 |
» |
|
|
|
|  | |
zisdn 2076 ISDN:
zread on ZLU <#> has unexpectedly failed with error <#>. - Explanation:
The zread call failed with error. - Action:
Check the system error returned by the N2z_connect_req
call and correct the problem. If you are unable to resolve the problem,
contact your HP representative.
zisdn 2077 ISDN:
The N2Z driver has rejected the request to place an outbound call
on a SVC with system errno <#>. - Explanation:
N2z_connect_req call failed with error. - Action:
Check the system error returned by the N2z_connect_req
call and correct the problem. If you are unable to resolve the problem,
contact your HP representative.
zisdn 2078 ISDN:
zsend has unexpectedly failed with error <#>.
The message type was <#>. - Explanation:
The zsend call failed with error. - Action:
Check the error returned by the zread call against those
listed in Chapter 2 “ZCOM Error Codes” and correct the problem. If
you are unable to resolve the problem, contact your HP representative.
zisdn 2079 ISDN:
This ISDN group link <#> is already configured! - Explanation:
The ISDN group link is already configured. - Action:
Check and correct your application to configure
the correct group link. Look for duplicates in the x25prof file. If you are unable to
resolve the problem, contact your HP representative.
zisdn 2080 ISDN:
Unable to configure ISDN group <#>. The ISDN subsystem
is not running! - Explanation:
The ISDN/ACC subsystem is not running. - Action:
Start the ISDN/ACC subsystem first, then configure the
group link. If you are unable to resolve the problem, contact your
HP representative.
|
Printable version
