The query_defaults command enables the user to query the default parameters
defined for the node (default parameters are defined using define_defaults).
Supplied Parameters |
 |
No parameters are supplied for this command.
Returned Parameters |
|
Parameter name Type Length Default
description character 31 (null string)
mode_name character 8
implicit_plu_forbidden constant NO
specific_security_sense_codes constant NO
limited_timeout decimal 2
|
If the command executes successfully, the following parameters
are returned:
- description
A text string describing the default parameters,
as specified on the define_defaults command.
- mode_name
Name of the default mode. If an application specifies
an unrecognized mode name when attempting to start a session, the
parameters from this mode are used as a default definition for the
unrecognized mode.
If no default mode name has been specified using the define_defaults command, this parameter is blank.
- implicit_plu_forbidden
Indicates whether SNAplus2 puts implicit definitions in
place for unknown partner LUs. Possible values are:
- YES
SNAplus2 puts implicit definitions in place for unknown
partner LUs.
- NO
SNAplus2 does not put implicit definitions in place
for unknown partner LUs.
- specific_security_sense_codes
Indicates whether SNAplus2 uses specific sense codes on
a security authentication or authorization failure. Specific sense
codes are only returned to those partner LUs which have reported
support for them on the session. Possible values are:
- YES
SNAplus2 uses specific sense codes.
- NO
SNAplus2 does not use specific sense codes.
- limited_timeout
Specifies the timeout after which free limited-resource conwinner
sessions are deactivated. The range is 0-65,535 seconds.
Error Return Codes |
|
If the command cannot be executed, SNAplus2 returns a primary
return code to indicate the type of error and a secondary return
code to provide specific details about the reason for unsuccessful
execution.
No parameter errors occur for this command.
Printable version
