Configuring Multiple Adoptive Nodes for Cascading Failover

This configuration has two packages and three servers. One server is the primary node for both packages. The other servers are adoptive nodes for the two packages. Figure 3-5 “Cascading Failover with Three Servers” illustrates this configuration. Dotted lines indicate which servers are adoptive nodes for the packages. Figure 3-6 “Cascading Failover with Three Servers After One Server Fails” illustrates the configuration after host thyme fails.

Figure 3-5 Cascading Failover with Three Servers

Figure 3-6 “Cascading Failover with Three Servers After One Server Fails” shows the cascading failover configuration after host thyme has failed. Host basil is the first adoptive node configured for pkg01, and host sage is the first adoptive node configured for pkg02.

Figure 3-6 Cascading Failover with Three Servers After One Server Fails

Cluster Configuration File for Three-Server Cascading Failover

This section shows the cluster configuration file (cluster.conf) for this configuration example. The comments are not shown.

CLUSTER_NAME             Cascading
 
QS_HOST                  qs
QS_POLLING_INTERVAL      300000000
 
NODE_NAME                thyme
  NETWORK_INTERFACE      eth0
    HEARTBEAT_IP         192.100.112.146
  NETWORK_INTERFACE      eth1
 
NODE_NAME                basil
  NETWORK_INTERFACE      eth0
    HEARTBEAT_IP         192.100.112.168
 
NODE_NAME                sage
  NETWORK_INTERFACE      eth0
    HEARTBEAT_IP         192.100.112.184
  NETWORK_INTERFACE      eth1
  NETWORK_INTERFACE      eth2
 
HEARTBEAT_INTERVAL       1000000
NODE_TIMEOUT             5000000
 
AUTO_START_TIMEOUT       600000000
NETWORK_POLLING_INTERVAL 2000000
 
MAX_CONFIGURED_PACKAGES  4

Package Configuration File for pkg01

This section shows the package configuration file (pkg1.conf) for the package pkg01 in this sample configuration. The comments are not shown.

PACKAGE_NAME               pkg01
PACKAGE_TYPE               FAILOVER
FAILOVER_POLICY            CONFIGURED_NODE
FAILBACK_POLICY            MANUAL
NODE_NAME                  thyme
NODE_NAME                  basil
NODE_NAME                  sage
AUTO_RUN                   YES
NODE_FAIL_FAST_ENABLED     NO
RUN_SCRIPT                 /usr/local/cmcluster/pkg1/pkg1.cntl
RUN_SCRIPT_TIMEOUT         NO_TIMEOUT
HALT_SCRIPT                /usr/local/cmcluster/pgk1/pkg1.cntl
HALT_SCRIPT_TIMEOUT        NO_TIMEOUT
SERVICE_NAME               nfs1.monitor
SERVICE_FAIL_FAST_ENABLED  NO
SERVICE_HALT_TIMEOUT       300
SUBNET                     192.100.112.0

Package Control Script for pkg01

This section shows the package control script (pkg1.cntl) for the package pkg01 in this sample configuration. Only the user-configured part of the script is shown; the executable part of the script and most of the comments have been omitted.

PATH=/sbin:/usr/bin:/usr/sbin:/etc:/bin:usr/local/
cmcluster/bin
VGCHANGE="vgchange -a y"                # Default
VG[0]="nfsu01"
LV[0]=/dev/nfsu01/lvol1; 
FS[0]=/hanfs/nfsu011; 
FS_TYPE[0]="ext2"; 
FS_MOUNT_OPT[0]="-o rw"
# FS_UMOUNT_COUNT=""
# FS_MOUNT_RETRY_COUNT=""
IP[0]="192.100.112.243"
SUBNET[0]="192.100.112.0"
HA_APP_SERVER="pre-IP"
#SERVICE_NAME[0]=""
#SERVICE_CMD[0]=""
#SERVICE_RESTART[0]=""

NFS Toolkit Configuration File for pkg01

This section shows the NFS Toolkit configuration file (hanfs.conf) for the package pkg01 on this sample configuration:

XFS[0]="-o rw *:/hanfs/nfsu011"
NFS_SERVICE_NAME[0]="nfs1.monitor"
NFS_SERVICE_CMD[0]="/usr/local/cmcluster/pkg1/nfs.mon"
NFS_SERVICE_RESTART[0]="-r 0"

QUOTA_MON=YES

LOCK_MIGRATION=NO

Package Configuration File for pkg02

This section shows the package configuration file (pkg2.conf) for the package pkg02 in this sample configuration. The comments are not shown.

PACKAGE_NAME               pkg02
PACKAGE_TYPE               FAILOVER
FAILOVER_POLICY            CONFIGURED_NODE
FAILBACK_POLICY            MANUAL
NODE_NAME                  thyme
NODE_NAME                  sage
NODE_NAME                  basil
AUTO_RUN                   YES
NODE_FAIL_FAST_ENABLED     NO
RUN_SCRIPT                 /usr/local/cmcluster/pkg2/pkg2.cntl
RUN_SCRIPT_TIMEOUT         NO_TIMEOUT
HALT_SCRIPT                /usr/local/cmcluster/pgk2/pkg2.cntl
HALT_SCRIPT_TIMEOUT        NO_TIMEOUT
SERVICE_NAME               nfs2.monitor
SERVICE_FAIL_FAST_ENABLED  NO
SERVICE_HALT_TIMEOUT       300
SUBNET                     192.100.112.0

Package Control Script for pkg02

This section shows the package control script (pkg2.cntl) for the package pkg02 in this sample configuration. Only the user-configured part of the script is shown; the executable part of the script and most of the comments have been omitted.

PATH=/sbin:/usr/bin:/usr/sbin:/etc:/bin:usr/local/
cmcluster/bin
VGCHANGE="vgchange -a y"                # Default
VG[0]="nfsu02"
LV[0]=/dev/nfsu02/lvol1; 
FS[0]=/hanfs/nfsu021; 
FS_TYPE[0]="ext2"; 
FS_MOUNT_OPT[0]="-o rw"
# FS_UMOUNT_COUNT=""
# FS_MOUNT_RETRY_COUNT=""
IP[0]="192.100.112.244"
SUBNET[0]="192.100.112.0"
HA_APP_SERVER="pre-IP"
#SERVICE_NAME[0]=""
#SERVICE_CMD[0]=""
#SERVICE_RESTART[0]=""

NFS Control Script for pkg02

This section shows the NFS control script (hanfs.sh) for the package pkg02 on this sample configuration on the user-configured part of the script is shown:

XFS[0]="-o rw *:/hanfs/nfsu021"
NFS_SERVICE_NAME[0]="nfs2.monitor"
NFS_SERVICE_CMD[0]="/usr/local/cmcluster/pkg2/nfs.mon"
NFS_SERVICE_RESTART[0]="-r 0"