 |
» |
|
|
|
To verify that the HP APA
software (J4240AA) has been successfully installed, complete the following
steps: Verify that the product was
installed by issuing the following command: # swlist -l product | grep -i HP-APA |
Output similar to the following displays: HP-APA-FMT B.11.23.40 HP Auto-Port Aggregation APA formatter product.
HP-APA-KRN B.11.31.20 HP Auto-Port Aggregation kernel products.
HP-APA-LM B.11.31.20 HP Auto-Port Aggregation LM commands.
HP-APA-NETMOD B.11.31.20 HP Auto-Port Aggregation nwmgr/NCweb libraries.
HP-APA-RUN B.11.31.20 HP Auto-Port Aggregation APA command products. |
If the sub-products are not displayed, reinstall the software.
See “Installing the Software” for more
information. Verify that
the software is configured in the kernel by issuing the following
command: # what /stand/vmunix | egrep -i hp_apa |
Output similar to the following
displays: $Revision: hp_apa: HP Auto-Port Aggregation (APA): B.11.31.20 Aug 20 2008 11:30 |
If nothing is displayed, rebuild the kernel.
|
Printable version
