Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
 X.25/ACC Installation and Configuration Guide

Index
» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Index

spacerspacerspacer
spacer
spacer
  		   

Symbols

.answ
configuration files, TTGEN .answ File
/etc/rc.config.d/acc file
starting X.25/ACC automatically, X.25/ACC and x25init Auto-Start at Boot-up
4-Channel
compared to other interfaces, 4-Channel X.25/ACC Compared Against Other ACC Interfaces
<$endrange>/opt/acc/bin/make_n2z/x25init
configuration files created, /opt/acc/bin/make_n2z_x25init
<$endrange>/opt/acc/lbin/acc_bld_lpbk
produce a sample loopback ttgen configuration file, /opt/acc/lbin/acc_bld_lpbk
<$endrange>ACC
port configuration, MUX Port Configuration
<$endrange>Configuration
files
x25init, x25init Configuration Files
parameters, Configuration Parameters
sample TTGEN file, Configuration Scripts
x25init, x25init Configuration Summary
ZCOM
port-definition, Encode Mode - Z7300A 4-Port T1/E1 Interface Only
<$endrange>Disaster Conditions
error messages relating to, Action:
<$endrange>Errors
disaster messages from nli2zcom driver, Action:
error messages from nli2zcom driver, Action:, Action:, Action:
NLI2ZCOM driver messages, CLASS: Protocol Information 5000-5999
protocol information from nli2zcom driver, Action:
resource limitations messages from nli2zcom driver, Action:
warning messages from nli2zcom driver, Action:
<$endrange>Files
configuration
x25init, x25init Configuration Files
sample TTGEN configuration file, Configuration Scripts
TTGEN Configuration File
parameters, Configuration Parameters
x25init Configuration
parameters defined, x25init Configuration Summary
<$endrange>Hardware
adding after installation, Adding or Moving Hardware After Installation
moving after installation, Important Installation and Configuration Notes
overview of, ACC Hardware Components
<$endrange>Installation
software
how-to, Software Installation
important notes about, Software Installation and Verification
removing old software, Software Removal
verifying, Performing Loopback Test
<$endrange>Kernel
zcom_mem_size and, zcom_mem_size
<$endrange>Loopback
/opt/acc/bin/make_n2z/x25init and, /opt/acc/bin/make_n2z_x25init
loopback mode
example of in a Service Guard clustered environment, ACC Service Guard Configuration Notes
producing a sample ttgen configuration file, /opt/acc/lbin/acc_bld_lpbk
verifying the installation, Performing Loopback Test
<$endrange>Memory
zcom_mem_size and, zcom_mem_size
<$endrange>MUX
adding after installation, Adding or Moving Hardware After Installation
moving after installation, Important Installation and Configuration Notes
port configuration, MUX Port Configuration
<$endrange>nli2zcom Driver
errors
disasters, Action:
errors, Action:, Action:, Action:
protocol information, Action:
resource limitations, Action:
warning, Action:
<$endrange>Ordering
hardware
discontinued options, ACC Hardware Components
ordering options, ACC Hardware Components
<$endrange>Parameter
Configuration, Configuration Parameters
<$endrange>Port
modifying configuration, MUX Port Configuration
<$endrange>Port Definition
ZCOM configuration, Encode Mode - Z7300A 4-Port T1/E1 Interface Only
<$endrange>Protocol Information
errors relating to, Action:
<$endrange>Resource Limitations
errors relating to, Action:
<$endrange>Scripts
/opt/acc/bin/make_n2z/x25init, /opt/acc/bin/make_n2z_x25init
/opt/acc/lbin/acc_bld_lpbk, /opt/acc/lbin/acc_bld_lpbk
<$endrange>Service Guard
notes on configuring ACC for, ACC Service Guard Configuration Notes
<$endrange>Shutdown
X.25/ACC, Shutting Down X.25/ACC
<$endrange>Software
installation
how-to, Software Installation
important notes about, Software Installation and Verification
removing old software, Software Removal
verifying, Performing Loopback Test
overview of, Software Overview
<$endrange>Startup
X.25/ACC, Starting Up X.25/ACC, X.25/ACC and x25init Auto-Start at Boot-up
<$endrange>swinstall
installling X.25/ACC Subsystem and, Hardware Considerations, Software Installation
<$endrange>TTGEN
parameters, Configuration Parameters
sample configuration file, Configuration Scripts
<$endrange>Tuning
zcom_mem_size parameter, zcom_mem_size
<$endrange>Warning Messages
errors relating to, Action:
<$endrange>X.25/9000
compared to X.25/ACC, Level 3 Parameters
port configuration, MUX Port Configuration
<$endrange>X.25/ACC
/opt/acc/bin/make_n2z/x25init script, /opt/acc/bin/make_n2z_x25init
/opt/acc/lbin/acc_bld_lpbk script, /opt/acc/lbin/acc_bld_lpbk
architecture of, Architecture Overview
compared to X.25/9000, Level 3 Parameters
prerequisites, Architecture Overview
sample TTGEN configuration file, Configuration Scripts
shutting down, Shutting Down X.25/ACC
starting automatically, X.25/ACC and x25init Auto-Start at Boot-up
zcom_mem_size parameter, zcom_mem_size
<$endrange>x25init
configuration files, x25init Configuration Files
<$endrange>ZCOM
configuration
port-definition, Encode Mode - Z7300A 4-Port T1/E1 Interface Only
<$endrange>zcom_mem_size
tuning the X.25/ACC subsystem, zcom_mem_size
<$endrange>zconfig()
example of (in loopback mode in Service Guard clustered environment), ACC Service Guard Configuration Notes
<$nopage>ACC
See also X.25/ACC, Introduction
<$nopage>X.25/ACC
See also ACC, Level 3 Parameters
<$startrange>/opt/acc/bin/make_n2z/x25init
configuration files created, /opt/acc/bin/make_n2z_x25init
<$startrange>/opt/acc/lbin/acc_bld_lpbk
produce a sample loopback ttgen configuration file, /opt/acc/lbin/acc_bld_lpbk
<$startrange>ACC
port configuration, MUX Port Configuration
<$startrange>Configuration
files
x25init, x25init Configuration Files
parameters, Configuration Parameters
sample TTGEN file, Sample X.25/ACC ttgen Configuration File
x25init, x25init Configuration Summary
ZCOM
port-definition, Port Definition Parameters
<$startrange>Disaster Conditions
error messages relating to, CLASS: Disasters 1000-1999
<$startrange>Errors
disaster messages from nli2zcom driver, CLASS: Disasters 1000-1999
error messages from nli2zcom driver, CLASS: Errors 2000-2999
NLI2ZCOM driver messages, NLI2ZCOM (N2Z) Driver Messages
protocol information from nli2zcom driver, CLASS: Protocol Information 5000-5999
resource limitations messages from nli2zcom driver, CLASS: Resource Limitations 4000-4999
warning messages from nli2zcom driver, CLASS: Warnings 3000-3999
<$startrange>Files
configuration
x25init, x25init Configuration Files
sample TTGEN configuration file, Sample X.25/ACC ttgen Configuration File
TTGEN Configuration File
parameters, Configuration Parameters
x25init Configuration
parameters defined, x25init Configuration Summary
<$startrange>Hardware
adding after installation, Adding or Moving Hardware After Installation
moving after installation, Adding or Moving Hardware After Installation
overview of, Hardware Overview
<$startrange>Installation
software
how-to, Software Installation
important notes about, Important Installation and Configuration Notes
removing old software, Software Removal
verifying, Installation Verification
<$startrange>Loopback
/opt/acc/bin/make_n2z/x25init and, /opt/acc/bin/make_n2z_x25init
loopback mode
example of in a Service Guard clustered environment, ACC Service Guard Configuration Notes
producing a sample ttgen configuration file, /opt/acc/lbin/acc_bld_lpbk
verifying the installation, Installation Verification
<$startrange>MUX
adding after installation, Adding or Moving Hardware After Installation
moving after installation, Adding or Moving Hardware After Installation
port configuration, MUX Port Configuration
<$startrange>nli2zcom Driver
errors
disasters, CLASS: Disasters 1000-1999
errors, CLASS: Errors 2000-2999
protocol information, CLASS: Protocol Information 5000-5999
resource limitations, CLASS: Resource Limitations 4000-4999
warning, CLASS: Warnings 3000-3999
<$startrange>Ordering
hardware
discontinued options, ACC Hardware Components
ordering options, ACC Hardware Components
<$startrange>Parameter
Configuration, Configuration Parameters
<$startrange>Port
modifying configuration, MUX Port Configuration
<$startrange>Port Definition
ZCOM configuration, Port Definition Parameters
<$startrange>Protocol Information
errors relating to, CLASS: Protocol Information 5000-5999
<$startrange>Resource Limitations
errors relating to, CLASS: Resource Limitations 4000-4999
<$startrange>Scripts
/opt/acc/bin/make_n2z/x25init, /opt/acc/bin/make_n2z_x25init
/opt/acc/lbin/acc_bld_lpbk, /opt/acc/lbin/acc_bld_lpbk
<$startrange>Service Guard
notes on configuring ACC for, ACC Service Guard Configuration Notes
<$startrange>Shutdown
X.25/ACC, Shutting Down X.25/ACC
<$startrange>Software
installation
how-to, Software Installation
important notes about, Important Installation and Configuration Notes
removing old software, Software Removal
verifying, Installation Verification
overview of, Software Overview
<$startrange>Startup
X.25/ACC, Introduction, X.25/ACC and x25init Auto-Start at Boot-up
<$startrange>swinstall
installling X.25/ACC Subsystem and, Introduction, Software Installation
<$startrange>TTGEN
parameters, Configuration Parameters
sample configuration file, Sample X.25/ACC ttgen Configuration File
<$startrange>Warning Messages
errors relating to, CLASS: Warnings 3000-3999
<$startrange>X.25/9000
compared to X.25/ACC, Configuring X.25/ACC vs. X.25/9000
port configuration, MUX Port Configuration
<$startrange>X.25/ACC
/opt/acc/bin/make_n2z/x25init script, /opt/acc/bin/make_n2z_x25init
/opt/acc/lbin/acc_bld_lpbk script, /opt/acc/lbin/acc_bld_lpbk
architecture of, Architecture Overview
compared to X.25/9000, Configuring X.25/ACC vs. X.25/9000
prerequisites, Architecture Overview
sample TTGEN configuration file, Sample X.25/ACC ttgen Configuration File
shutting down, Shutting Down X.25/ACC
starting automatically, X.25/ACC and x25init Auto-Start at Boot-up
<$startrange>x25init
configuration files, x25init Configuration Files
<$startrange>ZCOM
configuration
port-definition, Port Definition Parameters
<$startrange>zconfig()
example of (in loopback mode in Service Guard clustered environment), ACC Service Guard Configuration Notes

A

ACC
CCITT X.25 recommendations supported, Level 3 Parameters
defined, Introduction
load-sharing, Introduction
packet size supported, Level 3 Parameters
protocols supported, Introduction
redundant systems, Introduction
API
caveats, Architecture Overview

C

CCITT X.25
recommendations supported by ACC, Level 3 Parameters
Configuration
files
.answ, TTGEN .answ File
interface-definition, Interface Definition Parameters
node definition, Node Definition Parameters
subchannel definition, Subchannel Definition Parameters
terminal definition, Terminal Definition Parameters
TTGEN
file format, TTGEN Configuration File Format
overview, Introduction
ZCOM
TTGEN and, Using TTGEN

D

Daemons
X.25/9000, X.25/9000 Utilities and Daemons
zmasterd
shutting down X.25/ACC, Shutting Down X.25/ACC
zmasterd runs them, ZCOM Daemons
zmlog, ZCOM Daemons
zmon, ZCOM Daemons
zx25d_init, X.25 Specific Daemons
def_inpacketsize
x25init configuration parameter, x25init Configuration Summary
def_inthruput
x25init configuration parameter, x25init Configuration Summary
def_inwindow
x25init configuration parameter, x25init Configuration Summary
def_outpacketsize
x25init configuration parameter, x25init Configuration Summary
def_outthruput
x25init configuration parameter, x25init Configuration Summary
def_outwindow
x25init configuration parameter, x25init Configuration Summary
device
x25init configuration parameter, x25init Configuration Summary
Documentation
X.25/ACC Subsystem, Documentation
related, Related Documentation

E

EISA
moving card, Relocating the EISA Mux Card
Errors
error codes returned from X.25/ACC subroutines, ACC X.25 Subroutine Error Codes

F

fast_select_accept
x25init configuration parameter, x25init Configuration Summary
Files
/etc/rc.config.d/acc
starting X.25/ACC automatically, X.25/ACC and x25init Auto-Start at Boot-up
configuration
.answ, TTGEN .answ File
log
/var/adm/sw/swremove.log/, Log Files
/var/opt/acc/log/*.tlog, Log Files
TTGEN Configuration File
format, TTGEN Configuration File Format
overview, Introduction
X.25/9000
network configuration files, X.25/9000 Network Configuration Files
flow_control
x25init configuration parameter, x25init Configuration Summary

H

Hardware
components of X.25/ACC Subsystem, Hardware Components
installing X.25/ACC Subsytem, Hardware Considerations
ordering
discontinued options, ACC Hardware Components
ordering options, ACC Hardware Components
other X.25/9000 cards and, Using other X.25/9000 cards and ACC cards together
holdtimer
x25init configuration parameter, x25init Configuration Summary

I

idletimer
x25init configuration parameter, x25init Configuration Summary
Installation
hardware (ACC)
software and, Hardware Considerations
software
hardware (ACC) and, Hardware Considerations
identification, Software Identification
overview of process, Introduction
revisions (with zmntr utility), Software Identification
what utility, Software Identification
Interface Definition
Service Guard example, Examples
ZCOM configuration, Interface Definition Parameters
IP address
x25init configuration parameter, x25init Configuration Summary

K

Kernel
n2z_end_to_end_acks and, n2z_end_to_end_acks
n2z_hold_acks and, n2z_hold_acks
n2z_ignore_cts_cd and, n2z_ignore_cts_cd
n2z_link_timeout and, n2z_link_timeout
n2z_low_bnd_npkts and, n2z_low_bnd_npkts
n2z_max_cards and, n2z_max_cards
n2z_max_ninb_pkts and, n2z_max_ninb_pkts
n2z_max_zlu and, n2z_max_zlu
n2z_rr_policy and, n2z_rr_policy
n2z_t25_disable and, n2z_t25_disable
zcom_mem_size and, zcom_mem_size

L

l2window
x25init configuration parameter, x25init Configuration Summary
lci
x25init configuration parameter, x25init Configuration Summary
Load-Sharing
card-level or system-level, Introduction

M

Memory
generating an image file with TTGEN, Using TTGEN
n2z_max_ninb_pkts and, n2z_max_ninb_pkts
n2z_max_zlu and, n2z_max_zlu
zcom_mem_size and, zcom_mem_size
mtu
x25init configuration parameter, x25init Configuration Summary
MUX
installing X.25/ACC Subsytem, Hardware Considerations
moving EISA, Relocating the EISA Mux Card
other X.25/9000 cards and, Using other X.25/9000 cards and ACC cards together

N

n1
x25init configuration parameter, Level 2 Parameters
n2
x25init configuration parameter, Level 2 Parameters, x25init Configuration Summary
n2z_end_to_end_acks
tuning the X.25/ACC subsystem, n2z_end_to_end_acks
n2z_hold_acks
tuning the X.25/ACC subsystem, n2z_hold_acks
n2z_ignore_cts_cd
tuning the X.25/ACC subsystem, n2z_ignore_cts_cd
n2z_link_timeout
tuning the X.25/ACC subsystem, n2z_link_timeout
n2z_log_rst_clrs
tuning the X.25/ACC subsystem, n2z_log_rst_clrs
n2z_low_bnd_npkts
tuning the X.25/ACC subsystem, n2z_low_bnd_npkts
n2z_max_cards
tuning the X.25/ACC subsystem, n2z_max_cards
n2z_max_ninb_pkts
tuning the X.25/ACC subsystem, n2z_max_ninb_pkts
n2z_max_zlu
tuning the X.25/ACC subsystem, n2z_max_zlu
n2z_rr_policy
tuning the X.25/ACC subsystem, n2z_rr_policy
n2z_t25_disable
tuning the X.25/ACC subsystem, n2z_t25_disable
name
x25init configuration parameter, x25init Configuration Summary
neg_inpacketsize
x25init configuration parameter, x25init Configuration Summary
neg_inthruputclass
x25init configuration parameter, x25init Configuration Summary
neg_inwindow
x25init configuration parameter, x25init Configuration Summary
neg_outpacketsize
x25init configuration parameter, x25init Configuration Summary
neg_outthruputclass
x25init configuration parameter, x25init Configuration Summary
neg_outwindow
x25init configuration parameter, x25init Configuration Summary
networktype
x25init configuration parameter, x25init Configuration Summary
Node Definition
Service Guard example, Examples
ZCOM configuration, Node Definition Parameters

P

Packet
sizes supported, Level 3 Parameters
Port Definition
Service Guard example, Examples
Programmatic Interface
See API, Architecture Overview
pvc_inpacketsize
x25init configuration parameter, x25init Configuration Summary
pvc_inwindow
x25init configuration parameter, x25init Configuration Summary
pvc_outpacketsize
x25init configuration parameter, x25init Configuration Summary
pvc_outwindow
x25init configuration parameter, x25init Configuration Summary

R

Redundant system
card-level or system-level, Introduction
reverse_charge_accept
x25init configuration parameter, x25init Configuration Summary

S

Software
components of X.25/ACC Subsystem, Software Components
installation
hardware (ACC) and, Hardware Considerations
identifcation, Software Identification
overview of process, Introduction
revisions (with zmntr utility), Software Identification
swinstall, Introduction
what utility, Software Identification
Subchannel Definition
ZCOM configuration, Subchannel Definition Parameters
Subroutines
specific to X.25/ACC, ACC X.25 Subroutine Error Codes
X.25/ACC
error codes of, ACC X.25 Subroutine Error Codes

T

t1
x25init configuration parameter, Level 2 Parameters, x25init Configuration Summary
t2
x25init configuration parameter, Level 2 Parameters, x25init Configuration Summary
t3
x25init configuration parameter, Level 2 Parameters, x25init Configuration Summary
Terminal Definition
Service Guard example, Examples
ZCOM configuration, Terminal Definition Parameters
thruputclass
x25init configuration parameter, x25init Configuration Summary
TTGEN
configuring ZCOM MUX Subsystem, Using TTGEN
format of configuration file, TTGEN Configuration File Format
overview of configuration, Introduction
zcom utility, ZCOM Utilities
Tuning
n2z_end_to_end_acks parameter, n2z_end_to_end_acks
n2z_hold_acks parameter, n2z_hold_acks
n2z_ignore_cts_cd parameter, n2z_ignore_cts_cd
n2z_link_timeout parameter, n2z_link_timeout
n2z_log_rst_clrs parameter, n2z_log_rst_clrs
n2z_low_bnd_npkts parameter, n2z_low_bnd_npkts
n2z_max_cards parameter, n2z_max_cards
n2z_max_ninb_pkts parameter, n2z_max_ninb_pkts
n2z_max_zlu parameter, n2z_max_zlu
n2z_rr_policy parameter, n2z_rr_policy
n2z_t25_disable parameter, n2z_t25_disable
zcom_mem_size parameter, zcom_mem_size

U

Utilities
X.25/9000, X.25/9000 Utilities and Daemons
zcom
ttgen, ZCOM Utilities
zmntr, ZCOM Utilities

W

what
identifying software after installation, Software Identification

X

X.121_packet
x25init configuration parameter, x25init Configuration Summary
X.25/9000
compared to X.25/ACC, X.25/ACC plus HP X.25/9000 Streams Product
deamons, X.25/9000 Utilities and Daemons
network configuration files, X.25/9000 Network Configuration Files
See also X.25/ACC Subsystem, Introduction
utilities, X.25/9000 Utilities and Daemons
X.25/ACC
4-channel compared to other interfaces, 4-Channel X.25/ACC Compared Against Other ACC Interfaces
CCITT standards, Level 3 Parameters
compared to X.25/9000, X.25/ACC plus HP X.25/9000 Streams Product
described in this manual, Introduction
documentation, Documentation
related, Related Documentation
features, Features
hardware components, Hardware Components
n2z_end_to_end_acks parameter, n2z_end_to_end_acks
n2z_hold_acks parameter, n2z_hold_acks
n2z_ignore_cts_cd parameter, n2z_ignore_cts_cd
n2z_link_timeout parameter, n2z_link_timeout
n2z_log_rst_clrs parameter, n2z_log_rst_clrs
n2z_low_bnd_npkts parameter, n2z_low_bnd_npkts
n2z_max_cards parameter, n2z_max_cards
n2z_max_ninb_pkts parameter, n2z_max_ninb_pkts
n2z_max_zlu parameter, n2z_max_zlu
n2z_rr_policy parameter, n2z_rr_policy
n2z_t25_disable parameter, n2z_t25_disable
packet size, Level 3 Parameters
software components, Software Components
subroutines
error codes, ACC X.25 Subroutine Error Codes
specific to, ACC X.25 Subroutine Error Codes
zcom utilities
ttgen, ZCOM Utilities
zmntr, ZCOM Utilities
zcom_mem_size parameter, zcom_mem_size
zx25d_init daemon, X.25 Specific Daemons
X121
x25init configuration parameter, x25init Configuration Summary
x25init
parameters
def_inpacketsize, x25init Configuration Summary
def_inthruput, x25init Configuration Summary
def_inwindow, x25init Configuration Summary
def_outpacketsize, x25init Configuration Summary
def_outthruput, x25init Configuration Summary
def_outwindow, x25init Configuration Summary
device, x25init Configuration Summary
fast_select_accept, x25init Configuration Summary
flow_control, x25init Configuration Summary
holdtimer, x25init Configuration Summary
idletimer, x25init Configuration Summary
IPaddress, x25init Configuration Summary
l2window, x25init Configuration Summary
lci, x25init Configuration Summary
Level 3, Level 3 Parameters
mtu, x25init Configuration Summary
n1, Level 2 Parameters
n2, Level 2 Parameters, x25init Configuration Summary
name, x25init Configuration Summary
neg_inpacketsize, x25init Configuration Summary
neg_inthruputclass, x25init Configuration Summary
neg_inwindow, x25init Configuration Summary
neg_outpacketsize, x25init Configuration Summary
neg_outwindow, x25init Configuration Summary
net_outthruputclass, x25init Configuration Summary
networktype, x25init Configuration Summary
pvc_inpacketsize, x25init Configuration Summary
pvc_inwindow, x25init Configuration Summary
pvc_outpacketsize, x25init Configuration Summary
pvc_outwindow, x25init Configuration Summary
reverse_charge_accept, x25init Configuration Summary
t1, Level 2 Parameters, x25init Configuration Summary
t2, Level 2 Parameters, x25init Configuration Summary
t3, Level 2 Parameters, x25init Configuration Summary
thruputclass, x25init Configuration Summary
X.121, x25init Configuration Summary
X121_packet, x25init Configuration Summary
starting automatically at system reboot, X.25/ACC and x25init Auto-Start at Boot-up

Z

ZCOM
configuration
interface-definition, Interface Definition Parameters
node-definition, Node Definition Parameters
overview of, Introduction
subchannel-definition, Subchannel Definition Parameters
terminal-definition, Terminal Definition Parameters
TTGEN Configuration file format, TTGEN Configuration File Format
TTGEN parameters, Configuration Parameters
configuring
TTGEN, Using TTGEN
utilities
ttgen, ZCOM Utilities
zmntr, ZCOM Utilities
zcom_mem_size
tuning the X.25/ACC subsystem<$startrange>, zcom_mem_size
ZLU
n2z_max_zlu parameter, n2z_max_zlu
zmasterd
shutting down X.25/ACC, Shutting Down X.25/ACC
starting the zx25d_init, X.25 Specific Daemons
starting zmlog, ZCOM Daemons
starting zmon, ZCOM Daemons
starts daemons, ZCOM Daemons
zmlog
process diagnostic messages, ZCOM Daemons
zmntr
revisions and, Software Identification
zcom utility, ZCOM Utilities
zmon
manages ZCOM subsystem, ZCOM Daemons
zx25d_init
initializing the X.25/ACC subsystem, X.25 Specific Daemons


Examples
  		 
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2000 Hewlett-Packard Development Company, L.P.