 |
» |
|
|
|
|  | |
zx25d 300 X.25 initialization
failure; zinit failed with error <#>! - Explanation:
The ZCOM API routine zinit has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ACC X.25 subsystem. The X.25 subsystem will not be usable
until this error is corrected. - Action:
Examine the specific reason for the failure and
take corrective action as necessary. If the problem persists and
you are unable to correct the problem or the error indicates an
internal failure, contact your HP support representative.
zx25d 301 X.25 initialization
failure; zopen failed with error <#>! - Explanation:
The ZCOM API routine zopen has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ACC X.25 subsystem. The X.25 subsystem will not be usable
until this error is corrected. - Action:
Examine the specific reason for the failure and
take corrective action as necessary. If the problem persists and
you are unable to correct the problem or the error indicates an
internal failure, contact your HP support representative.
zx25d 302 X.25 initialization
failure; zsetkfunc failed with error <#>! - Explanation:
The ZCOM API routine zsetkfunc has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ACC X.25 subsystem. The X.25 subsystem will not be usable
until this error is corrected. - Action:
Examine the specific reason for the failure and
take corrective action as necessary. If the problem persists and
you are unable to correct the problem or the error indicates an
internal failure, contact your HP support representative.
zx25d 303 X.25 initialization
failure; zevent_rcvr failed with error <#>! - Explanation:
The ZCOM API routine zevent_rcvr has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ACC X.25 subsystem. The X.25 subsystem will not be usable
until this error is corrected. - Action:
Examine the specific reason for failure and take corrective
action as necessary. If the problem persists and you are unable
to correct the problem or the error indicates an internal failure,
contact your HP support representative.
zx25d 304 Too many
errors; ACC X.25 subsystem is unusable! - Explanation:
The ZCOM API routine zread has
unexpectedly failed three consecutive times in a row. Each failure
will have logged a separate error message indicating the specific reason
for the failure. These messages should appear immediately prior
to this message in the ZCOM log file. The zread routine
is used to retrieve all user application requests and X.25 protocol
events. Since the X.25 protocol driver is unable to retrieve critical data
and status messages, the X.25 subsystem has been shutdown. The X.25
subsystem will not be usable until this error is corrected. - Action:
Examine the specific reason for failure and take corrective
action as necessary. If the problem persists and you are unable
to correct the problem or the error indicates an internal failure,
contact your HP support representative.
zx25d 305 Infinite
loop detected in the PTT group linkage! The X.25 link ZLU <#> will
not be usable. - Explanation:
While scanning the Physical Terminal Table for all Virtual
Circuit ZLUs associated with the indicated X.25 link ZLU, the X.25
Protocol driver detected that it had gone into an infinite loop
due to a corrupt PTT group linkage word. This could only occur as
a result of an internal defect. Since the X.25 protocol driver was unable
to find all of the ZLUs associated with the X.25 link, the link
has been marked as unusable. - Action:
This is an internal defect in the ZCOM product. Contact
your HP support representative.
zx25d 306 ACC X.25
subsystem initialization failure; zsetql() on ZLU <#> failed
with error <#>! - Explanation:
The ZCOM API routine zsetql has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ACC X.25 subsystem. The X.25 subsystem will not be usable
until this error is corrected. - Action:
Examine the specific reason for the failure and
take corrective action as necessary. If you are unable to correct
the problem and the error indicates an internal failure, contact
your HP support representative.
|
Printable version
