run

Specify the capture file. If not given it will be defaulted to /var/opt/acc/log/anz_ZLU.eve where ZLU is the number specified in the command.

Specify the maximum size of the capture file. If not given, a default size of 1Mbyte will be used. Once this file size is reached, the capture halts.

Set the display options (refer to the options command for details of option setting). Note the option settings modified in this command will change the default options for the next display command. These options only have an immediate effect if the follow option is used.

Set follow mode. In this mode the capture is started and then the program goes into display mode, displaying the data as it is stored into the capture file. The display mode uses the previously defined options plus any modifications in a -o option within this command.

Specify LCN masking for events to be stored into the capture file. If no LCN masking is given then all X.25 L2 and L3 traffic is stored into the file. If masking is specified then only L3 traffic with matching LCN numbers is stored. A maximum of 6 LCN numbers may be specified.

Specify level 2 or level 3 protocol for analysis and trace display. See the protocol command for specific details on format for option -p.