 |
» |
|
|
|
A- aggregate instance number, Preparing for Configuration
- algorithm
- HOT_STANDBY, Link Aggregate Advanced Parameters
- LB_IP, Link Aggregate Advanced Parameters
- LB_MAC, Link Aggregate Advanced Parameters
- LB_PORT, Link Aggregate Advanced Parameters
- load balancing, Load Balancing
- application
- hang (failover
group), Solving Failover Group Problems
- hang
(FEC_AUTO mode), Solving Link Aggregate Problems (FEC Mode)
- hang
(LACP_AUTO mode), Solving Link Aggregate Problems (LACP Mode)
- hang
(MANUAL mode), Solving Link Aggregate Problems (MANUAL Mode)
C- caution
- binary file, lanconfig File
- HP Serviceguard and
HOT_STANDBY mode, Link Aggregate Advanced Parameters
- lanadmin -a option, Invoking lanadmin from the Command Line
- lanadmin command, Using the lanadmin Command
- lanqueryconf command, Editing Configuration Files for Failover Groups
- CKO
- and link aggregates, Solving Link Aggregate Problems (LACP Mode), Solving Link Aggregate Problems (FEC Mode)
- command
- ioscan, Scanning the System Hardware
- lanadmin, Using the lanadmin Command
- lanqueryconf, Editing Configuration Files for Failover Groups
- lanscan, Verifying the Configuration
- nettl, nettl Tracing and Logging Tool
- ping, Testing Access to Internet Network Hosts
- swlist, Verifying the Installation
- swremove, Removing the Software
- configuration, Sample Failover Group Using Link Aggregates Configuration
- (see also sample configuration)
- FEC_AUTO mode example, FEC_AUTO Port Configuration Mode
- high availability, Hot Standby for High Availability
- LACP_AUTO mode example, LACP_AUTO Port Configuration Mode
- MANUAL mode example, MANUAL Port Configuration Mode
- samples, HP APA Configuration Examples - Server-to-Server with Switch (Not Recommended)
- server-to-server
with switch, Sample Server-to-Server Configuration with Switch (Not Recommended)
- tip to display Procurve command syntax, Procurve 9304/8
- using SAM, Configuring a Link Aggregate - Using SAM to Configure a MANUAL Mode Link Aggregate,
- verifying, Verifying the Configuration
- configuration
file, lanconfig.ascii File
- (see also file)
- lanconfig.ascii, lanconfig.ascii File
- lanconfig.ascii fields, lanconfig.ascii File - lanconfig.ascii File
- configuration mode, Preparing for Configuration
- configuration worksheet, Preparing for Configuration
- connection
- abnormal termination (failover group), Solving Failover Group Problems
- abnormal termination (FEC_AUTO mode), Solving Link Aggregate Problems (FEC Mode)
- abnormal termination (LACP_AUTO mode), Solving Link Aggregate Problems (LACP Mode)
- abnormal termination (MANUAL mode), Solving Link Aggregate Problems (MANUAL Mode)
- packet loss, Solving Link Aggregate Problems (LACP Mode)
F- failover group, Proactive Failover Examples
- (see also proactive failover)
- abnormal connection termination, Solving Failover Group Problems
- and SAM, HP System Administration Manager
- and telnet command, Solving Failover Group Problems
- and TSO, TCP Segmentation Offload
- and VLAN, Configuring VLANs over Failover Groups
- application hanging, Solving Failover Group Problems
- configuration example, Example: Configuring a Failover Group
- configuration with link aggregates, Failover Group Using Link Aggregates
- configuring by editing files, Editing Configuration Files for Failover Groups
- configuring IP address, Configuring an IP Address
- configuring switch for, Configuring the Link Partner
- description, Failover Group
- host is unreachable message, Solving Failover Group Problems
- including a link aggregate, Failover Group
- name format in lanconfig.ascii file, lanconfig.ascii File
- network is unreachable message, Solving Failover Group Problems
- permission denied message, Solving Failover Group Problems
- sample syslog status messages, Examples
- simple configuration, Failover Group
- switch restrictions, Failover Group Using Link Aggregates
- unknown host message, Solving Failover Group Problems
- verifying active ports, Solving Failover Group Problems
- verifying configuration, Solving Failover Group Problems
- verifying
correct active port, Solving Failover Group Problems
- verifying if enabled, Solving Failover Group Problems
- verifying member ports, Solving Failover Group Problems
- verifying
ready port, Solving Failover Group Problems
- failover policy, Preparing for Configuration
- FAILOVER_GROUP, lanconfig.ascii File
- features, Introduction
- FEC_AUTO mode, Preparing for Configuration
- configuration example, FEC_AUTO Port Configuration Mode
- configuring by editing files, Editing Files for MANUAL, FEC_AUTO, or LACP_AUTO Mode - LACP_AUTO Port Configuration Mode,
- configuring with lanadmin, Invoking lanadmin from the Command Line
- configuring with SAM, Configuring an FEC_AUTO Mode Link Aggregate - Configuring an FEC_AUTO Mode Link Aggregate
- verifying link partner configuration, Solving Link Aggregate Problems (FEC Mode)
- file
- editing for APA configuration, Editing Configuration Files for Link Aggregates - LACP_AUTO Port Configuration Mode,
- hp_apaconf, What Happens During Start Up?, hp_apaconf File - hp_apaconf File
- hp_apaportconf, What Happens During Start Up?, hp_apaportconf File - hp_apaportconf File
- netconf, Editing Configuration Files for Failover Groups
- file access
- verifying (failover group), Solving Failover Group Problems
- verifying (FEC_AUTO mode), Solving Link Aggregate Problems (FEC Mode)
- verifying (LACP_AUTO mode), Solving Link Aggregate Problems (LACP Mode)
- verifying (MANUAL mode), Solving Link Aggregate Problems (MANUAL Mode)
- FIRST_APA_PORT, Modifying HP APA Global Parameters
- FIRST_LACP_PORT, Modifying HP APA Global Parameters
G- global parameter
- default port mode, Modifying HP APA Global Parameters
- LACP SYSID mode, Modifying HP APA Global Parameters
- LACP timeout, Modifying HP APA Global Parameters
- maximum link aggregates, Modifying HP APA Global Parameters
- Use syslog, Modifying HP APA Global Parameters
- group (see failover group)
- group capability, hp_apaconf File
- and multiple link aggregates, Link Aggregate Advanced Parameters
- specifying
in hp_apaconf file, hp_apaconf File
- specifying
in hp_apaportconf file, hp_apaportconf File
- specifying on configuration worksheet, Link Aggregate Advanced Parameters
H- host is unreachable message
- in failover group, Solving Failover Group Problems
- in FEC_AUTO mode
link aggregates, Solving Link Aggregate Problems (FEC Mode)
- in LACP_AUTO mode
link aggregate, Solving Link Aggregate Problems (LACP Mode)
- in MANUAL mode link
aggregate, Solving Link Aggregate Problems (MANUAL Mode)
- Hot Standby mode
- sample configuration, Hot Standby for High Availability
- HOT_STANDBY algorithm, Link Aggregate Advanced Parameters
- and switch ports, Solving Link Aggregate Problems (MANUAL Mode)
- HOT_STANDBY mode
- configuring switch for, Configuring the Link Partner
- HP APA
- configuring FEC_AUTO mode with
lanadmin, Invoking lanadmin from the Command Line
- configuring using SAM, Configuring a Link Aggregate - Using SAM to Configure a MANUAL Mode Link Aggregate,
- HP Serviceguard
- and HP APA, Interoperability
- and HP APA capabilities, Product Specifications
- caution about link configuration, Link Aggregate Advanced Parameters
- when to configure, Configuring HP Serviceguard
- HP_APA_DEFAULT_PORT_MODE, hp_apaconf File
- HP_APA_GROUP_CAPABILITY, hp_apaconf File
- HP_APA_HOT_STANDBY, hp_apaconf File
- HP_APA_INTERFACE_NAME, hp_apaconf File
- HP_APA_KEY, hp_apaconf File
- HP_APA_LACP_SYSTEM_ID_MODE, hp_apaconf File
- HP_APA_LOAD_BALANCE_MODE, hp_apaconf File
- HP_APA_MANUAL_LA, hp_apaconf File
- HP_APA_MAX_LINKAGGS, hp_apaconf File
- HP_APA_USE_SYSLOG, hp_apaconf File
- hp_apaconf
file
- parameters, hp_apaconf File - hp_apaconf File
- startup processing, What Happens During Start Up?
- HP_APAPORT_CONFIG_MODE, hp_apaportconf File
- HP_APAPORT_GROUP_CAPABILITY, hp_apaportconf File
- HP_APAPORT_INTERFACE_NAME, hp_apaportconf File
- HP_APAPORT_KEY, hp_apaportconf File
- HP_APAPORT_PRIORITY, hp_apaportconf File
- HP_APAPORT_SYSTEM_PRIORITY, hp_apaportconf File
- hp_apaportconf
file
- parameters, hp_apaportconf File - hp_apaportconf File
- startup processing, What Happens During Start Up?
L- LACP
- System ID, Modifying HP APA Global Parameters
- timeout, Modifying HP APA Global Parameters
- LACP_AUTO mode, Preparing for Configuration
- configuration example, LACP_AUTO Port Configuration Mode
- configuring by editing
files, Editing Files for MANUAL, FEC_AUTO, or LACP_AUTO Mode - LACP_AUTO Port Configuration Mode,
- configuring with SAM, Configuring an FEC_AUTO Mode Link Aggregate - Configuring an FEC_AUTO Mode Link Aggregate
- LAN_MONITOR mode, Preparing for Configuration
- capabilities, Product Specifications
- configuration with link aggregates, Failover Group Using Link Aggregates
- failover group example, Example: Configuring a Failover Group
- proactive failover example, Proactive Failover Examples
- simple configuration, Failover Group
- switch restrictions, Failover Group Using Link Aggregates
- lanadmin
command
- -a option
caution, Invoking lanadmin from the Command Line
- -X
options, Set Options - Set Options
- -x
options, Display Options - Display Options
- caution, Using the lanadmin Command
- command line use, Invoking lanadmin from the Command Line
- displaying statistics, Viewing HP APA Statistics
- interactive use, Using lanadmin Interactively
- syntax, Set Options
- tasks, Using the lanadmin Command
- test selection, Using lanadmin Interactively
- verifying TSO support, TCP Segmentation Offload
- lanconfig file, lanconfig File
- lanconfig.ascii file
- fields, lanconfig.ascii File - lanconfig.ascii File
- sample, lanconfig.ascii File
- lanqueryconf
- caution, Editing Configuration Files for Failover Groups
- lanqueryconf command, Editing Configuration Files for Failover Groups
- lanscan command
- verifying HP APA configuration, Verifying the Configuration
- Large Send (see TSO)
- LB_IP
- algorithm, Link Aggregate Advanced Parameters
- specifying in hp_apaconf file, hp_apaconf File
- LB_MAC
- specifying in hp_apaconf file, hp_apaconf File
- LB_MAC algorithm, Link Aggregate Advanced Parameters
- LB_PORT
- specifying in hp_apaconf file, hp_apaconf File
- LB_PORT
algorithm, Link Aggregate Advanced Parameters
- link aggregate
- adding ports
using SAM, Adding Ports to or Deleting Ports from Link Aggregate
- and TSO, TCP Segmentation Offload
- and VLAN, Configuring VLANs over Link Aggregates
- configuring by editing files, Editing Configuration Files for Link Aggregates - LACP_AUTO Port Configuration Mode,
- configuring
FEC_AUTO mode by editing files, Editing Files for MANUAL, FEC_AUTO, or LACP_AUTO Mode - LACP_AUTO Port Configuration Mode,
- configuring FEC_AUTO mode
using SAM, Configuring an FEC_AUTO Mode Link Aggregate - Configuring an FEC_AUTO Mode Link Aggregate
- configuring
IP address, Configuring an IP Address
- configuring LACP_AUTO mode by
editing files, Editing Files for MANUAL, FEC_AUTO, or LACP_AUTO Mode - LACP_AUTO Port Configuration Mode,
- configuring LACP_AUTO mode using SAM, Configuring an FEC_AUTO Mode Link Aggregate - Configuring an FEC_AUTO Mode Link Aggregate
- configuring MANUAL mode by editing files, Editing Files for MANUAL, FEC_AUTO, or LACP_AUTO Mode - LACP_AUTO Port Configuration Mode,
- configuring MANUAL mode
using SAM, Using SAM to Configure a MANUAL Mode Link Aggregate - Using SAM to Configure a MANUAL Mode Link Aggregate
- configuring using SAM, Configuring Link Aggregates, Configuring Link Aggregates, Configuring Link Aggregates
- deleting ports using SAM, Adding Ports to or Deleting Ports from Link Aggregate
- description, Link Aggregate
- displaying
advanced options using SAM, Configuring an FEC_AUTO Mode Link Aggregate, Link Aggregate Advanced Options
- displaying status using
SAM, Status of Configured Link Aggregate is UP
- displaying using SAM, Displaying Link Aggregates, Link Aggregates Supporting HP APA, Display Link Aggregates to Configure, Configured Link Aggregates Display
- in failover
groups, Failover Group Using Link Aggregates
- including in failover group, Failover Group
- maximum number of, Modifying HP APA Global Parameters
- not enabled, Preparing for Configuration
- parameters for, hp_apaconf File
- sample syslog status messages, Examples
- switch restrictions in failover
group, Failover Group Using Link Aggregates
- verifying active ports (FEC_AUTO mode), Solving Link Aggregate Problems (FEC Mode)
- verifying active ports (LACP_AUTO mode), Solving Link Aggregate Problems (LACP Mode)
- verifying active ports (MANUAL mode), Solving Link Aggregate Problems (MANUAL Mode)
- verifying configuration (LACP_AUTO mode), Solving Link Aggregate Problems (LACP Mode)
- verifying configuration (MANUAL mode), Solving Link Aggregate Problems (MANUAL Mode)
- verifying if enabled (FEC_AUTO mode), Solving Link Aggregate Problems (FEC Mode)
- verifying if enabled (LACP_AUTO mode), Solving Link Aggregate Problems (LACP Mode)
- verifying if enabled (MANUAL mode), Solving Link Aggregate Problems (MANUAL Mode)
- verifying member ports (FEC_AUTO mode), Solving Link Aggregate Problems (FEC Mode)
- verifying member ports (LACP_AUTO mode), Solving Link Aggregate Problems (LACP Mode)
- verifying member ports (MANUAL mode), Solving Link Aggregate Problems (MANUAL Mode)
- link partner
- configuring, Configuring the Link Partner
- verifying configuration (failover
group), Solving Failover Group Problems
- verifying
configuration (FEC_AUTO mode), Solving Link Aggregate Problems (FEC Mode)
- verifying configuration (LACP_AUTO
mode), Solving Link Aggregate Problems (LACP Mode)
- verifying configuration (MANUAL
mode), Solving Link Aggregate Problems (MANUAL Mode)
- LM_RAPID_ARP, lanconfig.ascii File
- LM_RAPID_ARP_COUNT, lanconfig.ascii File
- LM_RAPID_ARP_INTERVAL, lanconfig.ascii File
- load balancing, Link Aggregate Advanced Parameters
- (see also load
distribution)
- algorithm, Load Balancing
- description, Load Balancing
- parameter, hp_apaconf File
- load distribution, Link Aggregate Advanced Parameters
- log
- syslog, Logging Messages to the syslog.log File
M- MAC address
- and failover group, Failover Group, Failover Group Advanced Parameters
- and link aggregate, Link Aggregate
- load balancing, Link Aggregate Advanced Parameters
- MANUAL mode, Preparing for Configuration
- configuration example, MANUAL Port Configuration Mode
- configuring by editing files, Editing Files for MANUAL, FEC_AUTO, or LACP_AUTO Mode - LACP_AUTO Port Configuration Mode,
- configuring
with SAM, Using SAM to Configure a MANUAL Mode Link Aggregate - Using SAM to Configure a MANUAL Mode Link Aggregate
- Maximum Transmission Unit (see MTU)
- message, Logging Messages to the syslog.log File
- (see also status message)
- MTU
- virtual, TCP Segmentation Offload
N- netconf file, Editing Configuration Files for Failover Groups
- nettl command, nettl Tracing and Logging Tool
- TSO status messages, nettl Tracing and Logging Tool
- network is unreachable message
- in failover group, Solving Failover Group Problems
- in FEC_AUTO mode
link aggregates, Solving Link Aggregate Problems (FEC Mode)
- in LACP_AUTO mode
link aggregate, Solving Link Aggregate Problems (LACP Mode)
- in MANUAL mode
link aggregate, Solving Link Aggregate Problems (MANUAL Mode)
- network physical port (see physical port)
- NIC
- verifying claiming, Solving HP APA Problems
- verifying installation, Solving HP APA Problems
- verifying operation, Solving HP APA Problems
- NODE_NAME, lanconfig.ascii File
P- packet loss, Solving Link Aggregate Problems (LACP Mode)
- packet ordering, Load Balancing
- parameter, Modifying HP APA Global Parameters
- (see also global parameter)
- permission denied message
- in failover group, Solving Failover Group Problems
- in FEC_AUTO mode link
aggregates, Solving Link Aggregate Problems (FEC Mode)
- in LACP_AUTO mode link
aggregate, Solving Link Aggregate Problems (LACP Mode)
- in MANUAL mode link
aggregate, Solving Link Aggregate Problems (MANUAL Mode)
- physical port
- displaying using SAM, Configuring an FEC_AUTO Mode Link Aggregate, Network Physical Ports Supporting APA
- modifying attributes using
SAM, Modify Network Physical Port Attributes
- modifying with SAM, Modify Network Physical Port Attributes
- ping command, Testing Access to Internet Network Hosts
- polling interval
- specifying in lanconfig.ascii
file, lanconfig.ascii File
- specifying on configuration worksheet, Failover Group Advanced Parameters
- POLLING_INTERVAL, lanconfig.ascii File
- port
- verifying active in failover group, Solving Failover Group Problems
- verifying membership in failover group, Solving Failover Group Problems
- verifying ready in failover group, Solving Failover Group Problems
- verifying UP in failover group, Solving Failover Group Problems
- port aggregation
- statistics, Viewing HP APA Statistics
- port cost, Preparing for Configuration
- port mode, Modifying HP APA Global Parameters
- port priority, Preparing for Configuration
- PRIMARY, lanconfig.ascii File
- priority-based
failover
- comparison with proactive failover, Proactive Failover
- proactive failover, Preparing for Configuration
- configuration example, Proactive Failover Examples
- description, Proactive Failover
- problem
- gathering information, Gathering Information
- reporting to HP, Reporting Problems
- product
- specifications, Product Specifications
S- SAM, HP System Administration Manager
- adding ports, Adding Ports to or Deleting Ports from Link Aggregate
- and
failover groups, HP System Administration Manager
- configuring FEC_AUTO
mode link aggregate, Configuring an FEC_AUTO Mode Link Aggregate - Configuring an FEC_AUTO Mode Link Aggregate
- configuring LACP_AUTO mode link aggregate, Configuring an FEC_AUTO Mode Link Aggregate - Configuring an FEC_AUTO Mode Link Aggregate
- configuring
link aggregates, Configuring Link Aggregates, Configuring Link Aggregates, Configuring Link Aggregates
- configuring MANUAL
mode, Using SAM to Configure a MANUAL Mode Link Aggregate - Using SAM to Configure a MANUAL Mode Link Aggregate
- deleting ports, Adding Ports to or Deleting Ports from Link Aggregate
- displaying advanced options, Link Aggregate Advanced Options
- displaying link aggregate advanced options, Configuring an FEC_AUTO Mode Link Aggregate
- displaying link aggregate status, Status of Configured Link Aggregate is UP
- displaying
link aggregates, Displaying Link Aggregates, Link Aggregates Supporting HP APA, Display Link Aggregates to Configure, Configured Link Aggregates Display
- displaying
physical ports, Configuring an FEC_AUTO Mode Link Aggregate, Network Physical Ports Supporting APA
- modifying physical port attributes, Modify Network Physical Port Attributes, Modify Network Physical Port Attributes
- sample configuration
- enterprise
intranet client/server, Sample Enterprise Intranet Client/Server Configuration
- failover
group, Sample Failover Group (LAN_MONITOR) Configuration
- hot standby, Hot Standby for High Availability
- LAN Monitor failover group with link aggregations, Sample Failover Group Using Link Aggregates Configuration
- LAN_MONITOR mode, Sample Failover Group (LAN_MONITOR) Configuration
- no switch
between router and server, Sample Router and Server Configuration (No Switch)
- server-to-server, Sample Server-to-Server Configuration (Back-to-Back)
- switch between router and server, Sample Router and Server Configuration (Switch)
- server-to-server configuration
- back-to-back, Sample Server-to-Server Configuration (Back-to-Back)
- with switch, Server-to-Server with Switch (Not Recommended)
- Serviceguard (see HP Serviceguard)
- software
- capabilities, Product Specifications
- configured in kernel, Verifying the Installation, Solving HP APA Problems
- installation
requirements, Installation Requirements
- installing, Installing the Software
- removing, Removing the Software
- startup, What Happens During Start Up?
- verifying the installation, Verifying the Installation
- specifications, Product Specifications
- Split Multi-Link Trunking, Supported Switches
- STANDBY, lanconfig.ascii File
- startup event, What Happens During Start Up?
- STATIONARY_IP, lanconfig.ascii File
- statistics
- displaying, Viewing HP APA Statistics
- types of, Viewing HP APA Statistics
- status message
- logging to syslog, Logging Messages to the syslog.log File
- sample, Examples
- switch
- and Nortel
SMLT support, Supported Switches
- configuring, Configuring the Link Partner
- limitations
in router and server configuration, Sample Router and Server Configuration (Switch)
- potential limitations, Link Aggregate
- potential limitations server to
server, Server-to-Server with Switch (Not Recommended)
- supported, Supported Switches
- swlist command, Verifying the Installation
- swremove command, Removing the Software
- syslog
- logging status messages, Logging Messages to the syslog.log File, hp_apaconf File
- syslog.log file, Modifying HP APA Global Parameters
- system
- booted with errors, Solving HP APA Problems
- power not on, Solving HP APA Problems
- System Administration Manager (see SMH)
T- TCP Segmentation Offload (see TSO)
- telnet command
- verifying success (failover group), Solving Failover Group Problems
- verifying success (FEC_AUTO mode), Solving Link Aggregate Problems (FEC Mode)
- verifying success (LACP_AUTO mode), Solving Link Aggregate Problems (LACP Mode)
- verifying success (MANUAL mode), Solving Link Aggregate Problems (MANUAL Mode)
- test
- lanadmin
command, Using lanadmin Interactively
- tip
- displaying
Procurve command syntax, Procurve 9304/8
- specifying group capability, Link Aggregate Advanced Parameters
- troubleshooting, Troubleshooting HP APA
- TSO
- and
failover group, TCP Segmentation Offload
- and
link aggregate, TCP Segmentation Offload
- status
messages, nettl Tracing and Logging Tool
- verifying support, TCP Segmentation Offload
|
Printable version
