Using the X.25 Protocol Module

The Multi-protocol ACC Installation and Configuration Guide contains the general procedure for creating downloadable firmware files, creating the ttgen configuration file, starting up the ACC subsystem with the new protocol and new configuration. The X.25 specific requirements are noted below:

Include the zx25.zrel protocol module when creating the .zabs firmware file (non-PCI bus only).
Refer to the section “Configuration” in Chapter 3 “ZX25D X.25 Protocol Driver” for X.25 specific configuration requirements when building the ttgen configuration file.
The program zx25d_init must be scheduled in order to use the X.25 protocol. The installation procedure will configure the zmasterd_list file to automatically schedule this program when zmasterd is used to start up the ZCOM subsystem.

Using the X.25 Protocol Module

Technical documentation

» Table of Contents