| JAGad93987 | Enhancement Request for support of HA
ATM on workstation class systems. |
| JAGae08235 | Use of non-recommended keywords in the
ATM product and patch control scripts. |
| JAGae10213 | Enhancement request for the elstat command to display the list of multicast MAC address
registered on an ELAN interface. |
| JAGae09966 | Failure Indication messages logged by
LEC stack are not intuitive. |
| JAGae01380 | Data Page fault in the function LDI_F0_search1_sap_entry() |
| JAGae00281 | Multicast traffic over ATM ELAN may not
be restored after failover. |
| JAGad90435 | SAM adds the line ATM_VAR=0 instead of
updating or replacing it in the /etc/atm/atm_x/nic/atmconf (where x=0,1,2....16) file, each time the atm
configuration is accessed. |
| JAGad90063 | The atmconfig show -n command causes the system to panic if the specified
CIP interface corresponds to a non-existent ATM NIC. |
| JAGad78323 | Panic in LDI_F_set_fastpath/bcopy while
processing a badly formatted DLPI msg. |
| JAGad78122 | While starting or stopping an ELAN-configured
interface card, the following error message is displayed:
"[CAAM]
Bad Call Reference Value" |
| JAGad71898 | While replacing an obsoleted J3557A ATM card
with a new A5513A card, the system fails to initialize the card
and displays the error message: "ATM_err_1304: VPI/VCI
range is invalid" |
| JAGad33804 | Panic in SPutMsg with vmtrace ON while
running netperf tests. |
| JAGab50672 | Memory leak in the 512-byte bucket while running
heavy traffic on ELAN interfaces. |
| JAGad67952 | While configuring lan cards on a system
using SAM, the following message is displayed even when there are
no ATM cards present in the system:
"Do
you want to initialize the ATM subsystem? [Yes] [No]" |
Printable version
