Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP 9000 Systems: ATM Release Notes > Chapter 3 ATM Version I.11.11.30

What's in This Version

» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

The information in this section is for version K.11.11.30 of the ATM link software products. This software is designed to run on HP-UX version 11i.

Features and Benefits

This version of the ATM link software products offers the following new features and benefits:

  • Support for OLAR (Online Addition and Replacement) with A5483A, A5513A, and A5515A on L- class, N-class, V-class and Superdome servers.Please refer to Chapter 2 of Configuring HP-UX For Peripherals, HP part number B2355-90698 for detailed information about this feature.

    If you plan on upgrading an existing L-class or N-class system to HP-UX release 11i, read the required OLAR patch information in the Section titled, "Known Problems and Workarounds."

  • Support for A5483A, A5513A, and A5515A adapters on the HP VISUALIZE UNIX B2000 and J6000 workstations.

  • Support for EMS- HA (Event Monitoring Service High Availability) over ATM products on HP-UX workstations (7xx series). Please refer to Chapter 6 of ATM Configuration and Troubleshooting Guide, HP part number B1056-90007 for detailed information about this feature.

  • Support for A5483A, A5513A, and A5515A adapters on L3000, A400, A500, and SuperDome servers

  • ATM drivers for HSC and PCI adapters support automatic update from HP-UX 10.20 or 11.0 to HP-UX 11i using the update-ux tool and specifying the ATM bundle name at the command line or in the GUI when invoked with the -i option.

    NOTE: Automatic update is not supported for the software for HP-PB adapter (J2804A and J2805BA). The software for HP-PB adapter must be re-installed after an update from HP-UX 10.20 or 11.0 to HP-UX 11i
  • ATM can now be selected for installation during an HP-UX 11i cold install. This can reduce the number of system reboots required.

Software Availability

below shows how the ATM software and cards are available on HP-UX 11.11 platform.

Table 3-1 ATM Adapters and Corresponding Software for HP-UX 11.11

ATM Adapter

Corresponding ATM Software

Software Number on HP-UX 11i

"Old" Software Numbers on HP-UX 11.0 or HP-UX 10.20

A5483A

(HP-PCI ATM/622)

ATM-00

(PCI ATM; Supptd HW=A5483A/ A5513A/A5515A/J3557A; SW=J3572AA/J3572BA)

A5483A or J3572BA

A5513A

(HP-PCI ATM/155)

ATM-00

(PCI ATM; Supptd HW=A5483A/ A5513A/A5515A/J3557A; SW=J3572AA/J3572BA)

A5513A or J3572BA

A5515A

(HP-PCI ATM/155)

ATM-00

(PCI ATM; Supptd HW=A5483A/ A5513A/A5515A/J3557A; SW=J3572AA/J3572BA)

A5515A or J3572BA

J2468A

(HP-HSC ATM/622)

ATM-01

(HSC ATM: Supptd HW=J2468A/ J2469A/J2499A/J3420B/J573A; SW=J2806CA)

J2468A or J2806CA

)

J2469A

(HP-HSC ATM/155)

ATM-01

(HSC ATM: Supptd HW=J2468A/ J2469A/J2499A/J3420B/J573A; SW=J2806CA)

J2469A or J2806CA

J2499A

(HP-HSC ATM/155)

ATM-01

(HSC ATM: Supptd HW=J2468A/ J2469A/J2499A/J3420B/J573A; SW=J2806CA)

J2499A or J2806CA

J2804A

(HP-PB ATM/155)

J2804A

(HP-PB ATM/155 Link Software for J2804A)

J2804A or J2805BA

(HP-PB ATM/155 Link Software 6.0 for HP-UX 9000)

J3420B

(HP-HSC ATM/155)

ATM-01

(HSC ATM: Supptd HW=J2468A/ J2469A/J2499A/J3420B/J573A; SW=J2806CA)

J3420B or J2806CA

J3557A

(HP-PCI ATM/155)

ATM-00

(PCI ATM; Supptd HW=A5483A/ A5513A/A5515A/J3557A; SW=J3572AA/J3572BA)

J3557A or J3572BA

J3573A

(HP-HSC ATM/622)

ATM-01

(HSC ATM: Supptd HW=J2468A/ J2469A/J2499A/J3420B/J573A; SW=J2806CA)

J3573A or J2806CA

 

TIP: The software product numbers have been consolidated in HP-UX 11i. The software product number corresponding to all ATM PCI adapters is ATM-00. The software product number corresponding to all HSC adapters is ATM-01. The product number corresponding to HP-PB adapters is unchanged (J2804A).

When a system (with ATM product already installed) is updated from HP-UX 10.20 or 11.0 to HP-UX 11i using the update-ux tool, you will no longer see the "old" ATM software product numbers. Instead you will see the new ATM software product numbers for HP-UX 11i. Automatic update is not supported for the software for HP-PB adapter. The software for HP-PB adapter must be re-installed after an update from HP-UX 10.20 or 11.0 to HP-UX 11i.

See the ATM Configuration and Troubleshooting Guide (p/n B1056-90007) for more details about installing the ATM software products.

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2002 Hewlett-Packard Development Company, L.P.