How to Verify that the Correct Driver is in the Kernel

For instructions on how to install and configure the hardware and software, refer to the installation guide for your LAN card such as the A6825A/A6847A PCI Gigabit Ethernet Card for HP-UX 11i v 1.0 Installation Guide or the A9782A/A9784A PCI-X Fibre Channel and Gigabit Ethernet Card for HP-UX 11i v 1.0 Installation Guide available on the web at http://docs.hp.com under “Networking and Communications.” The required operating environment is HP-UX 11i v 1.0. The operating environment version should show as B.11.11 when you type: uname -a at the system prompt. For the June 2004 release of HP-UX 11i v 1.0, Gigabit Ethernet cards such as the A6825A and A6847A cards require the igelan B.11.11.10 driver from the GigEther-01 bundle. To verify that the driver was loaded in the kernel, execute the following command:

what /stand/vmunix |grep drivername
where drivername is igelan (for Gigabit Ethernet)

You should see a response like:

igelan_ilan Version: 1 	 							May 18 2004
igelan Revision: B.11.11.10 May 18 2004