559 chipset is different from the 21143 chipset, the hardware dependent routines are different. The intl100 driver comes pre-installed for all applicable PCI 100Base-T cards. A workaround is required to enable network tracing and logging for the Gigabit Ethernet Driver. After the OS has come up, run the following three commands in order to enable nettl tracing and logging for the Gigabit Ethernet Driver:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Printable version |
|
|
|
|
|
|||||||||||||||
|
|||||||||||||||
