The sample network configuration file (ttgen configuration
file) supplied with the product is shown below. The file
is installed in /opt/acc/cfg/x25an_sample.answ when swinstall is run.
#include "/opt/acc/cfg/ttgendefine"
ttgen
Configuration
System-name "ACC X.25 analyzer example ttgen input file"
Program-Zlu 100
Terminal-zlu 800
Logical-Term 700
Physical-Term 700
Buffer-Pool 3000000
Logical-size 252
Logical-data 10 X25CNT,0,X25CNT_LDSIZE
Logical-data 99 X25UDT,0,20
Queue-Limit 500
Transmit-Limit 200
Unack-Limit 5000
Port-Limit 20000
E1T1-Port-Limit 100000
Node-Entry 1
Interface-Definition
* mx# bus#:slot#
z7200a 0 0:4 /opt/acc/z7200a/x25.zabs
Port-Definition
Port 00:00 RS232 57600 Int SDLC x1 NRZ
Port 00:01 RS232 57600 Ext SDLC x1 NRZ
Port 00:02 RS232 57600 Ext SDLC x1 NRZ
Port 00:03 RS232 57600 Ext SDLC x1 NRZ
Port 00:04 RS232 57600 Ext SDLC x1 NRZ
Port 00:05 RS232 57600 Ext SDLC x1 NRZ
Port 00:06 RS232 57600 Ext SDLC x1 NRZ
Port 00:07 RS232 57600 Ext SDLC x1 NRZ
Terminal-Definition
Term 0017 0:0 X25.LAPB 0009H 43EAH 10 0 0 0 0 "Level.2 DCE"
option 30h
* no_autostart
last_pvc 0
first_insvc 0
last_insvc 0
first_svc 1
last_svc 3
first_outsvc 0
last_outsvc 0
def_inpacket 8
def_outpacket 8
Term 0500 0:0 x25.svc.io 0000h 0000h 99 0 0 0 0 "Level.3 SVC in"
Repeat 2
Term 0018 0:1 X25.LAPB 8009H 43EAH 10 0 0 0 0 "Level.2 DTE"
option 30h
* no_autostart
last_pvc 0
first_insvc 0
last_insvc 0
first_svc 1
last_svc 3
first_outsvc 0
last_outsvc 0
def_inpacket 8
def_outpacket 8
Term 0531 0:1 x25.svc.io 0000h 0000h 99 0 0 0 0 "Level.3 SVC out"
Repeat 2
Term 0019 0:2 HDLC.FRAME 0 0 90 20 1 0 0 "Protocol Analyzer"
Term 0020 0:3 HDLC.FRAME 0 0 90 19 2 0 0 "Protocol Analyzer"
Term 0021 0:4 HDLC.FRAME 0 0 90 22 1 0 0 "Protocol Analyzer"
Term 0022 0:5 HDLC.FRAME 0 0 90 21 2 0 0 "Protocol Analyzer"
Term 0023 0:6 HDLC.FRAME 0 0 90 24 1 0 0 "Protocol Analyzer"
Term 0024 0:7 HDLC.FRAME 0 0 90 23 2 0 0 "Protocol Analyzer"
Node-Definition
Local-Node 123
End$