Installing the X.25 Streams software

To upgrade your software to X.25 Streams:

For SNAplus and OTS users only—Remove these products from your system as described in Chapter 2 “Preparing to upgrade your system”
All users—Use the swinstall utility to select and install the appropriate software from the HP-UX Application CD-ROM. For X.25/ACC software, follow the instructions in Chapter 2 of the X.25/ACC Installation and Configuration Guide.
For SNAplus and OTS users only—Re-install your OTS or SNAplus product with swinstall.

Verifying X.25/9000 installation

Driver revision

The driver is composed of 3 filesets. You can verify that these filesets are on your system with the command:

what /stand/vmunix | grep SX25

which should return:

   FILESET SX25-COM (11.0) $Revision: #.#
   FILESET SX25-IP (11.0) $Revision:  #.#
   FILESET SX25-PA (11.0) $Revision:  #.#

PAD Services revision

You can verify that you have installed the right software (X.25 PAD Services revision 10.15 or later) with:

what /usr/sbin/x29server

which should return:

X.25 PAD Services $Revision: ##.##

Once you have verified the presence of the required filesets you can presume that the software is correctly installed on your system. Proceed to the next section.

Verifying X.25 ACC installation

You can verify that the ACC software is installed by entering the command:

swlist

which should return:

Z7476AA B.03.01.00 X.25/9000 and ACC Bundle

Installing the X.25 Streams software

Technical documentation

» Table of Contents

» Index

Verifying X.25/9000 installation

Driver revision

PAD Services revision

Verifying X.25 ACC installation