zisdn 1022 ISDN:
ACC initialization failure: zinit failed with error <#>! The
ACC ISDN subsystem can not be used.
- Explanation:
The ZCOM API routine zinit has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ISDN/ACC subsystem. The ISDN/ACC subsystem will not be usable
until this error is corrected.
- Action:
Look for the error number in Chapter 2 “ZCOM Error Codes” and
take corrective action as necessary. If the problem persists and
you are unable to correct the problem or the error indicates an
internal failure, contact your HP support representative.
zisdn 1023 ISDN:
ACC initialization failure: zopen failed with error <#>!
The ACC ISDN subsystem can not be used.
- Explanation:
The ZCOM API routine zopen has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ISDN/ACC subsystem. The ISDN/ACC subsystem will not be usable
until this error is corrected.
- Action:
Look for the error number in Chapter 2 “ZCOM Error Codes” and
take corrective action as necessary. If the problem persists and
you are unable to correct the problem or the error indicates an
internal failure, contact your HP support representative.
zisdn 1024 ISDN:
ACC initialization failure: zsetql on ZLU <#> failed with
error <#>! The ACC ISDN subsystem is unusable!
- Explanation:
The ZCOM API routine zsetql has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ISDN/ACC subsystem. The ISDN/ACC subsystem will not be usable
until this error is corrected.
- Action:
Look for the error number in Chapter 2 “ZCOM Error Codes” and
take corrective action as necessary. If the problem persists and
you are unable to correct the problem or the error indicates an
internal failure, contact your HP support representative.
zisdn 1025 ISDN:
ACC initialization failure: zname failed with error <#>!
The ACC ISDN subsystem is unusable!
- Explanation:
The ZCOM API routine zname has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ISDN/ACC subsystem. The ISDN/ACC subsystem will not be usable
until this error is corrected.
- Action:
Look for the error number in the ZCOM Error Codes chapter of the ACC Error Guide and
take corrective action as necessary. If the problem persists and
you are unable to correct the problem or the error indicates an internal
failure, contact your HP support representative.
zisdn 1026 ISDN:
ACC initialization failure: zsetfunc failed with error <#>!
The ACC ISDN subsystem can not be used.
- Explanation:
The ZCOM API routine zsetfunc has
unexpectedly failed due to the indicated ZCOM error during the initialization
of the ISDN/ACC subsystem. The ISDN/ACC subsystem will not be usable
until this error is corrected.
- Action:
Look for the error number in Chapter 2 “ZCOM Error Codes”
and take corrective action
as necessary. If the problem persists and you are unable to correct
the problem or the error indicates an internal failure, contact
your HP support representative.
Printable version
