The fddiif utility is used
to collect operating statistics in real-time on the FDDI adapter
driver.
To invoke the fddiif utility,
enter the following:
fddiif lanx
where x
is the instance number of the adapter.
A sample console output is shown below.
\ Hit Ctrl-C to quit any time.
Transmit statistics: Receive statistics
Transmitted bytes 4499 Packets rcvd by IP 3
Transmitted packets 7 Packets dropped by IP 0
Transmit errors/port error 0 Packets received by ARP 0
Transmit errors/abort 0 Packets dropped by ARP 0
Transmit errors/underrun 0 Packets received by OSI 0
Transmit errors/parity 0 Unknown protocol received 0
Error building header 0 Unknown SNAP prot recvd 0
BAD FSI interrupts 0 Total Frames w/ Err Indic's 0
Dropped frames <SMT counter> 0 Frames w/ Overrun Inds 0
FSI frame err condition<SMT> 0 Frames w/ Parity Errors 0
Frames with E Flag set 0
Frames w/ CRC error set 0
Frames dropped/no first bit 0
Partial pkt/lack of rcv bufs 0
No receive bufs at fill time 0
Receive overflow interrupts 0
LLC rx resets 0 |
Printable version
