Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
 HP A7173A PCI-X Dual Channel Ultra320 SCSI Host Bus Adapter Support Guide: HP-UX 11i v1, 11i v2, and 11i v3

Chapter 3 Configuring the A7173A Adapter
» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Glossary

 » Index

spacerspacerspacer
spacer
spacer
  		 
 

Table of Contents

Setting the SCSI Parameters
About SCSI IDs
Setting SCSI IDs Offline
Setting SCSI IDs Online
About the Maximum Data Transfer Rate
Setting the Maximum Data Transfer Rate Offline
Setting the Maximum Data Transfer Rate Online
About Bus Width
Setting the Bus Width Offline
Setting the Bus Width Online
About Auto-Termination
Configuration Worksheet
Setting and Confirming SCSI Parameters Offline
Using the BCH Menus on HP 9000 Systems
Using the EFI Utility on HP Integrity Systems
Setting and Confirming SCSI Parameters Online
Using mptconfig for Online Configuration
Setting SCSI Parameters to Default Values
Offline
Online
Configuring LUN 0
Using the A7173A Adapter as a Boot Device

This chapter contains the following sections describing configuration of the A7173A adapter:

NOTE: This manual provides installation instructions and technical information for qualified personnel who maintain or service HP-UX systems. Installing the A7173A adapter requires proficiency in both hardware configuration and software administration.


Adding Multi-Initiator Support
  		 


Setting the SCSI Parameters  
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2007 Hewlett-Packard Development Company, L.P.