Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP Integrity Virtual Machines A.03.00: Release Notes > Chapter 2 Installation Notes

Installing Integrity VM

» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Index

This section describes information about installing the HP Integrity Virtual Machines product and associated software on the VM Host system.

HP Integrity Virtual Machines A.03.00 is installed on HP Integrity servers or nPartitions running HP-UX 11i V2 (September 2006 [0609] or later). For complete information about the requirements for installing Integrity VM, see the HP Integrity Virtual Machines Installation, Configuration, and Administration manual.

When you upgrade or reinstall Integrity VM, guests are stopped, but they are not removed. When the new version of Integrity VM starts, the virtual machines may also start, depending on the setting of the guest boot attribute.

Integrity VM Includes the Foundation Operating Environment

The HP-UX Foundation Operating Environment (FOE) is included with Integrity VM. Install the FOE on the VM Host on which you install Integrity VM. The license for the FOE (used in the VM Host only) is included with the purchase of Integrity VM. (Licenses for OEs that run inside the individual virtual machines must be purchased separately.)

For VM Hosts that will support guests as Serviceguard packages, the Mission Critical Operating Environment (MCOE) can also be used.

Upgrade HP WBEM Services

Integrity VM fails to install if the version of WBEM Services on your VM Host is old. The VM Host system must be running HP WBEM Services A.02.00.10 or later. The HP WBEM Services for HP-UX software bundle (B8465BA) is available as part of the HP-UX operating system, or download the software from www.hp.com. This version of HP WBEM Services is also required in order to install VM Provider and VM Manager.

Installing the hpvmmigrate Command

The hpvmmigrate command is included in the HP Integrity Virtual Machines product, but it is packaged in the separate VMMigrate bundle and must be explicitly specified. You must install the T2767AC bundle before or with the VMMigrate bundle, to make sure the versions of the bundles are compatible.

To install the VM Migrate bundle with the Integrity VM software, enter the following command:

# swinstall -x autoreboot=true -s my.server.foo.com:/depot/path T2767AC VMMigrate

Installing VM Provider

To install the VM Provider bundle with the Integrity VM software on the VM Host, enter the following command:

# swinstall -x autoreboot=true -s my.server.foo.com:/depot/path T2767AC VMProvider

To install the VM Provider bundle with the Integrity VM software on the HP-UX guest, enter the following command:

# swinstall -x autoreboot=true -s my.server.foo.com:/depot/path VMProvider

If you install the VM Provider on either the VM Host or a guest, make sure that the system is using HP WBEM Services A.02.00.10 or higher. For example:

# swlist WBEMServices
# Initializing...
# Contacting target "alien2"...
#
# Target:  alien2:/
#

# WBEMServices                            A.02.00.11     WBEM Services CORE
 Product
  WBEMServices.WBEM-CORE                  A.02.00.11     WBEM Services CORE
 Fileset for hp Integrity servers
  WBEMServices.WBEM-CORE-COM              A.02.00.11     WBEM Services COM
 Fileset for hp Integrity servers and hp 9000 servers
  WBEMServices.WBEM-MAN                   A.02.00.11     WBEM Services MAN
 Fileset
  WBEMServices.WBEM-MX                    A.02.00.11     WBEM Services MX
 fileset

Ugrade the VM Host to 0609 or Later

This version of Integrity VM does not run on HP-UX 11.23 versions released before September 2006 (0609). If the VM Host system is running an older versions of HP-UX 11.23, you must upgrade to 0609 or later before you upgrade to the current version of Integrity VM.

HP-UX Patches Required in the VM Host

Table 2-1 lists the patches that are required in the VM Host system running Integrity VM A.03.00 and later. For patches required for earlier versions of Integrity VM, consult the Release Notes document for that version.

Table 2-1 VM Host Patches

Affected HP-UX (VM Host) VersionAffected Integrity VM VersionFixDescription/ImpactComment
11.23 0512 or laterA.02.00 or laterPHNE_33724Bug FixFixes a problem of a panic on the VM Host.
11.23 0505 or later A.02.00 or laterPHNE_34474Bug FixRequired when using linkloop over VLANs between guest and VM Host VLAN.
11.23 0505A.01.00 or later

Cimserver 02.00.011

PHSS_34429
Bug FixResolves potential corruption of guest configuration, cimserver, or other WBEM files when under extreme load. Download HP WBEM Services for HP-UX Product Bundle B8465BA from the HP software depot.
11.23 0505 or later A.01.00 or laterPHNE_34278Bug FixResolves panic and system hang symptoms
11.23 0505 or later A.01.00 or laterPHNE_35182Bug FixCumulative ARPA transport patch, resolves panic. Requires prerequisite PHNE_33732
11.23 MontecitoA.01.20HPVM A.02.00 11.23.0609 HWEMontecito HW supportHPVM V2.0 is strongly recommended for use with Montecito-based systems.

 

Patches Required in the HP-UX Guest

Table 2-2 lists the patches that are required in HP-UX guests:

Table 2-2 HP-UX Guest Patches

Affected Guest OS and VersionAffected Integrity VM VersionFixDescription/ImpactComment
HP–UX 11.23 0505A.01.00 or laterU320 SCSI MPT driver version B.11.23.03, bundle A7173AIncludes fixes for performance and stability.MPT driver update. This patch is included in the 0512 update.
HP–UX 11.23 0505 or laterA.01.00 or laterPHKL_34278Bug fix Resolves panic and system hang symptoms.
HP–UX 11.23 0505 or laterA.01.00 or laterPHKL_34589Bug fixResolves panic on guest.
11.23 0606 or laterA.01.20 or laterPHKL_34540 PHKL_34336 PHKL_34928 Fix to allow sharing of idle CPU cycles between guests.Ensure loaded when using 0606 and later. Must be manually installed if feature 11i is not installed. Without this patch, Integrity VM may not detect guest is idle and not share resources, heavily impacting performance.
11.23 0505 or laterA.01.00 or laterPHKL_33823Bug FixResolves panic on guest.
11.23 0505 or laterA.02.00 or later

PHSS_34760

Serviceguard Monitor fixRequired for running in Serviceguard 11.16 environment.
11.23 0505 or laterA.02.00 or later

PHSS_34337

Serviceguard Monitor fixRequired for running in Serviceguard 11.17 environment.
11.23 0505 or laterA.01.00 or laterCimserver 02.00.09 (PHSS_34429)Bug fixResolves potential corruption of guest configuration, cimserver, or other WBEM Services files when under extreme load.
11.23 0505 or laterA.01.00 or laterPHNE_35182Bug fixCumulative ARPA transport patch, resolves panic. Requires prerequisite PHNE_33732
11.23 MontecitoA.01.20 or laterHPVM A.02.00 11.23.0609 HWEMontecito hardware supportIntegrity VM V2.0 or later is strongly recommended for use with Montecito-based systems.

 

For more information about updates to HP-UX software, contact your HP representative or support specialist.

Table 2-3 lists patches and products that you should not install on HP-UX guests. In guests where these patches are installed, degradations and regressions have been observed.

Table 2-3 Do Not Install Products or Patches on HP-UX Guests

Affected Guest OS and VersionAffected Integrity VM VersionFixDescription/ImpactComment
HP–UX 11.23 0505 or laterA.01.00A.01.20PHKL_33361Cumulative kernel SCSI patchResolved in Integrity VM A.02.00 and later.
HP–UX 11.23 0505 or laterA.01.00A.01.20A.02.00PHKL_35739VxVM 4.1 Kernel Patch 04Resolved in Integrity VM A.03.00 and later.

 

Patches Required for Ignite/UX Servers

Table 2-4 lists the patches that are required in the guests:

Table 2-4 Ignite/UX Patches

Affected OS and VersionAffected Integrity VM VersionFixDescription/ImpactComment
HP–UX 11.00A.01.00 or laterPHKL_25355tftpd 
HP–UX 11.11A.01.00 or laterPHKL_32825tftpd 

 

Patches Required for Windows Guests

Table 2-5 lists the patches that are required in the guests.

Table 2-5 Windows Patches

Affected Guest OS and VersionAffected Integrity VM VersionFixDescription/ImpactComment
Windows Server 2003A.02.00 or laterSSM 4.6Bug Fix`Microsoft patches correct a compiler issue that can affect Windows guests in various ways.

 

Table 2-6 lists patches and products that you should not install on Windows guests.

Table 2-6 Do Not Install Products or Patches on Windows Guests

Affected Guest OS and VersionAffected Integrity VM VersionFixDescription/ImpactComment
SSM 4.5

SSM 4.6

Montecito

A.02.00 or laterPalHaltLightRegEdit componentIdle detectionSee Section : “Running Windows Guests on a Dual Core Intel Itanium2 Processor (Montecito) System”

 

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2007 Hewlett-Packard Development Company, L.P.