This section describes the steps for changing the Write Policy
setting for a logical drive. Note that these
steps assume you have started IRM and (if applicable) selected the
HP RAID 4Si controller the logical drive is configured on.
Menu path: "Management
Menu" → Objects → Logical Drive
The "Logical Drives" menu displays.
Select the logical
drive whose Write Policy you want to change. The "Logical
Drive n" menu displays.
Select Properties. A different (longer) "Logical Drive
n" menu displays, listing all of the properties
of the logical drive you selected.
Select Write Policy. The "Write Policy" menu displays,
listing the possible values.
Highlight the value you want
(WRTHRU or WRBACK) and press Enter. You are placed in the longer "Logical Drive
n" menu.
Press Esc. You are placed in the shorter "Logical Drive
n" menu.
Press Esc. You are placed in the "Logical Drives" menu.
Press Esc. You are placed in the "Objects" menu.
Press Esc. You are placed in the "Management Menu."
Press Esc. An exit confirmation dialog box displays.
Highlight YES and press Enter; IRM ends.
Printable version
