Requirements and Supported Products

This page lists the Hewlett-Packard products currently supported by EMS hardware monitors. The page also identifies any patches or software required for using the EMS hardware monitor with the product.

Disk Arrays

Disk Products

Tape Products

High Availability Storage Systems

Fibre Channel SCSI Multiplexers

Fibre Channel Adapters

Fibre Channel Arbitrated Loop Hubs

Fibre Channel Switches

Memory

System

Interface Cards

Other

Disk Arrays

Product Model/Product
Number Special
Requirements

HP AutoRAID Disk Array
Supported by: AutoRAID Disk Array Monitor
12H
12 Requires the following ARMServer versions:
HP-UX 11.00 (Patch PHCO_23262)

HP-UX 11.11 (Patch PHCO_23263)

HP High Availability Disk Array
Supported by: High-Availability Disk Array Monitor
30/FC
20
10 None

HP Fast/Wide SCSI Disk Array
Supported by: Fast/Wide SCSI Disk Array Monitor
C243XHA None

HP Fibre Channel High Availability Disk Array (Model 60/FC)
Supported by: Disk Array FC60 Monitor
HP SureStore E Disk Array FC60

11.00 PHCO_26823

11.11 PHCO_26824

HP Storage Works Modular SAN array 1000

HP Storage Works Modular SAN array 30

Supported by: HP Storage Works Modular SAN array 1000/30 Monitor

HP Storage Works Modular SAN array 1000

HP Storage Works Modular SAN array 30
Starting with HP-UX 11i V2 March 2004 release of OnlineDiag, MSA 1000 is supported on the following cards:

A6795A (2 Gbps, 64-bit 66 MHz PCI)

A6826A (2 Gbps, 64-bit PCI Dual Channel)
Starting with HP-UX 11i June 2004 release and HP-UX 11i V2 September 2004 release of OnlineDiag, MSA 1000 is supported on the following cards :

A9782A (2 Gbps, 64-bit PCI Dual Channel combo)

A9784A (2 Gbps, 64-bit PCI Dual Channel combo)

Disk Products

Product Model/Product
Number Special
Requirements

All disks bound to the sdisk and disc30 drivers and not under the control of another event monitor (such as a disk array monitor).
Hitachi XP256, XP512, XP128, and XP1024 drives and EMC Symetrix drives are not supported, since these drives have their own monitoring.

Supported by: Disk Monitor
NA None

Tape Products
All the tape products in the following table are monitored by the SCSI Tape Devices Monitor.
IMPORTANT: The HP StorageWorks SDLT 160/320 GB Tape Drive and the HP Ultrium 460 External Tape Drive are not supported by the OnlineDiag product. Some STM tools may function, but again, these tools are not supported. The diagnostics tools and utilities that support these devices is HP StorageWorks Library and Tape Tools (L&TT). These tools can be downloaded free of charge at:
http://www.hp.com/support/tapetools

IMPORTANT: Users must disable this monitor during a backup. There is a chance that the EMS polling will interfere with the backup.

Note that support for many devices was added in the March 2000 (IPR 0003) and June 2000 (IPR 0006) release of STM.

Product Model/Product
Number Special
Requirements

DDS-2 Autoloader A3400A None

DDS-3 Autoloader A3716A None

DDS-4 Autoloader C6370A, C6371A Mar 00 Release

DLT4000 4/48 Library; HP-UX; Differential SCSI A3544A None

DLT4000 2/48 Library; HP-UX; Differential SCSI A3545A None

DLT4000 2/28 Library; HP-UX; Differential SCSI A3546A None

DLT 4000 & 7000; 2/28; Drives Differential; Robotics SE/Diff A4850A None

DLT 4000 & 7000; 4/48; Drives Differential; Robotics SE/Diff A4855A None

DLT 4000 & 7000; 15 slot; Deskside/Rack; Differential A4851A None

DLT 4000 & 7000; 588 slot; Drives Diff; Robotics SE A4845A None

DLT 4000 & 7000; 100 slot; Drives Diff; Robotics SE A4846A None

DLT 4000 & 7000; 30 slot; Differential A4853A None

DLT7000 8-slot Library A5501A Mar 00 Release

DLT8000 8-slot Library A1375A Mar 00 Release

DLT8000 20-slot Library A5583A, A5584A, A4680AZ, A4680AHP, A4681AHP Mar 00 Release

DLT8000 40-slot Library A5585A, A5586A, A4682AZ, A4682AHP, A4683AHP Mar 00 Release

DLT8000 60-slot Library A5587A, A5588A, A4684AZ, A4684AHP, A4685AHP Mar 00 Release

DLT8000 100-slot Library A4665A, A4666A June 00 Release

DLT8000 120-slot Library A4667A, A4668A June 00 Release

DLT8000 140-slot Library A4669A, A4670A June 00 Release

DLT8000 700-slot Library A5597A Mar 00 Release

DLT8000 180-slot Library A5617A Mar 00 Release

The SCSI tape devices monitor supports the following tape libraries and autoloaders:

DDS-2 Autoloader

DDS-3 Autoloader

DLT 4000 & 7000; HP Surestore Tape Libary Model 2/28

DLT 4000 & 7000; HP Surestore Tape Library Model 4/48

DLT 4000 & 7000; 588 slot; Drives Diff; Robotics SE

DLT 4000 & 7000; 100 slot; Drives Diff; Robotics SE

DLT 4000 & 7000; 30 slot; Differential

As of the March 2000 release (IPR 0003), the monitor also supports the following devices:

DDS-4 Autoloader

DLT7000 HP Surestore Tape Autoloader Model 1/9

DLT8000 HP Surestore Tape Autoloader Model 1/9

DLT8000 HP Surestore Tape Library Model 2/20

DLT8000 HP Surestore Tape Library Model 4/40

DLT8000 HP Surestore Tape Library Model 6/60

DLT8000 HP Surestore Tape Library Model 20/700

DLT8000 HP Surestore Tape Library Model 10/180

As of the June 2000 release (IPR 0006), the monitor also support the following devices:

DLT8000 100-slot, 120-slot, 140-slot Library

As of the September 2000 release (IPR0009), the monitor also supports the following devices:

Ultrium HP Surestore Tape Library Model 20/700

Ultrium HP Surestore Tape Library Model 10/180

As of the September 2002 release (HWE0209), the monitor also supports the following devices:

Ultrium 20, 40, 60, 100, 120, and 140-slot Library

Ultrium HP Surestore Tape Autoloader Model 1/9

High Availability Storage Systems

Product Model/Product
Number Special
Requirements

HP High Availability Storage System
Supported by: High-Availability Storage System Monitor
1010D None

HP SureStore E Disk System
Supported by: High-Availability Storage System Monitor
SC10 None

HP SureStore Disk System
Supported by: High-Availability Storage System Monitor
2300 None

HP SureStore Disk System
Supported by: High-Availability Storage System Monitor
2405 None

Fibre Channel SCSI Multiplexers

Product Model/Product
Number Special
Requirements

HP Fibre Channel SCSI Multiplexer
Supported by: Fibre Channel SCSI Multiplexer Monitor
A3308A Firmware version 3840

Fibre Channel Adapters

Product Model/Product
Number Special
Requirements

HP Fibre Mass Storage Channel Adapters
Supported by: Fibre Channel Adapters Monitor (dm_FCMS_adapter)
A3404A
A3591A
A3636A
A3740A The following driver revisions are required:

B.11.00 release IPR9808 (Rocklin version)

For product support information, see:
http://itrc.hp.com
For the documentation of the monitor, see:
http://docs.hp.com/en/diag

Fibre Channel Mass Storage Adapters
Supported by: Fibre Channel Adapter Monitor (dm_TL_adapter)
A5158A
A6684A
A6685A
A6795A B.11.00 Tachlite driver (td) Dart48
B.11.00 release IPR0003 or later

For information on the driver and the STM versions required for the Fibre Channel host bus adapters, see:
http://itrc.hp.com
For the documentation of the monitor, see:
http://docs.hp.com/en/diag

Fibre Channel Mass Storage Adapters
Supported by Fibre Channel Adapter Monitor (dm_ql_adapter)
HP A6826A, HP A9782A HPUX 11.11 Support Tools Bundle, Sep 2003 Codename: 2p2g
For product support information, see:
http://itrc.hp.com
For the documentation of the monitor, see:
http://docs.hp.com/en/diag

Fibre Channel Mass Storage Adapters
Supported by RAID Adapters Monitor (dm_raid_adapter)
HP A7992A HPUX 11.11 Support Tools Bundle, Sep 2003 Codename: CISS
For product support information, see:
http://itrc.hp.com
For the documentation of the monitor, see:
http://docs.hp.com/en/diag

HP SAS Mass Storage Adapter
Supported by SAS Mass Storage Adapter Monitor (dm_sas_adapter)
SAS_399490-001 HP-UX 11i v2 (11.23) June 2006
For product support information, see:
http://itrc.hp.com
For the documentation of the monitor, see:
http://docs.hp.com/en/diag

Fibre Channel Arbitrated Loop Hubs

Product Model/Product
Number Special
Requirements

HP Fibre Channel Arbitrated Loop Hubs
Supported by: Fibre Channel Arbitrated Loop Hub Monitor
A3724A
A4839A The FC-AL Hub monitor requires:
Device Firmware revisions

Device Agent Firmware revision 2.14 or greater

Hub Controller Firmware revision 3.06 or greater
Firmware and installation instructions are available at http://www.hp.com/go/softwaredepot

C++ runtime support patches

11.00 PHSS_16587 (supersedes PHSS_14577)

Before using the hub monitor, edit the monitor configuration file (/var/stm/config/tools/monitor/dm_fc_hub.cfg) to indicate what hubs will be monitored.

Fibre Channel Switches

Product Model/Product
Number Special
Requirements

HP Fibre Channel Switches
Supported by: Fibre Channel Switch Monitor
A5223A and A5224A The FC Switch monitor requires:
C++ runtime support patches

11.00 PHSS_16587 (supersedes PHSS_14577)

Before using the hub monitor, edit the monitor configuration file (/var/stm/config/tools/monitor/dm_fc_sw.cfg) to indicate what switches will be monitored.

Memory

Product Model/Product
Number Special
Requirements

All of system memory on PA-RISC based systems.
Supported by: Memory Monitor
NA None

Itanium Memory Monitor: monitor for all of system memory on Itanium-based systems.
Supported by: Itanium Memory Monitor
NA HP-UX 11.22 OS or later.

System

Product Model/Product
Number Special
Requirements

A monitor designed to monitor all system chassis logs. It reads all the chassis logs from the file /var/stm/logs/os/ccbootlog.
Supported by: Chassis Code Monitor Superdome
S-Class For HP-UX 11.11 OS only.
The chassis code logging daemon (cclogd) must be up and running.

Core hardware (hardware within the SPU cabinet), for example, intake temperature. On some systems, other hardware such as power supplies are monitored.
Supported by: Core Hardware Monitor
NA HP-UX 11.x

Corrected Machine Checks (CMCs) experienced by Itanium based systems.
Supported by: CMC Monitor NA HP-UX 11.22 or later.

Corrected Platform Error (CPE) Monitor for all IPF systems.
Supported by: CPE Monitor NA HP-UX 11.23 OS or later.

Core hardware on HP-PA and IPF systems, for example, temperature or power supply problems.
Supported by: Itanium Core Hardware Monitor NA HP-UX 11.22 or later for IPF systems.
HP-UX 11.11 for HP-PA systems.

Low Priority Machine Checks (LPMCs) experienced by computer systems containing the PA8500 (PCX-W) processor.
Supported by: LPMC Monitor
NA HP-UX 11.x

IPMI Forward Progress Log Monitor monitors IPMI FPL log entries on the system.
Supported by: IPMI Forward Progress Log Monitor
NA All HP-UX IPF systems running HP-UX 11.23 or later.
All HP-UX PA systems running HP-UX 11.11 with HWE0312 or later.
The ia64_corehw monitor must be running.

HP-UX kernel resources, such as Number of Running Processes (nproc) or Number of Opened Files (nfile).
Supported by: Kernel Resource Monitor
Hardware: HP 9000(/V) S700 and S800
Software: HP-UX 11.0 (B.11.0), both 32 bit and 64 bit HP-UX 11.x.
Requires configuration through SAM.

System Status (whether the monitored systems are up and running, and whether they have Online Diagnostic software installed and running.)
Supported by: System Status Monitor
NA None

Interface Cards

Product Model/Product
Number Special
Requirements

SCSI1, SCSI2 and SCSI3 interface cards on all HP-UX systems.
Supported by: SCSI Card Monitor
NA None

Other

Product Model/Product
Number Special
Requirements

iSCSI Subsystem
HP-UX software solution for iSCSI protocol

Supported by:
iSCSI Subsystem Monitor
NA HPUX 11.23, Patch PHSS_30041 for IA1123(11.23)
Codename: iHOP
For product support information, see:
http://itrc.hp.com
For the documentation of the monitor, see:
http://docs.hp.com/en/diag

HP Storage Array
Supported by: Remote Monitor
As of July 13, 2000:

HP A6188A storage array

HP A6189A storage array

HP A6218A storage array

As of January 2003:

HP A6189B storage array

HP-UX 11.xx, Sept 2000 or later
TCP/IP port 2818 must be available

HP UPSs (Uninterruptible Power Systems)
Supported by: UPS Monitor
HP PowerTrust
A2941A (600VA)
A2994A (1300VA)
A2996B (1.3kVA)
A2997B (1.8kVA)
A2998B (3.0kVA)
A3589B (5.5kVA)
HP PowerTrust II-LR
A1353A (2.0kVA 120V)
A1354A (2.0kVA 240V)
A1356A (3.0kVA 240V)

HP PowerTrust II-MR
A6583A (4.0kW 240V)
A6584A (6.5kW 240V)
A6585A (8.0kW 240V)
The HP-UX monitoring daemon ups_mond, which is shipped on all Series 800 systems (not shipped on S700 systems)

Product	Model/Product Number	Special Requirements
HP AutoRAID Disk Array Supported by: AutoRAID Disk Array Monitor	12H 12	Requires the following ARMServer versions: HP-UX 11.00 (Patch PHCO_23262) HP-UX 11.11 (Patch PHCO_23263)
HP High Availability Disk Array Supported by: High-Availability Disk Array Monitor	30/FC 20 10	None
HP Fast/Wide SCSI Disk Array Supported by: Fast/Wide SCSI Disk Array Monitor	C243XHA	None
HP Fibre Channel High Availability Disk Array (Model 60/FC) Supported by: Disk Array FC60 Monitor	HP SureStore E Disk Array FC60	11.00 PHCO_26823 11.11 PHCO_26824
HP Storage Works Modular SAN array 1000 HP Storage Works Modular SAN array 30 Supported by: HP Storage Works Modular SAN array 1000/30 Monitor	HP Storage Works Modular SAN array 1000 HP Storage Works Modular SAN array 30	Starting with HP-UX 11i V2 March 2004 release of OnlineDiag, MSA 1000 is supported on the following cards: A6795A (2 Gbps, 64-bit 66 MHz PCI) A6826A (2 Gbps, 64-bit PCI Dual Channel) Starting with HP-UX 11i June 2004 release and HP-UX 11i V2 September 2004 release of OnlineDiag, MSA 1000 is supported on the following cards : A9782A (2 Gbps, 64-bit PCI Dual Channel combo) A9784A (2 Gbps, 64-bit PCI Dual Channel combo)

Product	Model/Product Number	Special Requirements
All disks bound to the sdisk and disc30 drivers and not under the control of another event monitor (such as a disk array monitor). Hitachi XP256, XP512, XP128, and XP1024 drives and EMC Symetrix drives are not supported, since these drives have their own monitoring. Supported by: Disk Monitor	NA	None

Product	Model/Product Number	Special Requirements
DDS-2 Autoloader	A3400A	None
DDS-3 Autoloader	A3716A	None
DDS-4 Autoloader	C6370A, C6371A	Mar 00 Release
DLT4000 4/48 Library; HP-UX; Differential SCSI	A3544A	None
DLT4000 2/48 Library; HP-UX; Differential SCSI	A3545A	None
DLT4000 2/28 Library; HP-UX; Differential SCSI	A3546A	None
DLT 4000 & 7000; 2/28; Drives Differential; Robotics SE/Diff	A4850A	None
DLT 4000 & 7000; 4/48; Drives Differential; Robotics SE/Diff	A4855A	None
DLT 4000 & 7000; 15 slot; Deskside/Rack; Differential	A4851A	None
DLT 4000 & 7000; 588 slot; Drives Diff; Robotics SE	A4845A	None
DLT 4000 & 7000; 100 slot; Drives Diff; Robotics SE	A4846A	None
DLT 4000 & 7000; 30 slot; Differential	A4853A	None
DLT7000 8-slot Library	A5501A	Mar 00 Release
DLT8000 8-slot Library	A1375A	Mar 00 Release
DLT8000 20-slot Library	A5583A, A5584A, A4680AZ, A4680AHP, A4681AHP	Mar 00 Release
DLT8000 40-slot Library	A5585A, A5586A, A4682AZ, A4682AHP, A4683AHP	Mar 00 Release
DLT8000 60-slot Library	A5587A, A5588A, A4684AZ, A4684AHP, A4685AHP	Mar 00 Release
DLT8000 100-slot Library	A4665A, A4666A	June 00 Release
DLT8000 120-slot Library	A4667A, A4668A	June 00 Release
DLT8000 140-slot Library	A4669A, A4670A	June 00 Release
DLT8000 700-slot Library	A5597A	Mar 00 Release
DLT8000 180-slot Library	A5617A	Mar 00 Release
The SCSI tape devices monitor supports the following tape libraries and autoloaders: DDS-2 Autoloader DDS-3 Autoloader DLT 4000 & 7000; HP Surestore Tape Libary Model 2/28 DLT 4000 & 7000; HP Surestore Tape Library Model 4/48 DLT 4000 & 7000; 588 slot; Drives Diff; Robotics SE DLT 4000 & 7000; 100 slot; Drives Diff; Robotics SE DLT 4000 & 7000; 30 slot; Differential As of the March 2000 release (IPR 0003), the monitor also supports the following devices: DDS-4 Autoloader DLT7000 HP Surestore Tape Autoloader Model 1/9 DLT8000 HP Surestore Tape Autoloader Model 1/9 DLT8000 HP Surestore Tape Library Model 2/20 DLT8000 HP Surestore Tape Library Model 4/40 DLT8000 HP Surestore Tape Library Model 6/60 DLT8000 HP Surestore Tape Library Model 20/700 DLT8000 HP Surestore Tape Library Model 10/180 As of the June 2000 release (IPR 0006), the monitor also support the following devices: DLT8000 100-slot, 120-slot, 140-slot Library As of the September 2000 release (IPR0009), the monitor also supports the following devices: Ultrium HP Surestore Tape Library Model 20/700 Ultrium HP Surestore Tape Library Model 10/180 As of the September 2002 release (HWE0209), the monitor also supports the following devices: Ultrium 20, 40, 60, 100, 120, and 140-slot Library Ultrium HP Surestore Tape Autoloader Model 1/9

Product	Model/Product Number	Special Requirements
HP High Availability Storage System Supported by: High-Availability Storage System Monitor	1010D	None
HP SureStore E Disk System Supported by: High-Availability Storage System Monitor	SC10	None
HP SureStore Disk System Supported by: High-Availability Storage System Monitor	2300	None
HP SureStore Disk System Supported by: High-Availability Storage System Monitor	2405	None

Product	Model/Product Number	Special Requirements
HP Fibre Channel SCSI Multiplexer Supported by: Fibre Channel SCSI Multiplexer Monitor	A3308A	Firmware version 3840

Product	Model/Product Number	Special Requirements
HP Fibre Mass Storage Channel Adapters Supported by: Fibre Channel Adapters Monitor (dm_FCMS_adapter)	A3404A A3591A A3636A A3740A	The following driver revisions are required: B.11.00 release IPR9808 (Rocklin version) For product support information, see: http://itrc.hp.com For the documentation of the monitor, see: http://docs.hp.com/en/diag
Fibre Channel Mass Storage Adapters Supported by: Fibre Channel Adapter Monitor (dm_TL_adapter)	A5158A A6684A A6685A A6795A	B.11.00 Tachlite driver (td) Dart48 B.11.00 release IPR0003 or later For information on the driver and the STM versions required for the Fibre Channel host bus adapters, see: http://itrc.hp.com For the documentation of the monitor, see: http://docs.hp.com/en/diag
Fibre Channel Mass Storage Adapters Supported by Fibre Channel Adapter Monitor (dm_ql_adapter)	HP A6826A, HP A9782A	HPUX 11.11 Support Tools Bundle, Sep 2003 Codename: 2p2g For product support information, see: http://itrc.hp.com For the documentation of the monitor, see: http://docs.hp.com/en/diag
Fibre Channel Mass Storage Adapters Supported by RAID Adapters Monitor (dm_raid_adapter)	HP A7992A	HPUX 11.11 Support Tools Bundle, Sep 2003 Codename: CISS For product support information, see: http://itrc.hp.com For the documentation of the monitor, see: http://docs.hp.com/en/diag
HP SAS Mass Storage Adapter Supported by SAS Mass Storage Adapter Monitor (dm_sas_adapter)	SAS_399490-001	HP-UX 11i v2 (11.23) June 2006 For product support information, see: http://itrc.hp.com For the documentation of the monitor, see: http://docs.hp.com/en/diag

Product	Model/Product Number	Special Requirements
HP Fibre Channel Arbitrated Loop Hubs Supported by: Fibre Channel Arbitrated Loop Hub Monitor	A3724A A4839A	The FC-AL Hub monitor requires: Device Firmware revisions Device Agent Firmware revision 2.14 or greater Hub Controller Firmware revision 3.06 or greater Firmware and installation instructions are available at http://www.hp.com/go/softwaredepot C++ runtime support patches 11.00 PHSS_16587 (supersedes PHSS_14577) Before using the hub monitor, edit the monitor configuration file (/var/stm/config/tools/monitor/dm_fc_hub.cfg) to indicate what hubs will be monitored.

Product	Model/Product Number	Special Requirements
HP Fibre Channel Switches Supported by: Fibre Channel Switch Monitor	A5223A and A5224A	The FC Switch monitor requires: C++ runtime support patches 11.00 PHSS_16587 (supersedes PHSS_14577) Before using the hub monitor, edit the monitor configuration file (/var/stm/config/tools/monitor/dm_fc_sw.cfg) to indicate what switches will be monitored.

Product	Model/Product Number	Special Requirements
All of system memory on PA-RISC based systems. Supported by: Memory Monitor	NA	None
Itanium Memory Monitor: monitor for all of system memory on Itanium-based systems. Supported by: Itanium Memory Monitor	NA	HP-UX 11.22 OS or later.

Product	Model/Product Number	Special Requirements
A monitor designed to monitor all system chassis logs. It reads all the chassis logs from the file /var/stm/logs/os/ccbootlog. Supported by: Chassis Code Monitor	Superdome S-Class	For HP-UX 11.11 OS only. The chassis code logging daemon (cclogd) must be up and running.
Core hardware (hardware within the SPU cabinet), for example, intake temperature. On some systems, other hardware such as power supplies are monitored. Supported by: Core Hardware Monitor	NA	HP-UX 11.x
Corrected Machine Checks (CMCs) experienced by Itanium based systems. Supported by: CMC Monitor	NA	HP-UX 11.22 or later.
Corrected Platform Error (CPE) Monitor for all IPF systems. Supported by: CPE Monitor	NA	HP-UX 11.23 OS or later.
Core hardware on HP-PA and IPF systems, for example, temperature or power supply problems. Supported by: Itanium Core Hardware Monitor	NA	HP-UX 11.22 or later for IPF systems. HP-UX 11.11 for HP-PA systems.
Low Priority Machine Checks (LPMCs) experienced by computer systems containing the PA8500 (PCX-W) processor. Supported by: LPMC Monitor	NA	HP-UX 11.x
IPMI Forward Progress Log Monitor monitors IPMI FPL log entries on the system. Supported by: IPMI Forward Progress Log Monitor	NA	All HP-UX IPF systems running HP-UX 11.23 or later. All HP-UX PA systems running HP-UX 11.11 with HWE0312 or later. The ia64_corehw monitor must be running.
HP-UX kernel resources, such as Number of Running Processes (nproc) or Number of Opened Files (nfile). Supported by: Kernel Resource Monitor	Hardware: HP 9000(/V) S700 and S800 Software: HP-UX 11.0 (B.11.0), both 32 bit and 64 bit	HP-UX 11.x. Requires configuration through SAM.
System Status (whether the monitored systems are up and running, and whether they have Online Diagnostic software installed and running.) Supported by: System Status Monitor	NA	None

Product	Model/Product Number	Special Requirements
SCSI1, SCSI2 and SCSI3 interface cards on all HP-UX systems. Supported by: SCSI Card Monitor	NA	None

Product	Model/Product Number	Special Requirements
iSCSI Subsystem HP-UX software solution for iSCSI protocol Supported by: iSCSI Subsystem Monitor	NA	HPUX 11.23, Patch PHSS_30041 for IA1123(11.23) Codename: iHOP For product support information, see: http://itrc.hp.com For the documentation of the monitor, see: http://docs.hp.com/en/diag
HP Storage Array Supported by: Remote Monitor	As of July 13, 2000: HP A6188A storage array HP A6189A storage array HP A6218A storage array As of January 2003: HP A6189B storage array	HP-UX 11.xx, Sept 2000 or later TCP/IP port 2818 must be available
HP UPSs (Uninterruptible Power Systems) Supported by: UPS Monitor	HP PowerTrust A2941A (600VA) A2994A (1300VA) A2996B (1.3kVA) A2997B (1.8kVA) A2998B (3.0kVA) A3589B (5.5kVA) HP PowerTrust II-LR A1353A (2.0kVA 120V) A1354A (2.0kVA 240V) A1356A (3.0kVA 240V) HP PowerTrust II-MR A6583A (4.0kW 240V) A6584A (6.5kW 240V) A6585A (8.0kW 240V)	The HP-UX monitoring daemon ups_mond, which is shipped on all Series 800 systems (not shipped on S700 systems)

Top of Page

/ Diagnostics HOME

URL: http://docs.hp.com/hpux/onlinedocs/diag/ems/ems_prod.htm
Last updated: Thursday, April 27 04:09:33 PST 2006