This section describes the steps for viewing a logical drive's configuration. Note that these steps assume you have started
IRM and (if applicable) selected the HP RAID 4Si controller the logical
drive is configured on.
Menu path: "Management
Menu" → Objects → Logical Drive
The "Logical Drives" menu displays.
On the "Logical
Drives" menu, select the drive whose configuration information
you want to see. The "Logical Drive n" menu displays.
Select Properties. A different (longer) "Logical Drive
n" menu displays, listing all of the properties
of the logical drive you selected.
When you have finished viewing
the drive's information, press Esc. You are placed in the shorter "Logical Drive
n" menu.
Press Esc. You are placed in the "Logical Drives" menu.
Press Esc. You are placed in the "Objects" menu.
Press Esc. You are placed in the "Management Menu."
Press Esc. An exit confirmation dialog box displays.
Highlight YES and press Enter; IRM ends.
Printable version
