Special ZMNTR X.25 Facilities

Refer to the separate ZMNTR (ZCOM monitor) documentation within the ACC Utilities Reference Guide for further information on the commands described below.

Information on how the commands can be used for X.25 may be obtained from within ZMNTR by entering:

??,MOD

ZMNTR has been enhanced to include facilities for the display of information specific to X.25. These facilities may be explicitly accessed by use of command modifiers. The modifiers are:

O - only terminals (including X.25 terminals)
V - Virtual circuits
L - Link terminals
X - Link terminal statistical counters (TT only)

These modifiers are specified as character additions to the original command. The order in which the modifiers are used is not important. For example: TTL,nn,mm is used to display all the X.25 links in the range specified. The commands for which these modifiers are available are:

SD,SU,RE,FL	- shutdown, startup, reissue, flush
TT	- terminal table
DC	- display configuration
PT	- port table

For example:

TTV,1,100	display all virtual circuits connected to
	terminals in the range 1 to 100
 
SDV,1,100	shutdown all virtual circuits connected to
	terminals in the range 1 to 100
 
DCO,1,100	display the configuration for the terminals
	only (not the virtual circuits or links) in
	the range 1 to 100.TTLV,1,100	display all links and virtual circuits
	for configured terminals

For further information on these commands refer to the separate ZMNTR (ZCOM monitor) documentation within the ACC Utilities Reference Guide.