Setting SCSI Parameters to Default Values

On HP 9000 systems, the SCSI parameters for the A7173A adapter can be set to the default values offline, using the SCSI command accessed from the Boot Console Handler (BCH) menus.

Depending on the system, the SCSI command may have a “default” option. If there is a default option, use it. If there is no default option, the SCSI command will have to be issued for each SCSI parameter that you need to change. See “Using the BCH Menus on HP 9000 Systems” for details.

On HP Integrity® systems, the SCSI parameters for the A7173A adapter can be set to the default values offline using the EFI utilities. Each SCSI parameter has to be individually set to it’s default value. See “Using the EFI Utility on HP Integrity Systems”, for details.