This section describes the steps for displaying a list of
the logical drives configured for the HP RAID 4Si controller. You
can follow two different menu paths to display the logical drives. Note that these steps assume you have started
IRM and (if applicable) selected the HP RAID 4Si controller whose
logical drives you want to display.
First menu path: "Management
Menu" → Configure → View/Add Configuration
The "View/Add Configuration- ARRAY SELECTION MENU" displays.
Press F3. The "Logical Drives Configured" screen
displays, listing all of the configured logical drives.
When you have finished viewing
the information, press any key. You are placed back in the "View/Add
Configuration - ARRAY SELECTION MENU."
Press Esc. You are placed in the "Configure" menu.
Press Esc. You are placed in the "Management Menu."
Press Esc. An exit confirmation dialog box displays.
Highlight YES and press Enter; IRM ends.
Second menu path: "Management
Menu" → Objects → Physical Drive
The "Objects - PHYSICAL DRIVE SELECTION MENU" displays.
Press F3. The "Logical Drives Configured" screen
displays, listing all of the configured logical drives.
When you have finished viewing
the list, press any key. You are placed in the "Objects
- PHYSICAL DRIVE SELECTION MENU."
Press Esc. You are placed in the "Objects" menu.
Press Esc. You are placed in the "Management Menu."
Press Esc. An exit confirmation dialog box displays.
Highlight YES and press Enter; IRM ends.
Printable version
