Configuring an IP Address

After you configure HP APA, you must configure an IP address on the interface. To configure an IP address for a link aggregate, use the following command:

# ifconfig lanxxx IP_address up

Where xxx is the link aggregate PPA number.

To make this change permament, edit the /etc/rc.config.d/netconf file and include the appropriate entry. For more information, see ifconfig(1M).

For failover groups, you must configure an IP address on the interface that is to be the primary link before running the lanqueryconf and lanapplyconf commands to configure the failover group. For more information, see “Editing Configuration Files for Failover Groups”.