The HDLC/LAP-B (ABM) Protocol product provides a pre-loaded firmware
file that can be used directly in the ACC network configuration files.
The HDLC/LAP-B (ABM) protocol may also be used on the same
ACC Multiplexer as other protocols. If this is the case, a new firmware download
(.zabs) file can be built to contain all of the protocols that
will be used on that Mux card. This product provides the relocatable firmware
files and a sample Link command (.zlnk) file for use in this case.
The files provided with the HDLC/ABM product are listed in
the following table.
Table 1-1 Provided Files
Downloadable | |
/opt/acc/<card-type>/hdlc.zabs | This is a linked file that contains the (*.zrel)
relocatables. It can be referenced directly from the network configuration
file. |
Relocatable Firmware
Files | |
For the 2-channel and 8-channel (EISA
and HP-PB only) ACC cards, the relocatable firmware file provided
is: |
/opt/acc/protocol/hdlcabm.zrel | Implements the Link Access Procedure (Balanced)
protocol and interfaces the LAP-B link-level code to the application
program set as receiver for the LAP-B point-to-point ZLU. |
Other Files | |
/opt/acc/<card-type>/hdlc.zlnk | This link file is used by the zlink program to create the hdlc.zabs file. |
/opt/acc/cfg/lapb_sample.answ | This is a sample network configuration file. |
Printable version
