Reporting Problems to Your Hewlett-Packard Support Contact

A characterization of the problem. Describe the events leading up to and including the problem. Attempt to describe the source of the problem. Describe the symptoms of the problem and what led up to the problem.

Your characterization should include the following: HP-UX commands, communication subsystem commands, job streams, result codes and messages, and data that can reproduce the problem.

Illustrate as clearly as possible the context of any message(s). Prepare copies of information displayed at the system console and user terminal.

Obtain the version, update, and fix information for all software.

To check your Kerberos Server version, execute the what binary_name command, where the binary_name indicates a Kerberos Server binary such as kadmin, kdcd or kadmind.

To check the version of your kernel, execute uname -r.

This allows your support contact to determine if the problem is already known, and if the correct software is installed at your site.

Record all error messages and numbers that appear at the user terminal and the system console.

Save all network log files.

Prepare the formatted output and a copy of the log file for your Hewlett-Packard support contact to further analyze.

Prepare a listing of the HP-UX I/O configuration you are using for your Hewlett-Packard support contact to further analyze.

Try to determine the general area within the software where you think the problem exists. Refer to the appropriate reference manual and follow the guidelines on gathering information for problems.

Document your interim or "workaround" solution. The cause of the problem can sometimes be found by comparing the circumstances in which it occurs with the circumstances in which it does not occur.

Create copies of any Internet Services or other trace files that were active when the problem occurred for your Hewlett-Packard support contact to further analyze.

In the event of a system failure, a full memory dump must be taken. Use the HP-UX utility /sbin/savecore to save a core dump. See the HP-UX System Administration Tasks manual for details. Send the output to your Hewlett-Packard support contact.