Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
 HP Domain Commerce Installation Guide > Chapter 2 Installing HP Domain Commerce

Installation Requirements
» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

spacerspacerspacer
spacer
spacer
  		 
 

Intended User

To successfully install and configure HP Domain Commerce, the user should have experience with HP-UX 10.20 and at least two of the following:

  • HP DESMS

  • HP ServiceControl

  • Netscape Enterprise Server

  • vPOS

  • Oracle database

Hardware Requirements

  • HP 9000 Computer System

  • CD-ROM drive to load the software

  • At least 256 MB of memory

  • At least 2 GB of free disk space to load the software. This includes the disk space required for the Oracle database.

    For the example provided in Chapter 3 “Installation and Configuration Example”, you will need to allocate the following amount of disk space to the specified directories (this disk space is included in the 2 GB):

    Table 2-1 Disk Space Needed for the Installation and Configuration Example

    Directory NameMinimum Disk Space Requirements (MB)
    /u01600
    /domain/oradata100
    /domain/vpos40

     

Software Requirements

  • Oracle database

    This release of HP Domain Commerce does not include the Oracle database software required by vPOS. You can purchase the database software directly from Oracle Corporation.

Operating System Requirements

  • HP-UX 10.20

Other Installation Information

  • The Oracle database software requires certain HP-UX kernel parameters to be configured at a minimum value. For a list of the kernel parameters and recommended values, refer to the online HTML guide, Oracle7 Server Installation Guide for HP 9000 Series 700/800, located in the oracle/orainst/doc/platform/doc/IG73 directory. Specifically, the kernel parameters to configure are listed in the file ch3.html. This directory is included with the Oracle database software.

  • Installation information for the Oracle database product can be found in the following manuals:

    Oracle7 Server Installation Guide for HP 9000 Series 700/800

    Oracle7 Reference Addendum for HP 9000 Series 700/800

    Getting Started with Oracle7 for UNIX

    Oracle7 Administrator's Reference for UNIX

    HTML versions of the HP-specific manuals can be found on Oracle's software CD-ROM in the directory oracle/orainst/doc/platform/doc.

  • If you order an nCipher cryptographic accelerator, consider the following:

    • On a K-Class system, you may need to replace the tape or CD-ROM drive with the accelerator. Note that you will need the CD-ROM drive to install your software.

    • On a K-Class system, an external accelerator requires an SE connector. If one is not available, you can order an adapter card from HP, such as the HP-PB SCSI/Centronic Host adapter, part number 28655-60001.

    • On a V-Class system, an external accelerator requires a converter to convert between fastwide differential SCSI and single-sided SCSI. A converter can be ordered from HP, such as the HP SCSI bus converter, product number C4316A.



Chapter 2 Installing HP Domain Commerce
  		 


Product Installation Overview  
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1999 Hewlett-Packard Development Company, L.P.