| Node Configuration: See
“Node Worksheets”. |
| Connectivity Configuration:
See “Connectivity Worksheets”. |
| Local LU Dialog: Not required
if you can use the default control point LU. |
| LU name | 1-8
type A EBCDIC characters | |
| LU alias | Up
to 8 characters | |
| Dependent
LU parameters |
| Host LS/DLUR PU | Name of dependent
link station to host or DLUR PU (must be defined before
defining an LU) | |
| LU number | 1-255 This
value must match the LOCADDR
parameter in the VTAM/NCP LU resource definition statement. | |
| Member of default pool | Select
if needed (only for dependent LU) | |
| Local
LU parameters |
| Support syncpoint | Select if needed | |
| Disable password substitution | Select if needed | |
| Restrict to specific SSCP | Select
if needed (only for dependent LU). The SSCP ID is defined
in the SSCPID= field of
the VTAM Start statement. | |
| Remote Node Dialog: Only
configure if the local node is a LEN node. |
| Node's SNA network name | NETNAME.CPNAME
(each 1-8 type A EBCDIC characters) | |
| Partner LU Dialog: Only
required for communication with a LEN node, to define a partner
LU alias, or if the local node is a LEN node. |
| Partner LU name | (NETNAME.LUNAME
(each 1-8 type A EBCDIC characters) | |
| Alias | Up to 8 characters | |
| Uninterpreted name | 1-8
type AE EBCDIC characters (if host LU name is different from PLU
name used locally) | |
| Supports parallel sessions | Select if supported | |
| Location | NETNAME.CPNAME
(each 1-8 type A EBCDIC characters) | |
| LS Routing Dialog: Only
required if partner LU is located by link station. |
| LU name | 1-8
type A EBCDIC characters | |
| LS name | Up to 8 characters | |
| Partner LU name | (NETNAME.LUNAME
(each 1-8 type A EBCDIC characters) | |
| Use partner LU name as a wildcard | Select
if needed | |
| Mode Dialog: Only required
if you are using a nonstandard mode. |
| Name | 1-8
type A EBCDIC characters | |
| COS name | 1-8
type A EBCDIC characters | |
| Session
limits |
| Initial session limit | Up to maximum
session limit; recommended value is 8 | |
| Maximum session limit | Up to 32767 | |
| Minimum contention winner sessions | Up to maximum
session limit; recommended value is 0. | |
| Minimum contention loser sessions | Recommended value
is 0. | |
| Auto-activated sessions | 0
to minimum_contention_winners | |
| Receive
pacing window |
| Initial window size | Recommended value
is 4 | |
| Maximum window size | Optional | |
| Session timeout | | |
| Maximum RU size | Recommended
upper limit is 1024. | |
| Session Security Dialog:
Only required if session security is required for sessions between
a specific local and partner LU. |
| Local LU | 1-8
type A EBCDIC characters | |
| Partner LU | 1-8
type A EBCDIC characters | |
| Password | 16-digit
hexadecimal number | |
| TP Invocation Dialog:
Only required if local TP is to be started in response to requests
from remote systems. |
| TP name | User application:
up to 64 ASCII characters Service TP: up to 8 hexadecimal
digits | |
| Restrict to specific LU | Select if needed | |
| LU alias | Up to 8 characters | |
| Multiple instances supported | Select for nonqueued
TPs | If not selected,
incoming Allocate requests are queued if the TP is already running. |
| Route incoming Allocates to running TP | Select for a
broadcast queued TP | |
| Full path to TP executable | Path and file
name of the executable file (defaults to TP name) | |
| Arguments | Any valid arguments
to the executable | |
| User ID | Up to 64 characters | |
| Group ID | Up
to 64 characters | |
| TP Definition Dialog:
Defines APPC characteristics. |
| TP name | User application:
up to 64 ASCII characters Service TP: up to 8 hexadecimal
digits | |
| Conversation level security required | Select to require
a valid user name and password on allocation requests | |
| Restrict access | Select to require
that user names be included on a security access list | |
| Security access list | Name of security
access list | |
| Conversation type | | |
| Sync level | None
Confirm
Sync-point
None or Confirm
None, Confirm, or Sync-point | |
| PIP allowed | Select
if needed | |
| Conversation Security Dialog:
Only required if conversation security is required for a local TP
that is to be started in response to requests from remote systems. |
| User ID | Up to 10 characters | |
| Password | Up to 10 characters | |
Printable version
