Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP-UX PA-RISC-Based Systems: GigEther-01 (igelan) Gigabit Ethernet Driver for HP-UX 11i v 1.0 Release Notes > Chapter 1 GigEther-01 (igelan) Gigabit Ethernet Driver for HP-UX 11i v 1.0 Release Notes

Firmware Requirements

» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

The rx8620 and rx7620 servers require system firmware version 1.009 or higher in order to use PCI-X cards. The PCI-X cards that work in those systems and that use the igelan driver are the A9782A and A9784A PCI-X 2Gb Fibre Channel and Gigabit Ethernet combination cards

Table 1-1 rx8620/rx7620 Systems Require a Specific Firmware Level in order to Support PCI-X Cards

PCI-X Cards Supported by igelan Driver that Are Used in the rx8620/rx7620

Max Cards per System

Card Description

Minimum Firmware Version Required

A9782A/A9784A

16

PCI-X 2Gb Fibre Channel/Gigabit Ethernet combination

PDC 1.009

 

Any rx8620 and rx7620 systems shipped from the factory before May 2004 need to have system firmware version 1.009 or greater in order to support the above I/O cards on HP-UX. Beginning in May 2004, all rx7620 and rx8620 platforms shipped will have the latest system firmware (v1.014 or later).

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2004 Hewlett-Packard Development Company, L.P.