The following list identifies all the SCSI-related events that may occur on any hardware monitor. The events are generated by the Default SCSI Decode/Monitor Library.These events are in addition to the events specifically generated by each individual monitor.
Use this message listing for versions of Hardware Monitors from June 2000 and forwards (IPR 0006 and later).
For previous versions of the monitors, use: SCSI Events (Feb 99 - March 00)
The event descriptions are in numerical order by event number. (To quickly find an event number, use the "Find" function in your browser.) If you don't find the desired event in this document, try looking in SCSI Events (Feb 99 - March 00).
The string "0xXX" in the event listings means "ANY VALUE". For example, if an event is listed with SCSI Status = 0xXX, then the event description applies for any value of SCSI Status.
At the end of this document is a table of events, ordered by Sense Code, Qualifier, Key, SCSI Status and Device Class.
Some events may have more than one entry, for different combinations of "Device" and the three elements of SCSI sense data:
- Sense Key ("Key", "K"),
- Additional Sense Code ("Code", "C"),
- Additional Sense Code Qualifier ("Qualifier", "Q").
In most cases, the default SCSI library expects to get the information from a particular device class. For these cases, the Dev field will list the device class. Otherwise, if the library does not depend on which device is sending the information or if the combination of Code/Qual/Key is valid for all types of devices, the Dev field will be listed as ALL.
Event 100002
- Code:0x48 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The device adapter assigned to the device has received an error message.
- Probable Cause / Recommended Action: No action is necessary.
Event 100004
- Code:0x5a Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The device has received an unspecified operator request, or an operator control has changed state.
- Probable Cause / Recommended Action: No action is necessary.
Event 100005
- Code:0x5a Qualifier:0x01 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The device has received an operator medium removal request.
- Probable Cause / Recommended Action: Remove the medium from the device.
Event 100006
- Code:0x5a Qualifier:0x02 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The operator of the device has switched on the write protect function.
- Probable Cause / Recommended Action: No action is necessary.
Event 100007
- Code:0x5a Qualifier:0x03 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The operator of the device has switched off the write protect function.
- Probable Cause / Recommended Action: No action is necessary.
Event 100010
- Code:0x30 Qualifier:0x03 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Medium in device cannot be used
- Problem Description: The device driver was unsuccessful in processing an I/O request because the device has a cleaning cartridge inserted into its mechanism.
- Probable Cause / Recommended Action: Remove the cleaning cartridge and replace it with a data cartridge.
Event 100012
- Code:0x51 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Medium in device cannot be used
- Problem Description: The device was unsuccessful in erasing the requested field of its medium. The medium may be unusable.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100013
- Code:0x00 Qualifier:0x11 Key:0x00 Status:0xXX
- Device: CDROM
- Severity: INFORMATION
- Event Summary: Audio compact disc operation in progress
- Problem Description: An audio compact disc is being played.
- Probable Cause / Recommended Action: No action is necessary.
Event 100014
- Code:0x00 Qualifier:0x12 Key:0x00 Status:0xXX
- Device: CDROM
- Severity: INFORMATION
- Event Summary: Audio compact disc operation in progress
- Problem Description: An audio compact disc which was playing, is now paused.
- Probable Cause / Recommended Action: No action is necessary.
Event 100015
- Code:0x00 Qualifier:0x13 Key:0x00 Status:0xXX
- Device: CDROM
- Severity: INFORMATION
- Event Summary: Audio compact disc operation in progress
- Problem Description: An audio compact disc which was playing, has now finished.
- Probable Cause / Recommended Action: No action is necessary.
Event 100016
- Code:0x00 Qualifier:0x15 Key:0x00 Status:0xXX
- Device: CDROM
- Severity: INFORMATION
- Event Summary: Audio compact disc operation in progress
- Problem Description: During an attempt to obtain the current audio status of a Compact Disc, the device reported that none was available to return.
- Probable Cause / Recommended Action: No action is necessary.
Event 100017
- Code:0x3f Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Device configuration change
- Problem Description: The device has had its operating conditions changed by a device adapter other than the one currently assigned to it.
- Probable Cause / Recommended Action: No action is necessary.
Event 100018
- Code:0x3f Qualifier:0x01 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Device configuration change
- Problem Description: The device has had its microcode changed by a device adapter other than the one currently assigned to it.
- Probable Cause / Recommended Action: No action is necessary.
Event 100019
- Code:0x3f Qualifier:0x02 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Device configuration change
- Problem Description: The device has had its operating definition changed by a device adapter other than the one currently assigned to it.
- Probable Cause / Recommended Action: No action is necessary.
Event 100020
- Code:0x3f Qualifier:0x03 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Device configuration change
- Problem Description: The device has had its inquiry data changed by a device adapter other than the one currently assigned to it.
- Probable Cause / Recommended Action: No action is necessary.
Event 100021
- Code:0x2a Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Device configuration change
- Problem Description: The device has had its parameters changed by a device adapter other than the one currently assigned to it.
- Probable Cause / Recommended Action: No action is necessary.
Event 100022
- Code:0x2a Qualifier:0x01 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Device configuration change
- Problem Description: The device has had its operational mode parameters changed by a device adapter other than the one currently assigned to it.
- Probable Cause / Recommended Action: No action is necessary.
Event 100023
- Code:0x2a Qualifier:0x02 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Device configuration change
- Problem Description: The device has had its log parameters changed by a device adapter other than the one currently assigned to it.
- Probable Cause / Recommended Action: No action is necessary.
Event 100024
- Code:0x5c Qualifier:0x00 Key:0x06 Status:0xXX
- Device: DISK
- Severity: INFORMATION
- Code:0x5c Qualifier:0x00 Key:0x06 Status:0xXX
- Device:OPTICAL
- Severity: INFORMATION
- Code:0x5c Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Device configuration change
- Problem Description: The device has reported an RPL status change in response to a request from the device driver.
- Probable Cause / Recommended Action: No action is necessary.
Event 100025
- Code:0x59 Qualifier:0x00 Key:0x01 Status:0xXX
- Device:OPTICAL
- Severity: INFORMATION
- Code:0x59 Qualifier:0x00 Key:0x01 Status:0xXX
- Device: DISK
- Severity: INFORMATION
- Code:0x59 Qualifier:0x00 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: updated block has been read from the optical device.
- Probable Cause / Recommended Action: This message was logged because the operational flags pertaining to logging for the device have been set to log reading of updated blocks. No action is necessary.
Event 100027
- Code:0x3e Qualifier:0x00 Key:0x02 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Device cannot be used
- Problem Description: The device has received an I/O request which it cannot process because it is in the process of configuring itself. The request will be re-tried.
- Probable Cause / Recommended Action: If diagnostics are being run on this device, that may be the source of this problem. Wait until the diagnostics are complete before attempting to use the device for normal I/O.
Alternatively, the device could be in a state from which it cannot extract itself. Cycle power to the device.
Alternatively, the device has experienced a hardware failure and should be repaired or replaced, as necessary.Event 100028
- Code:0x04 Qualifier:0x04 Key:0x02 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Device cannot be used
- Problem Description: The device was not ready to process requests when it received a request from the device driver because its media is being formatted.
- Probable Cause / Recommended Action: A process has attempted to access the device while another process is formatting its media. Wait until the format is complete before attempting to access the device.
Event 100029
- Code:0x5b Qualifier:0x01 Key:0x06 Status:0xXX
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Excessive errors for device
- Problem Description: The device has met a pre-set threshold condition for its internal error log.
- Probable Cause / Recommended Action: Examine the error logs to determine which parameter met the condition. If the condition being tested involves excessive media errors, the medium may need to be replaced. If the medium is non-removable, repair or replace the device, as necessary.
Event 100031
- Code:0x5b Qualifier:0x03 Key:0x06 Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Code:0x5b Qualifier:0x03 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device has exhausted its supply of log list codes while attempting to add a condition to its list to be logged.
- Probable Cause / Recommended Action: There is a problem with the device configuration. Select no more than the number of codes supported by the device.
Event 100034
- Code:0x45 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware configuration error
- Problem Description: The device reported that it was unable to perform the requested select or reselect operation. Data loss may occur as a result.
- Probable Cause / Recommended Action: There could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique, removing devices to reduce the number to seven or less.
Alternatively, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100035
- Code:0x07 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware configuration error
- Problem Description: While attempting to process an I/O request, the device driver was unable to proceed because multiple peripheral devices were in a selected state. The request was not processed.
- Probable Cause / Recommended Action: There could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique, removing devices to reduce the number to seven or less.
Alternatively, one device on the SCSI bus has failed to respond to a deselection request. Isolate and repair or replace the failing device, as necessary.Event 100038
- Code:0x31 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Media failure
- Problem Description: The format of the medium in the device is corrupt. The medium is unusable.
- Probable Cause / Recommended Action: A format operation in progress on the device may have been interrupted. Restart the formatting process.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repaired or replace the device, as necessary.Event 100039
- Code:0x31 Qualifier:0x01 Key:0x03 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in performing a format operation upon its medium. The medium is unusable.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100044
- Code:0x57 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to perform a read operation, the CD-ROM device was unable to read the table of contents stored on the medium. Data loss has likely occurred.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100045
- Code:0x53 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Physical media error
- Problem Description: An attempt to load media into the device or eject media from the device has failed.
- Probable Cause / Recommended Action: The medium is damaged. Replace the medium with a fresh one.
Alternatively, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100046
- Code:0x00 Qualifier:0x14 Key:0x00 Status:0xXX
- Device: CDROM
- Severity: MINOR_WARNING
- Event Summary: Physical media error
- Problem Description: While playing an audio compact disc, the device has stopped playing due to an error.
- Probable Cause / Recommended Action: The compact disc may need cleaning. Clean it in the manner documented in the device manual.
Alternatively, the compact disc may be damaged. Replace it with an undamaged one.Event 100047
- Code:0x5b Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Hardware failure
- Problem Description: The device reported an error log exception while attempting to operate on its internal error log.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100048
- Code:0x5c Qualifier:0x02 Key:0x06 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Hardware failure
- Problem Description: The spindles of the device are not synchronized for a data transfer that requires it. The request was not processed, but will be retried.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100049
- Code:0x4c Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device has failed its self-configuration procedure.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100050
- Code:0x11 Qualifier:0x0a Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device has miscorrected a data error on the medium. The corresponding I/O request has likely been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100053
- Code:0x10 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x10 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x10 Qualifier:0x00 Key:0x04 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x10 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device was unsuccessful in processing the current I/O request due to a CRC or ECC error. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100054
- Code:0x2b Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device driver received a status from the device indicating that it could not perform the requested copy data operation because the device adapter could not disconnect from the SCSI bus. The I/O request was not processed.
- Probable Cause / Recommended Action: The device adapter is in a state where it could not logically disconnect from the SCSI bus. Perform a system shutdown. Cycle power to the computer and wait for it to reboot. If this does not correct the condition, the device adapter has experienced a hardware failure. Replace it.
Event 100056
- Code:0x11 Qualifier:0x03 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request because it encountered multiple read errors on the medium and was unable to recover. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100057
- Code:0x44 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device was unsuccessful in processing the current I/O request due to an internal target failure. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100059
- Code:0x15 Qualifier:0x02 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device detected an error in positioning the head by reading the medium.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100060
- Code:0x15 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported a random positioning error.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100061
- Code:0x01 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x01 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x01 Qualifier:0x00 Key:0x04 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x01 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported that it does not have the index/sector signal. The corresponding I/O request has likely been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100062
- Code:0x02 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x02 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x02 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: CDROM
- Severity: CRITICAL
- Code:0x02 Qualifier:0x00 Key:0x04 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x02 Qualifier:0x00 Key:0x04 Status:0xXX
- Device:CHANGER
- Severity: CRITICAL
- Code:0x02 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported that it did not receive the seek complete signal. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100063
- Code:0x03 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported that it was unable to perform the requested write operation due to a peripheral device write fault. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100064
- Code:0x09 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x09 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported a track following error. The device head is unable to stay on the assigned track. The corresponding I/O request and subsequent requests may be processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100065
- Code:0x09 Qualifier:0x01 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported a tracking servo failure. The device head is unable to position to any track. The corresponding I/O request and subsequent requests may be processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100067
- Code:0x42 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x42 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device has failed its power-on self-test.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100068
- Code:0x40 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device has failed its power-on diagnostics for a specified field-replaceable unit.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
- Details: The combination of Additional Sense Code and Sense Qualifier (0x4000) indicates: Power-on or self-test failure for FRU indicated by sense code qualifier.
NOTE: valid values for the Additional Sense Code and Sense Qualifier for event #100068 range from 0x4000 to 0x400FF, where 0x40 is the Additional Sense Code.
Event 100074
- Code:0x05 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was unable to select one of its logical units.
- Probable Cause / Recommended Action: If the device is a disk array, one of its drives was pulled out physically. This in itself will not cause data loss because the disk array can rebuild the data.
Alternatively, if the device is not a disk array, check the following. The device may have been powered off and being powered on.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Put the terminators back in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique
Alternatively, the total length of all cable segments on the SCSI bus exceeds 25 meters. Replace one or more cable segments until the total length is less than this value.
Alternatively, if all of the above fail to correct the problem, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100075
- Code:0x08 Qualifier:0x02 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was unsuccessful in its attempt to communicate with one of its logical units due to a parity error. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: A segment of the SCSI bus within the device may be damaged. Replace the damaged segment.
Alternatively, the logical unit has experienced a hardware failure. Repair or replace the logical unit, as necessary.Event 100077
- Code:0x00 Qualifier:0x01 Key:0x06 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: While processing an I/O request, the tape in the device has reached a filemark on the medium.
- Probable Cause / Recommended Action: No action is necessary.
Event 100078
- Code:0x00 Qualifier:0x02 Key:0x06 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: While processing an I/O request, the tape in the device has reached the end of the medium.
- Probable Cause / Recommended Action: No action is necessary.
Event 100079
- Code:0x00 Qualifier:0x03 Key:0x06 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: While processing an I/O request, the tape in the device has reached a setmark.
- Probable Cause / Recommended Action: No action is necessary.
Event 100080
- Code:0x00 Qualifier:0x04 Key:0x06 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: While processing an I/O request, the tape in the device has reached the beginning of the medium.
- Probable Cause / Recommended Action: No action is necessary.
Event 100081
- Code:0x00 Qualifier:0x05 Key:0x04 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: While processing an I/O request, the tape in the device has reached the end of data.
- Probable Cause / Recommended Action: No action is necessary.
Event 100082
- Code:0x03 Qualifier:0x01 Key:0x04 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported that it was unable to perform the requested write operation because it did not have write current. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100083
- Code:0x03 Qualifier:0x02 Key:0x04 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to process an I/O request, the device reported that it was unable to perform the requested write operation due to excessive write errors. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Alternatively, if replacing the medium does not correct the problem, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100084
- Code:0x0c Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to write data to its medium, the device encountered a write error. Data loss may have occurred.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100089
- Code:0x28 Qualifier:0x01 Key:0x06 Status:0xXX
- Device:CHANGER
- Severity: INFORMATION
- Code:0x28 Qualifier:0x01 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The media changer device has received a command to operate its picker to change the medium.
- Probable Cause / Recommended Action: No action is necessary.
Event 100091
- Code:0xXX Qualifier:0xXX Key:0x06 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Code:0xXX Qualifier:0xXX Key:0x06 Status:0xXX
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Software configuration error
- Problem Description: The device is in a condition where it requires action on the part of the device driver or a human operator.
- Probable Cause / Recommended Action: The device has been reset by a Bus Device Reset message, a hard reset condition, or a power-on reset. If this is the case, no action is necessary.
Alternatively, a removable medium has been loaded or replaced. If this is the case, no action is necessary.
Alternatively, the mode parameters, microcode, or inquiry data for the device have been changed. If this is the case, no action is necessary.
Alternatively, the installed version of the device driver does not match that of the installed version of HP-UX. Install the correct version of the driver.Event 100092
- Code:0xXX Qualifier:0xXX Key:0x08 Status:0xXX
- Device: CDROM
- Severity: SERIOUS
- Code:0xXX Qualifier:0xXX Key:0x08 Status:0xXX
- Device: WORM
- Severity: SERIOUS
- Code:0xXX Qualifier:0xXX Key:0x08 Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Code:0xXX Qualifier:0xXX Key:0x08 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The Magneto-Optical or Tape device was unable to read or write the requested data on its medium.
- Probable Cause / Recommended Action: An attempt was made to write data to an already-written portion of the optical device medium, or to read data from an unwritten portion of the optical device medium or past the format-defined end of data on the tape medium. This is an internal error, indicating that the installed version of the driver does not match that of the installed version of HP-UX. Install the correct version of the driver.
Event 100095
- Code:0xXX Qualifier:0xXX Key:0xXX Status:0x10
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: An I/O request for the device was completed successfully. This I/O request was part of a linked sequence of requests.
- Probable Cause / Recommended Action: No action is necessary.
Event 100096
- Code:0xXX Qualifier:0xXX Key:0xXX Status:0x14
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: An I/O request for the device was completed successfully. This I/O request was part of a linked sequence of requests.
- Probable Cause / Recommended Action: No action is necessary.
Event 100097
- Code:0xXX Qualifier:0xXX Key:0xXX Status:0x18
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Recoverable error
- Problem Description: An attempt was made to access a device which was reserved by another initiator.
- Probable Cause / Recommended Action: The device was unable to process the request at this time. The request should be retried by the system. No further action is necessary. However, if the condition persists, there may be hardware problems with the device or the connectivity to the device. Alternately, the device may be in the process of recovering from a powerfail cycle. Alternately, there may be a problem in the configuration of the application software which is using the device causing access conflicts or bottlenecks.
Event 100098
- Code:0xXX Qualifier:0x00 Key:0xXX Status:0x22
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The device has received a request to terminate the current I/O operation. The operation was terminated as requested.
- Probable Cause / Recommended Action: No action is necessary.
Event 100099
- Code:0xXX Qualifier:0xXX Key:0xXX Status:0x28
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Recoverable error
- Problem Description: The command queue for the device is full. The I/O request was not placed in the queue.
- Probable Cause / Recommended Action: The device was unable to process the request at this time. The request should be retried by the system. No further action is necessary. However, if the condition persists, there may be hardware problems with the device or the connectivity to the device. Alternately, the device may be in the process of recovering from a powerfail cycle. Alternately, there may be a problem in the configuration of the application software which is using the device causing access conflicts or bottlenecks.
Event 100100
- Code:0xXX Qualifier:0xXX Key:0xXX Status:0x08
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Recoverable error
- Problem Description: An attempt was made to process an I/O request for a device, but the device was busy with another request.
- Probable Cause / Recommended Action: The device was unable to process the request at this time. The request should be retried by the system. No further action is necessary. However, if the condition persists, there may be hardware problems with the device or the connectivity to the device. Alternately, the device may be in the process of recovering from a powerfail cycle. Alternately, there may be a problem in the configuration of the application software which is using the device causing access conflicts or bottlenecks.
Event 100101
- Code:0x00 Qualifier:0x00 Key:0x00 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The device driver has successfully completed an I/O request.
- Probable Cause / Recommended Action: No action is necessary.
Event 100103
- Code:0x53 Qualifier:0x02 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The media access door for the device has been locked to prevent removal of the medium.
- Probable Cause / Recommended Action: No action is necessary.
Event 100108
- Code:0x28 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Medium loaded or replaced
- Problem Description: The medium in the device has been loaded or replaced.
- Probable Cause / Recommended Action: A program had established a logical connection with the device at a time when no medium was present in it. An I/O operation was requested, then a medium was inserted.
Alternatively, the logical connection was established at a time when an unformatted medium was present in the device. This medium was removed and replaced with either the same or a different medium. No action is necessary.Event 100109
- Code:0x30 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Medium in device cannot be used
- Problem Description: The medium in the device is incompatible with the device.
- Probable Cause / Recommended Action: Replace the medium with one that is compatible with the device.
Event 100111
- Code:0x27 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Medium in device cannot be used
- Problem Description: The device attempted to process a command that would write data to it, but was prevented from doing so because the medium was protected against that.
- Probable Cause / Recommended Action: If the device is of a type whose medium can be write protected, and it is desired to write data to that device, remove the protection.
Alternatively, the device may have experienced a hardware failure. Repair or replace it, as necessary.Event 100126
- Code:0x0c Qualifier:0x01 Key:0x01 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Recoverable write error
- Problem Description: The device was unsuccessful in its first attempt at writing the data for an I/O request, but was able to recover it and reallocate it to a spare area on the medium. The data was successfully written.
- Probable Cause / Recommended Action: No action is necessary.
Event 100130
- Code:0x0a Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Excessive errors for device
- Problem Description: The error log for the device has overflowed.
- Probable Cause / Recommended Action: The device is experiencing high number of errors. Read the device logs and clear them.
Event 100132
- Code:0x2f Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device has had its commands cleared by a device adapter card other than the one designated as the controller for the device.
- Probable Cause / Recommended Action: In a cluster configuration, another controller card is controlling the device. This indicates a problem with the cluster configuration. Correct the configuration.
Event 100133
- Code:0x37 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Code:0x37 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Code:0x37 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: A parameter passed to the device has had its value rounded. The requested data was successfully returned.
- Event Summary: Software configuration error
- Problem Description: A parameter passed to the device has had its value rounded. The requested data was successfully returned.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100136
- Code:0x12 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x12 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x12 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading or writing data for the current I/O request because it could not find the address mark for the identification field and was unable to recover. The I/O request, if it was a write data request, has likely caused damage to data.
- Probable Cause / Recommended Action: The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, reformatting the medium may fix the problem.Event 100137
- Code:0x0c Qualifier:0x02 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in writing the data for the current I/O request. Reallocating the data to a spare area on the medium was attempted, but failed. Damage to or loss of data has likely occurred.
- Probable Cause / Recommended Action: Rewriting the data is recommended. The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, the marginal area on the medium can be re-mapped to use a spare area on the medium manually.Event 100140
- Code:0x19 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x19 Qualifier:0x00 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x19 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so due to a defect list error. The I/O request that necessitated this action may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100141
- Code:0x1c Qualifier:0x00 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x1c Qualifier:0x00 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x1c Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so because it could not find the defect list. The I/O request that necessitated this action may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: If this message appears during a format operation, the message is informational and no action need be taken.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100142
- Code:0x32 Qualifier:0x00 Key:0xXX Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in writing the data for the current I/O request. Reallocating the data to a spare area on the medium was attempted, but failed. Damage to or loss of data has likely occurred.
- Probable Cause / Recommended Action: Rewriting the data is recommended. The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, the marginal area on the medium can be re-mapped to use a spare area on the medium manually.Event 100143
- Code:0x06 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading or writing data for the current I/O request because it could not find the reference position on the medium. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100150
- Code:0x2c Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device driver received a command sequence error from the device. The I/O request may have been processed in a way which could result in damage to or loss of data.
- Probable Cause / Recommended Action: The device could be in a state where it could not process the command. Cycle power to the device. If cycling device power does not correct the condition, perform a system shutdown. Cycle power to the computer and wait for it to reboot. If this does not correct the condition, the device has experienced a hardware failure. Repair or replace the device, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus to which this device is attached, the device adapter has experienced a hardware failure. Replace it.Event 100151
- Code:0x1b Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While performing a synchronous data transfer, the device encountered an error in the process. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Alternatively, if messages corresponding to this error appear in the log for more than one device on the same SCSI bus, the device adapter has experienced a hardware failure. Replace it.Event 100152
- Code:0x00 Qualifier:0x06 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device terminated the request. The I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device could be in a state where it could not process the command. Cycle power to the device. If cycling device power does not correct the condition, perform a system shutdown. Cycle power to the computer and wait for it to reboot. If this does not correct the condition, the device has experienced a hardware failure. Repair or replace the device, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus to which this device is attached, the device adapter has experienced a hardware failure. Replace it.Event 100158
- Code:0x15 Qualifier:0x01 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported a mechanical positioning error.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100166
- Code:0x09 Qualifier:0x02 Key:0x06 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x09 Qualifier:0x02 Key:0x06 Status:0xXX
- Device: CDROM
- Severity: CRITICAL
- Code:0x09 Qualifier:0x02 Key:0x06 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x09 Qualifier:0x02 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported a focus servo failure. The device head is unable to focus on the medium. The corresponding I/O request and subsequent requests may be processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100168
- Code:0x53 Qualifier:0x01 Key:0x03 Status:0xXX
- Device:CHANGER
- Severity: CRITICAL
- Code:0x53 Qualifier:0x01 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in unloading the tape from its mechanism.
- Probable Cause / Recommended Action: The tape cartridge is physically flawed. Replace the cartridge with a fresh one.
Alternatively, if this does not correct the problem, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100170
- Code:0x47 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device was unsuccessful in processing the current I/O request due to a SCSI parity error. Damage to or loss of data may have occurred.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus to which this device is attached, the device adapter has experienced a hardware failure. Replace it.Event 100171
- Code:0x46 Qualifier:0x00 Key:0x0b Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Code:0x46 Qualifier:0x00 Key:0x0b Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device attempted to process a soft reset from the device adapter card but was unsuccessful. A hard reset should be attempted.
- Probable Cause / Recommended Action: The device may have been powered off and may be being powered on.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, the total length of all cable segments on the SCSI bus exceeds 25 meters. Replace one or more cable segments until the total length is less than this value.
Alternatively, if all of the above fail to correct the problem, the device has experienced a hardware failure. Repair or replace it, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus, the device adapter may be in a state from which it cannot extract itself. Perform a system shutdown, cycle power to the computer and wait for it to reboot. If, after reboot, messages corresponding to this condition continue to appear in the log for this SCSI bus, replace the device adapter.Event 100172
- Code:0x04 Qualifier:0x00 Key:0x02 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Code:0x04 Qualifier:0x00 Key:0x02 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was not ready to process requests, but the cause is not reportable.
- Probable Cause / Recommended Action: If the device is a removable medium, this message is informational, indicating that I/O was attempted when a diskette was not inserted in the drive. Place a diskette in the drive before trying to use it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, if another entry corresponding to this condition appears in the log for this device, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100173
- Code:0x04 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was unsuccessful in its attempt to communicate with one of its logical units. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: A segment of the SCSI bus within the device may be damaged. Replace the damaged segment.
Alternatively, the logical unit may be powered down. Power it back up.
Alternatively, one or more of the SCSI cable segments within the device may have become disconnected. Reconnect them.
Alternatively, one or both terminators which belong at the ends of the device's SCSI bus may be missing. Replace them.
Alternatively, the logical unit has experienced a hardware failure and should be repaired or replaced, as necessary.Event 100176
- Code:0x00 Qualifier:0x06 Key:0x0b Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The Storage Processor of High Availability Disk Array has aborted the I/O command due to an unrecoverable error (includes retries exhausted) on the SCSI bus. The I/O request was not completed.
- Probable Cause / Recommended Action: This is an internal error. It indicates that the device is experiencing problems. Please contact H-P support person.
Event 100185
- Code:0x11 Qualifier:0x08 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request because it encountered an incomplete block on the medium. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100186
- Code:0x3b Qualifier:0x01 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to process a motion command, the device has encountered a tape positioning error at the beginning of the medium.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Alternatively, if replacing the medium does not correct the problem, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100187
- Code:0x3b Qualifier:0x08 Key:0x04 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device detected an error in repositioning the head. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100190
- Code:0x3b Qualifier:0x0d Key:0x05 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Physical media error
- Problem Description: The media changer was unsuccessful in moving a disk cassette into a slot because that slot was occupied.
- Probable Cause / Recommended Action: The cassette is mechanically flawed. Replaced the cassette with a fresh one.
Alternatively the picker, the source slot or the target slot has experienced a hardware problem and should be repaired.
Alternatively, the cassette may be jammed in the slot or the picker, preventing the operation. Remove it. This is an internal error, indicating that the installed version of the driver does not match that of the installed version of HP-UX. Install the correct version of the driver.Event 100193
- Code:0xXX Qualifier:0xXX Key:0x0a Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The requested data could not be copied from the source device to the destination device, or the data on the source and destination devices could not be compared.
- Probable Cause / Recommended Action: This is an internal error, indicating that the installed version of the driver does not match that of the installed version of HP-UX. Install the correct version of the driver.
Alternatively, one of the devices involved in the copy or compare operation has experienced a hardware failure. Repair or replace the device, as necessary.Event 100194
- Code:0x1d Qualifier:0x00 Key:0xXX Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x1d Qualifier:0x00 Key:0xXX Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x1d Qualifier:0x00 Key:0xXX Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: An attempt was made to compare data on a medium with user data. The comparison failed.
- Probable Cause / Recommended Action: Rewriting the data is recommended. The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, the marginal area on the medium can be re-mapped to use a spare area on the medium manually.Event 100201
- Code:0xXX Qualifier:0xXX Key:0x00 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The device driver has successfully completed an I/O request.
- Probable Cause / Recommended Action: No action is necessary.
Event 100203
- Code:0x5c Qualifier:0x01 Key:0xXX Status:0xXX
- Device: DISK
- Severity: INFORMATION
- Code:0x5c Qualifier:0x01 Key:0xXX Status:0xXX
- Device:OPTICAL
- Severity: INFORMATION
- Code:0x5c Qualifier:0x01 Key:0xXX Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The spindles of the device are now synchronized for a data transfer that requires it. The request will be processed now.
- Probable Cause / Recommended Action: No action is necessary.
Event 100208
- Code:0x30 Qualifier:0x01 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Medium loaded or replaced
- Problem Description: The medium in the device is incompatible with the device.
- Probable Cause / Recommended Action: Replace the medium with one that is compatible with the device.
Event 100209
- Code:0x30 Qualifier:0x02 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Medium in device cannot be used
- Problem Description: The medium in the device is incompatible with the device.
- Probable Cause / Recommended Action: Replace the medium with one that is compatible with the device.
Event 100211
- Code:0x27 Qualifier:0x00 Key:0x07 Status:0xXX
- Device: DISK
- Severity: INFORMATION
- Event Summary: Medium in device cannot be used
- Problem Description: The device attempted to process a command that would write data to it, but was prevented from doing so because the medium was protected against that.
- Probable Cause / Recommended Action: If the device is of a type whose medium can be write protected, and it is desired to write data to that device, remove the protection.
Alternatively, the device may have experienced a hardware failure. Repair or replace it, as necessary.Event 100226
- Code:0x11 Qualifier:0x06 Key:0xXX Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in its attempt at reading the data requested in an I/O request, even after an attempt to recover it using the CIRC method. The I/O request was unsuccessful.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Alternatively, if replacing the medium does not correct the problem, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100230
- Code:0x5b Qualifier:0x02 Key:0x01 Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Event Summary: Hardware failure
- Problem Description: An error log counter for the device has reached its maximum value.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100232
- Code:0x4e Qualifier:0x00 Key:0x06 Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Code:0x4e Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: While processing an I/O request, the device received another I/O request, from a device adapter card other than the one designated as the controller for the device. The second request was not processed.
- Probable Cause / Recommended Action: In a cluster configuration, another controller card is controlling the device. This indicates a problem with the cluster configuration. Correct the configuration.
Event 100233
- Code:0x39 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Code:0x39 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device is not capable of saving its operational parameters. No loss of data will occur as a result.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100236
- Code:0x13 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x13 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x13 Qualifier:0x00 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x13 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading or writing data for the current I/O request because it could not find the address mark for the data field and was unable to recover. The I/O request, if it was a write data request, has likely caused damage to or loss of data.
- Probable Cause / Recommended Action: The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, reformatting the medium may fix the problem.Event 100237
- Code:0x11 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading or writing data for the current I/O request due to an error on the medium. The data could not be recovered.
- Probable Cause / Recommended Action: If the event is reported against a device other than a disk drive:
- Reformatting the medium may fix the problem.
- Alternatively, the medium in the device is flawed.
- If the medium is removable, replace the medium with a fresh one.
- Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary. If the event is reported against a disk drive on a system on which none or only some of the disks are in a redundant environment (i.e., mirrored)
- Review applications for errors at the time the event was reported to determine which data could not be read.
- Attempt to re-read the data.
- Re-write the data to the disk to allow the disk to reallocate to a spare area on the disk.
- If a re-read of the data and/or a rewrite of the data are not successful, the disk should be replaced and data restored from backup. If the event is reported against a disk drive on a system on which all disks are in a redundant environment (i.e., mirrored)
- When the OS is patched to current LVM and SCSI patches, reallocation will take place automatically for these disks, and no action needs be taken to check or replace these drives.
- To avoid unnecessary paging and notification, the severity of this event can be changed to MINOR_WARNING by enabling the alternate configuration for this event in /var/stm/config/tools/monitor/default_disk_em.clcfg (and /var/stm/config/tools/monitor/rst_disk_em.clcfg, if it exists)
- Find the following lines: EQ:100237:CRITICAL: and insert a "#" in column 1.
- Remove the "#" from column 1 of the line which starts: EQ:100237:MINOR_WARNING:
Event 100240
- Code:0x19 Qualifier:0x01 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x19 Qualifier:0x01 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x19 Qualifier:0x01 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so because the defect list was not available. The I/O request that necessitated this action may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100241
- Code:0x1c Qualifier:0x02 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x1c Qualifier:0x02 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x1c Qualifier:0x02 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so because the grown defect list was not found. The I/O request that necessitated this action may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: If this message appears during a format operation, the message is informational and no action need be taken.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100242
- Code:0x32 Qualifier:0x01 Key:0x03 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so because it could not update the defect list. The I/O request that necessitated this action may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100243
- Code:0x14 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request because it could not find the requested recorded entity on the medium. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100250
- Code:0x4a Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device driver received a command phase error from the device. The I/O request may have been processed in a way which could result in damage to or loss of data.
- Probable Cause / Recommended Action: The device could be in a state where it could not process the command. Cycle power to the device. If cycling device power does not correct the condition, perform a system shutdown. Cycle power to the computer and wait for it to reboot. If this does not correct the condition, the device has experienced a hardware failure. Repair or replace the device, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus to which this device is attached, the device adapter has experienced a hardware failure. Replace it.Event 100251
- Code:0xXX Qualifier:0xXX Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device driver has received an unspecified hardware error from the device.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Alternatively, if messages corresponding to this error appear in the log for more than one device on the same SCSI bus, the device adapter has experienced a hardware failure. Replace it.Event 100252
- Code:0x4b Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device driver received a data phase error from the device. The I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device could be in a state where it could not process the command. Cycle power to the device. If cycling device power does not correct the condition, perform a system shutdown. Cycle power to the computer and wait for it to reboot. If this does not correct the condition, the device has experienced a hardware failure. Repair or replace the device, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus to which this device is attached, the device adapter has experienced a hardware failure. Replace it.Event 100258
- Code:0x3b Qualifier:0x00 Key:0xXX Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to process an I/O request, the device reported a mechanical positioning error.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100266
- Code:0x09 Qualifier:0x03 Key:0x04 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x09 Qualifier:0x03 Key:0x04 Status:0xXX
- Device: CDROM
- Severity: CRITICAL
- Code:0x09 Qualifier:0x03 Key:0x04 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x09 Qualifier:0x03 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The servo mechanism that controls the spindle on the device has failed. The device is unusable.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100270
- Code:0x47 Qualifier:0x00 Key:0x0b Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device was unsuccessful in processing the current I/O request due to a SCSI parity error. Damage to or loss of data may have occurred.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus to which this device is attached, the device adapter has experienced a hardware failure. Replace it.Event 100271
- Code:0xXX Qualifier:0xXX Key:0x0b Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Code:0xXX Qualifier:0xXX Key:0x0b Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device aborted the command. The initiator may be able to recover by retrying the command.
- Probable Cause / Recommended Action: The device may have been powered off and may be being powered on.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, the total length of all cable segments on the SCSI bus exceeds 25 meters. Replace one or more cable segments until the total length is less than this value.
Alternatively, if all of the above fail to correct the problem, the device has experienced a hardware failure. Repair or replace it, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus, the device adapter may be in a state from which it cannot extract itself. Perform a system shutdown, cycle power to the computer and wait for it to reboot. If, after reboot, messages corresponding to this condition continue to appear in the log for this SCSI bus, replace the device adapter.Event 100272
- Code:0x04 Qualifier:0x01 Key:0x02 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Code:0x04 Qualifier:0x01 Key:0x02 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was not ready to process requests when it received a request from the device driver because it is in the process of becoming ready.
- Probable Cause / Recommended Action: The device may have been powered off and may be being powered on.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, the total length of all cable segments on the SCSI bus exceeds 25 meters. Replace one or more cable segments until the total length is less than this value.
Alternatively, if all of the above fail to correct the problem, the device has experienced a hardware failure. Repair or replace it, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus, the device adapter may be in a state from which it cannot extract itself. Perform a system shutdown, cycle power to the computer and wait for it to reboot. If, after reboot, messages corresponding to this condition continue to appear in the log for this SCSI bus, replace the device adapter.Event 100273
- Code:0x08 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was unsuccessful in its attempt to communicate with one of its logical units. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: A segment of the SCSI bus within the device may be damaged. Replace the damaged segment.
Alternatively, the logical unit may be powered down. Power it back up.
Alternatively, one or more of the SCSI cable segments within the device may have become disconnected. Reconnect them.
Alternatively, one or both terminators which belong at the ends of the device's SCSI bus may be missing. Replace them.
Alternatively, the logical unit has experienced a hardware failure and should be repaired or replaced, as necessary.Event 100276
- Code:0x1a Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current I/O request because the parameter list for the request had the wrong length. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100285
- Code:0x11 Qualifier:0x09 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request because it could not find a record gap on the medium. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100286
- Code:0x3b Qualifier:0x02 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to process a motion command, the device has encountered a tape positioning error at the end of the medium.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Alternatively, if replacing the medium does not correct the problem, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100287
- Code:0x50 Qualifier:0x01 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: While attempting to perform an appended write to its medium, the device encountered an error while positioning the medium for the write operation. Damage to or loss of data may have occurred.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100290
- Code:0x3b Qualifier:0x0e Key:0x05 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Physical media error
- Problem Description: The media changer was unsuccessful in moving a disk cassette out from a slot because that slot was empty.
- Probable Cause / Recommended Action: The cassette is mechanically flawed. Replaced the cassette with a fresh one.
Alternatively the picker, the source slot or the target slot has experienced a hardware problem and should be repaired.
Alternatively, the cassette may be jammed in the slot or the picker, preventing the operation. Remove it. This is an internal error, indicating that the installed version of the driver does not match that of the installed version of HP-UX. Install the correct version of the driver.Event 100293
- Code:0xXX Qualifier:0xXX Key:0x0d Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Code:0xXX Qualifier:0xXX Key:0x0d Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: An attempt was made to write data past the end of a partition on a device. The additional data was lost.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100294
- Code:0xXX Qualifier:0xXX Key:0x0e Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: An attempt was made to compare data on a medium with user data. The comparison failed.
- Probable Cause / Recommended Action: Rewriting the data is recommended. The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, the marginal area on the medium can be re-mapped to use a spare area on the medium manually.Event 100299
Event 100299 was replaced by Event 100999.
Event 100301
- Code:0xXX Qualifier:0xXX Key:0x0c Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: A request to search for data on a device was successful.
- Probable Cause / Recommended Action: No action is necessary.
Event 100308
- Code:0x3a Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Medium loaded or replaced
- Problem Description: The medium in the device has been loaded or replaced.
- Probable Cause / Recommended Action: A program had established a logical connection with the device at a time when no medium was present in it. An I/O operation was requested, then a medium was inserted.
Alternatively, the logical connection was established at a time when an unformatted medium was present in the device. This medium was removed and replaced with either the same or a different medium. No action is necessary.Event 100311
- Code:0xXX Qualifier:0xXX Key:0x07 Status:0xXX
- Device: ALL
- Severity: INFORMATION
- Event Summary: Medium in device cannot be used
- Problem Description: The device attempted to process a command that would write data to it, but was prevented from doing so because the medium was protected against that.
- Probable Cause / Recommended Action: If the device is of a type whose medium can be write protected, and it is desired to write data to that device, remove the protection.
Alternatively, the device may have experienced a hardware failure. Repair or replace it, as necessary.Event 100326
- Code:0x17 Qualifier:0x00 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it without using error correction. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 100330
- Code:0x5b Qualifier:0x02 Key:0x06 Status:0xXX
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Excessive errors for device
- Problem Description: An error log counter for the device has reached its maximum value.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100333
- Code:0x63 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: CDROM
- Severity: SERIOUS
- Code:0x63 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: While processing a command to read data from its medium, the device encountered the end of the user-recorded area on the current track.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100337
- Code:0x11 Qualifier:0x01 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request due to an error on the medium. The maximum number of retries were attempted and the data could not be read. The request was likely processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: If the event is reported against a device other than a disk drive:
- Reformatting the medium may fix the problem.
- Alternatively, the medium in the device is flawed.
- If the medium is removable, replace the medium with a fresh one.
- Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary. If the event is reported against a disk drive on a system on which none or only some of the disks are in a redundant environment (i.e., mirrored)
- Review applications for errors at the time the event was reported to determine which data could not be read.
- Attempt to re-read the data.
- Re-write the data to the disk to allow the disk to reallocate to a spare area on the disk.
- If a re-read of the data and/or a rewrite of the data are not successful, the disk should be replaced and data restored from backup. If the event is reported against a disk drive on a system on which all disks are in a redundant environment (i.e., mirrored)
- When the OS is patched to current LVM and SCSI patches, reallocation will take place automatically for these disks, and no action needs be taken to check or replace these drives.
- To avoid unnecessary paging and notification, the severity of this event can be changed to MINOR_WARNING by enabling the alternate configuration for this event in /var/stm/config/tools/monitor/default_disk_em.clcfg (and /var/stm/config/tools/monitor/rst_disk_em.clcfg, if it exists)
- Find the following lines: EQ:100337:CRITICAL:... and insert a "#" in column 1.
- Remove the "#" from column 1 of the line which starts: EQ:100337:MINOR_WARNING:...
Event 100340
- Code:0x19 Qualifier:0x02 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x19 Qualifier:0x02 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x19 Qualifier:0x02 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so due to an error in the primary defect list. The I/O request that necessitated this action may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100342
- Code:0x32 Qualifier:0x02 Key:0x03 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so because no defect spare location was available. The I/O request that necessitated this action may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100343
- Code:0x14 Qualifier:0x01 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request because it could not find the requested data record on the medium. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100372
- Code:0x04 Qualifier:0x02 Key:0x02 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Code:0x04 Qualifier:0x02 Key:0x02 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was not ready to process requests, initialization is required. This I/O request and all subsequent I/O requests directed to this device will not be processed.
- Probable Cause / Recommended Action: The device may have been powered off and may be being powered on.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, the total length of all cable segments on the SCSI bus exceeds 25 meters. Replace one or more cable segments until the total length is less than this value.
Alternatively, if all of the above fail to correct the problem, the device has experienced a hardware failure. Repair or replace it, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus, the device adapter may be in a state from which it cannot extract itself. Perform a system shutdown, cycle power to the computer and wait for it to reboot. If, after reboot, messages corresponding to this condition continue to appear in the log for this SCSI bus, replace the device adapter.Event 100373
- Code:0x41 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x41 Qualifier:0x00 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was unsuccessful in processing the current I/O request due to a data path failure. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: At least one segment of the SCSI bus may be damaged. Replace the damaged segment.
Alternatively, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100376
- Code:0x20 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current request message because the message contained an invalid command operation code. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100385
- Code:0x14 Qualifier:0x02 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request because it could not find the filemark or setmark on the medium.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100387
- Code:0x50 Qualifier:0x02 Key:0x04 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device was unsuccessful in processing the current I/O request due to a positioning error related to timing. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The device has experienced a hardware failure. Repair or replace the device, as necessary.
Event 100401
- Code:0xXX Qualifier:0xXX Key:0xXX Status:0x00
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: The device driver has successfully completed an I/O request.
- Probable Cause / Recommended Action: No action is necessary.
Event 100426
- Code:0x17 Qualifier:0x01 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it by retrying the read. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 100437
- Code:0x11 Qualifier:0x02 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request due to an error on the medium which was too many bits in length to correct. The request was likely processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100440
- Code:0x19 Qualifier:0x03 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x19 Qualifier:0x03 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x19 Qualifier:0x03 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so due to an error in the grown defect list. The I/O request that necessitated this action may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100472
- Code:0x04 Qualifier:0x03 Key:0x02 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Code:0x04 Qualifier:0x03 Key:0x02 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device is not in a state where it can process requests. Manual intervention is required.
- Probable Cause / Recommended Action: The device may have been powered off and may be being powered on.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, the total length of all cable segments on the SCSI bus exceeds 25 meters. Replace one or more cable segments until the total length is less than this value.
Alternatively, if all of the above fail to correct the problem, the device has experienced a hardware failure. Repair or replace it, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus, the device adapter may be in a state from which it cannot extract itself. Perform a system shutdown, cycle power to the computer and wait for it to reboot. If, after reboot, messages corresponding to this condition continue to appear in the log for this SCSI bus, replace the device adapter.Event 100476
- Code:0x21 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current request message because one or more of the logical block addresses for the request was outside the permissible range for the device. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100485
- Code:0x14 Qualifier:0x03 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request because it could not find the end of data on the medium.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100501
- Code:0xXX Qualifier:0xXX Key:0xXX Status:0x04
- Device: ALL
- Severity: INFORMATION
- Event Summary: Successful completion of operation
- Problem Description: An attempt to search for data or prefetch data on a device was successful.
- Probable Cause / Recommended Action: No action is necessary.
Event 100526
- Code:0x17 Qualifier:0x02 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it using a positive head offset on the medium. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 100537
- Code:0x11 Qualifier:0x04 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request due to an error on the medium. The data was not recovered, and an attempt to automatically reallocate the data failed. The request was likely processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100540
- Code:0x1c Qualifier:0x01 Key:0xXX Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x1c Qualifier:0x01 Key:0xXX Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x1c Qualifier:0x01 Key:0xXX Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to spare a block, the device failed to do so because the primary defect list was not found. The I/O request was not completed.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100572
- Code:0x08 Qualifier:0x01 Key:0x04 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was unsuccessful in its attempt to communicate with one of its logical units due to a time-out condition. The corresponding I/O request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: A segment of the SCSI bus within the device may be damaged. Replace the damaged segment.
Alternatively, the logical unit may be powered down. Power it back up.
Alternatively, one or more of the SCSI cable segments within the device may have become disconnected. Reconnect them.
Alternatively, one or both terminators which belong at the ends of the device's SCSI bus may be missing. Replace them.
Alternatively, the logical unit has experienced a hardware failure and should be repaired or replaced, as necessary.Event 100576
- Code:0x21 Qualifier:0x01 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The media changer was unsuccessful in processing the current request message because it would have accessed an invalid element. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100585
- Code:0x14 Qualifier:0x04 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request because due to a block sequence error on the medium.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100626
- Code:0x17 Qualifier:0x03 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it using a negative head offset on the medium. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 100637
- Code:0x11 Qualifier:0x05 Key:0x03 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x11 Qualifier:0x05 Key:0x03 Status:0xXX
- Device: CDROM
- Severity: CRITICAL
- Code:0x11 Qualifier:0x05 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x11 Qualifier:0x05 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading data for the current I/O request due to an uncorrectable error on the medium. The request was likely processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100672
- Code:0x25 Qualifier:0x01 Key:0x05 Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Event Summary: Recovered error
- Problem Description: The High Availability Logical Unit is a global hot spare. It cannot be accessed for data operation from the host. The device was unsuccessful in processing the current I/O request because the request contained a logical unit number, which is not supported for this device. The request was not processed.
- Probable Cause / Recommended Action: This is an internal error. It indicates that the device is experiencing problems. Please contact H-P support person.
Event 100676
- Code:0x22 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current I/O request because the request contained an illegal function code. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100685
- Code:0x2d Qualifier:0x00 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in writing data for the current I/O request due to an overwrite error during an in-place update on the medium. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100726
- Code:0x17 Qualifier:0x04 Key:0x01 Status:0xXX
- Device: WORM
- Severity: MINOR_WARNING
- Code:0x17 Qualifier:0x04 Key:0x01 Status:0xXX
- Device: CDROM
- Severity: MINOR_WARNING
- Code:0x17 Qualifier:0x04 Key:0x01 Status:0xXX
- Device:OPTICAL
- Severity: MINOR_WARNING
- Code:0x17 Qualifier:0x04 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it by retrying the read and/or applying the CIRC method. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 100737
- Code:0x11 Qualifier:0x07 Key:0xXX Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x11 Qualifier:0x07 Key:0xXX Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x11 Qualifier:0x07 Key:0xXX Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading or writing data for the current I/O request due to a data synchronization error on the medium. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100772
- Code:0x29 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: TAPE
- Severity: INFORMATION
- Code:0x29 Qualifier:0x00 Key:0x06 Status:0xXX
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Device connectivity or hardware failure
- Problem Description: A Power On, Reset or Bus Device Reset has occurred for the device.
- Probable Cause / Recommended Action: The device may have been powered off and may be being powered on.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, the total length of all cable segments on the SCSI bus exceeds 25 meters. Replace one or more cable segments until the total length is less than this value.
Alternatively, if all of the above fail to correct the problem, the device has experienced a hardware failure. Repair or replace it, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus, the device adapter may be in a state from which it cannot extract itself. Perform a system shutdown, cycle power to the computer and wait for it to reboot. If, after reboot, messages corresponding to this condition continue to appear in the log for this SCSI bus, replace the device adapter.Event 100776
- Code:0x24 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current request message because the message contained an invalid field in the command data block. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100785
- Code:0x30 Qualifier:0x01 Key:0x03 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading the data for the current I/O request because the medium has an unknown format.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100826
- Code:0x17 Qualifier:0x05 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it using the previous sector identifier on the medium. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 100837
- Code:0x11 Qualifier:0x0b Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading the data for the current I/O request. Reassignment to a spare area on the medium is recommended.
- Probable Cause / Recommended Action: Rewriting the data is recommended. The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, the marginal area on the medium can be re-mapped to use a spare area on the medium manually.- Details: The combination of Additional Sense Code and Sense Qualifier (0x110b) indicates: Unrecovered read error. Recommend reassignment.
Event 100872
- Code:0x48 Qualifier:0x00 Key:0x0b Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The device aborted the command. The initiator may be able to recover by retrying the command.
- Probable Cause / Recommended Action: If the device is a removable medium, this message is informational, indicating that I/O was attempted when a diskette was not inserted in the drive. Place a diskette in the drive before trying to use it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, if another entry corresponding to this condition appears in the log for this device, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 100876
- Code:0x25 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current I/O request because the request contained a logical unit number, which is not supported for this device. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100885
- Code:0x33 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to process an I/O request, the device has encountered a tape length error. The request may have been processed in a way which could cause damage to or loss of data.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100926
- Code:0x17 Qualifier:0x06 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MINOR_WARNING
- Code:0x17 Qualifier:0x06 Key:0x01 Status:0xXX
- Device: WORM
- Severity: MINOR_WARNING
- Code:0x17 Qualifier:0x06 Key:0x01 Status:0xXX
- Device:OPTICAL
- Severity: MINOR_WARNING
- Code:0x17 Qualifier:0x06 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it and automatically reallocate it to the spare area on the medium without using the ECC method. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 100937
- Code:0x11 Qualifier:0x0c Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading the data for the current I/O request. Rewriting the data is recommended.
- Probable Cause / Recommended Action: Rewriting the data is recommended. The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, the marginal area on the medium can be re-mapped to use a spare area on the medium manually.- Details: The combination of Additional Sense Code and Sense Qualifier (0x110c) indicates: Unrecovered read error. Recommend rewrite.
Event 100972
- Code:0x5d Qualifier:0x00 Key:0x01 Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Event Summary: Recovered error
- Problem Description: The Storage Processor of High Availability Disk Array is returning an unsolicited Sense Block to the host. The I/O request was not completed.
- Probable Cause / Recommended Action: There may be a device specific error, such as a fan or power-supply failure.
Event 100976
- Code:0x26 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current request message because the message contained an invalid field in the command parameter list. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 100985
- Code:0x50 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in performing an appended write to its medium. The medium may be unusable.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 100999
- Code:0x00 Qualifier:0x00 Key:0x00 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Software configuration error
- Problem Description: The SCSI status and sense data provided by the device did not match known good combinations and so, could not be decoded into a specific cause/action. This could be because the sense data coming back from the device differs from the SCSI specification (which is unlikely if it is an HP supported device), or it could be due to a defect in the decoding module. The full text of this error should be reported back to HP for analysis.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause a problem in the operation of the device.
Event 101026
- Code:0x17 Qualifier:0x07 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Code:0x17 Qualifier:0x07 Key:0x01 Status:0xXX
- Device: WORM
- Severity: MAJOR_WARNING
- Code:0x17 Qualifier:0x07 Key:0x01 Status:0xXX
- Device:OPTICAL
- Severity: MAJOR_WARNING
- Code:0x17 Qualifier:0x07 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it. The requested data was successfully returned. Reassignment to a spare area on the medium is recommended.
- Probable Cause / Recommended Action: Reassignment to a spare area on the medium is recommended.
Event 101037
- Code:0x16 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Code:0x16 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: WORM
- Severity: CRITICAL
- Code:0x16 Qualifier:0x00 Key:0x03 Status:0xXX
- Device:OPTICAL
- Severity: CRITICAL
- Code:0x16 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading or writing data for the current I/O request due to a data synchronization mark error on the medium.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 101072
- Code:0xXX Qualifier:0xXX Key:0x02 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Device connectivity or hardware failure
- Problem Description: The device was not ready to process requests when it received a request from the device driver.
- Probable Cause / Recommended Action: The device may have been powered off and may be being powered on.
Alternatively, one or both of the terminators on the SCSI bus may be missing. Install the terminators in their proper locations at the ends of the SCSI bus.
Alternatively, the SCSI cable may have become detached from the device. Re-attach the cable.
Alternatively, the SCSI cable may have failed. Replace it.
Alternatively, the device may be in a state where it could not process this, or any, request. Cycle power to the device.
Alternatively, there could be more than one device having the same address on the SCSI bus. Make all the addresses on the SCSI bus unique.
Alternatively, the total length of all cable segments on the SCSI bus exceeds 25 meters. Replace one or more cable segments until the total length is less than this value.
Alternatively, if all of the above fail to correct the problem, the device has experienced a hardware failure. Repair or replace it, as necessary.
Alternatively, if messages corresponding to this condition appear in the log for more than one device on the SCSI bus, the device adapter may be in a state from which it cannot extract itself. Perform a system shutdown, cycle power to the computer and wait for it to reboot. If, after reboot, messages corresponding to this condition continue to appear in the log for this SCSI bus, replace the device adapter.Event 101076
- Code:0x26 Qualifier:0x01 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current I/O request because a parameter in the request is not supported for this type of request. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 101085
- Code:0x51 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in erasing the requested field of its medium. The medium may be unusable.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 101126
- Code:0x17 Qualifier:0x08 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Code:0x17 Qualifier:0x08 Key:0x01 Status:0xXX
- Device: WORM
- Severity: MAJOR_WARNING
- Code:0x17 Qualifier:0x08 Key:0x01 Status:0xXX
- Device:OPTICAL
- Severity: MAJOR_WARNING
- Code:0x17 Qualifier:0x08 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MAJOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it. The requested data was successfully returned. Rewriting the data is recommended.
- Probable Cause / Recommended Action: Rewrite of the data on the medium is recommended.
Event 101137
- Code:0xXX Qualifier:0xXX Key:0x03 Status:0xXX
- Device: ALL
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: The device was unsuccessful in reading or writing data for the current I/O request due to an error on the medium. The data could not be recovered.
- Probable Cause / Recommended Action: Reformatting the medium may fix the problem.
Alternatively, the medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, if the medium is not removable, the device has experienced a hardware failure. Repair or replace the device, as necessary.Event 101176
- Code:0x26 Qualifier:0x02 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current I/O request because a parameter in the request had an invalid value. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 101185
- Code:0x52 Qualifier:0x00 Key:0x03 Status:0xXX
- Device: TAPE
- Severity: CRITICAL
- Event Summary: Media failure
- Problem Description: While attempting to access its medium, the device reported a cartridge fault. I/O to this medium is not possible.
- Probable Cause / Recommended Action: The medium in the device is flawed. Replace the medium with a fresh one.
Event 101226
- Code:0x18 Qualifier:0x00 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to use error correction methods to recover it. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 101276
- Code:0x26 Qualifier:0x03 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: An attempt was made to set logging threshold parameters for the device but was unsuccessful because the device does not support threshold parameters. The desired logging may not be performed by the device.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 101326
- Code:0x18 Qualifier:0x01 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to use error correction methods and retries to recover it. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 101376
- Code:0x27 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The initiator (host) is attempting to download drive firmware without disabling the peer Storage Processor of High Availability Disk Array. The I/O request was not completed.
- Probable Cause / Recommended Action: An operational peer Storage Processor of High Availability Disk Array exists in the array. Please disable the peer during drive firmware download operation and re-try the operation. Also, do not enable the peer while the download is in progress. Doing so may result in drive failure and/or data loss.
Event 101426
- Code:0x18 Qualifier:0x02 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it and automatically reallocate it to the spare area on the medium. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 101476
- Code:0x2c Qualifier:0x00 Key:0x0b Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The initiator (host) has passed an invalid sequence of commands to the Storage Processor of High Availability Disk Array. The I/O request was not completed.
- Probable Cause / Recommended Action: This is an internal error. It indicates that the device is experiencing problems. Please contact H-P support person.
Event 101526
- Code:0x18 Qualifier:0x03 Key:0x01 Status:0xXX
- Device: CDROM
- Severity: MINOR_WARNING
- Code:0x18 Qualifier:0x03 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it using the CIRC method. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 101576
- Code:0x3a Qualifier:0x00 Key:0x05 Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Event Summary: Software configuration error
- Problem Description: The initiator (host) is performing a microcode download operation but there are no disk drives to which the Storage Processor of High Availability Disk Array can appropriately install the download. The I/O request was not completed.
- Probable Cause / Recommended Action: The High Availability Disk Array contains no operational disk drive which are compatible with the firmware/microcode being downloaded. No further action is necessary.
Event 101626
- Code:0x18 Qualifier:0x04 Key:0x01 Status:0xXX
- Device: CDROM
- Severity: MINOR_WARNING
- Code:0x18 Qualifier:0x04 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it using the L-EC method. The requested data was successfully returned.
- Probable Cause / Recommended Action: No action is necessary.
Event 101676
- Code:0x3d Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current identification request message because the message contained invalid bits. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 101726
- Code:0x18 Qualifier:0x05 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it. The requested data was successfully returned. Reassignment to a spare area on the medium is recommended.
- Probable Cause / Recommended Action: Reassignment to a spare area on the medium is recommended.
- Details: The combination of Additional Sense Code and Sense Qualifier (0x1805) indicates: Recovered data. Recommend reassign.
Event 101776
- Code:0x43 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Code:0x43 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current request message. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 101826
- Code:0x18 Qualifier:0x06 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MAJOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it. The requested data was successfully returned. Rewriting the data is recommended.
- Probable Cause / Recommended Action: Rewrite of the data on the medium is recommended.
- Details: The combination of Additional Sense Code and Sense Qualifier (0x1806) indicates: Recovered data. Recommend rewrite.
Event 101876
- Code:0x43 Qualifier:0x00 Key:0x0b Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The I/O request was not completed because incorrect command was passed to the Storage Processor of High Availability Disk Array by the initiator (host).
- Probable Cause / Recommended Action: This is an internal error. It indicates that the device is experiencing problems. Please contact H-P support person.
Event 101926
- Code:0x1e Qualifier:0x00 Key:0x01 Status:0xXX
- Device: DISK
- Severity: MINOR_WARNING
- Code:0x1e Qualifier:0x00 Key:0x01 Status:0xXX
- Device: WORM
- Severity: MINOR_WARNING
- Code:0x1e Qualifier:0x00 Key:0x01 Status:0xXX
- Device:OPTICAL
- Severity: MINOR_WARNING
- Code:0x1e Qualifier:0x00 Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it by recovering the block identifier using the ECC method. The requested data was successfully returned.
- Probable Cause / Recommended Action: Rewriting the data is recommended. The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, the marginal area on the medium can be re-mapped to use a spare area on the medium manually.Event 101976
- Code:0x49 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: DISK
- Severity: SERIOUS
- Code:0x49 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current request message because the form of the message was invalid. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 102026
- Code:0xXX Qualifier:0xXX Key:0x01 Status:0xXX
- Device: ALL
- Severity: MINOR_WARNING
- Event Summary: Recoverable read error
- Problem Description: The device was unsuccessful in its first attempt at reading the data requested in an I/O request, but was able to recover it. The requested data was successfully returned.
- Probable Cause / Recommended Action: Rewriting the data is recommended. The medium in the device is flawed. If the medium is removable, replace the medium with a fresh one.
Alternatively, the marginal area on the medium can be re-mapped to use a spare area on the medium manually.Event 102076
- Code:0x4e Qualifier:0x00 Key:0x0b Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Event Summary: Hardware failure
- Problem Description: The I/O request was not completed because the logical unit encountered "Incorrect Initiator Connection".
- Probable Cause / Recommended Action: This is an internal error. It indicates that the device is experiencing problems. Please contact H-P support person.
Event 102176
- Code:0x58 Qualifier:0x00 Key:0x05 Status:0xXX
- Device:OPTICAL
- Severity: SERIOUS
- Code:0x58 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The optical storage device was unsuccessful in processing the current I/O request because the request attempted to access a non-existent generation of data on the medium. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 102276
- Code:0x64 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: CDROM
- Severity: SERIOUS
- Code:0x64 Qualifier:0x00 Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current I/O request because the request contained an illegal mode value for the desired track. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 102376
- Code:0x80 Qualifier:0x01 Key:0x06 Status:0xXX
- Device: DISK
- Severity: CRITICAL
- Event Summary: Hardware configuration error
- Problem Description: The SCSI Reservation for this logical unit has been changed by a Force Reserve operation.
- Probable Cause / Recommended Action: This is an internal error. It indicates that the device is experiencing problems. Please contact H-P support person.
Event 102476
- Code:0xXX Qualifier:0xXX Key:0x05 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device was unsuccessful in processing the current request message. The request was not processed.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 102576
- Code:0xXX Qualifier:0xXX Key:0x09 Status:0xXX
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: The device driver has received an unspecified vendor-specific message from the device.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
Event 102676
- Code:0xXX Qualifier:0xXX Key:0xXX Status:0x02
- Device: ALL
- Severity: SERIOUS
- Event Summary: Software configuration error
- Problem Description: A condition has occurred for which SCSI sense data is available. The device driver has not requested the sense data.
- Probable Cause / Recommended Action: The error most likely indicates that the device is not fully supported by the current driver. This may or may not cause problem in operation of the device.
SCSI Events, Sorted by Sense Code, etc.
The following table lists all the SCSI events by Sense Code, Qualifier, Key, and Status.Click on the hyperlink for the Event Number to go to the complete description of the event.
Abbreviations used in the table:
C = SCSI Sense Code ("Additional Sense Code")
Q = Qualifier ("Additonal Sense Qualifier")
K = Key ("Sense Key")
S = Status ("SCSI Status")
Dev = Device Class
Sev = Severity Level
CORRECT
DEVICE COMBINATION
C:0x00 Q:0x00 K:0x00 S:0xXX Event 100101 Dev:
ALL Sev:INFO
C:0x00 Q:0x01 K:0x06 S:0xXX Event 100077 Dev:
TAPE Sev:INFO
C:0x00 Q:0x02 K:0x06 S:0xXX Event 100078 Dev:
TAPE Sev:INFO
C:0x00 Q:0x03 K:0x06 S:0xXX Event 100079 Dev:
TAPE Sev:INFO
C:0x00 Q:0x04 K:0x06 S:0xXX Event 100080 Dev:
TAPE Sev:INFO
C:0x00 Q:0x05 K:0x04 S:0xXX Event 100081 Dev:
TAPE Sev:INFO
C:0x00 Q:0x06 K:0x06 S:0xXX Event 100152 Dev:
ALL Sev:CRIT
C:0x00 Q:0x06 K:0x0b S:0xXX Event 100176 Dev:
DISK Sev:SERIOUS
C:0x00 Q:0x11 K:0x00 S:0xXX Event 100013 Dev:
CDROM Sev:INFO
C:0x00 Q:0x12 K:0x00 S:0xXX Event 100014 Dev:
CDROM Sev:INFO
C:0x00 Q:0x13 K:0x00 S:0xXX Event 100015 Dev:
CDROM Sev:INFO
C:0x00 Q:0x14 K:0x00 S:0xXX Event 100046 Dev:
CDROM Sev:MINORWARN
C:0x00 Q:0x15 K:0x00 S:0xXX Event 100016 Dev:
CDROM Sev:INFO
C:0x01 Q:0x00 K:0x04 S:0xXX Event 100061 Dev:
DISK Sev:CRIT
C:0x01 Q:0x00 K:0x04 S:0xXX Event 100061 Dev:
WORM Sev:CRIT
C:0x01 Q:0x00 K:0x04 S:0xXX Event 100061
Dev:OPTICAL Sev:CRIT
C:0x01 Q:0x00 K:0x04 S:0xXX Event 100061 Dev:
ALL Sev:CRIT
C:0x02 Q:0x00 K:0x04 S:0xXX Event 100062 Dev:
DISK Sev:CRIT
C:0x02 Q:0x00 K:0x04 S:0xXX Event 100062 Dev:
WORM Sev:CRIT
C:0x02 Q:0x00 K:0x04 S:0xXX Event 100062 Dev:
CDROM Sev:CRIT
C:0x02 Q:0x00 K:0x04 S:0xXX Event 100062
Dev:OPTICAL Sev:CRIT
C:0x02 Q:0x00 K:0x04 S:0xXX Event 100062
Dev:CHANGER Sev:CRIT
C:0x02 Q:0x00 K:0x04 S:0xXX Event 100062 Dev:
ALL Sev:CRIT
C:0x03 Q:0x00 K:0x04 S:0xXX Event 100063 Dev:
ALL Sev:CRIT
C:0x03 Q:0x01 K:0x04 S:0xXX Event 100082 Dev:
TAPE Sev:CRIT
C:0x03 Q:0x02 K:0x04 S:0xXX Event 100083 Dev:
TAPE Sev:CRIT
C:0x04 Q:0x00 K:0x02 S:0xXX Event 100172 Dev:
TAPE Sev:INFO
C:0x04 Q:0x00 K:0x02 S:0xXX Event 100172 Dev:
ALL Sev:SERIOUS
C:0x04 Q:0x00 K:0x05 S:0xXX Event 100173 Dev:
DISK Sev:CRIT
C:0x04 Q:0x01 K:0x02 S:0xXX Event 100272 Dev:
TAPE Sev:INFO
C:0x04 Q:0x01 K:0x02 S:0xXX Event 100272 Dev:
ALL Sev:SERIOUS
C:0x04 Q:0x02 K:0x02 S:0xXX Event 100372 Dev:
TAPE Sev:INFO
C:0x04 Q:0x02 K:0x02 S:0xXX Event 100372 Dev:
ALL Sev:SERIOUS
C:0x04 Q:0x03 K:0x02 S:0xXX Event 100472 Dev:
TAPE Sev:INFO
C:0x04 Q:0x03 K:0x02 S:0xXX Event 100472 Dev:
ALL Sev:SERIOUS
C:0x04 Q:0x04 K:0x02 S:0xXX Event 100028 Dev:
ALL Sev:MINORWARN
C:0x05 Q:0x00 K:0x04 S:0xXX Event 100074 Dev:
ALL Sev:CRIT
C:0x06 Q:0x00 K:0x03 S:0xXX Event 100143 Dev:
ALL Sev:CRIT
C:0x07 Q:0x00 K:0x04 S:0xXX Event 100035 Dev:
ALL Sev:CRIT
C:0x08 Q:0x00 K:0x04 S:0xXX Event 100273 Dev:
ALL Sev:CRIT
C:0x08 Q:0x01 K:0x04 S:0xXX Event 100572 Dev:
ALL Sev:CRIT
C:0x08 Q:0x02 K:0x04 S:0xXX Event 100075 Dev:
ALL Sev:CRIT
C:0x09 Q:0x00 K:0x06 S:0xXX Event 100064 Dev:
DISK Sev:CRIT
C:0x09 Q:0x00 K:0x06 S:0xXX Event 100064 Dev:
ALL Sev:CRIT
C:0x09 Q:0x01 K:0x06 S:0xXX Event 100065 Dev:
ALL Sev:CRIT
C:0x09 Q:0x02 K:0x06 S:0xXX Event 100166 Dev:
WORM Sev:CRIT
C:0x09 Q:0x02 K:0x06 S:0xXX Event 100166 Dev:
CDROM Sev:CRIT
C:0x09 Q:0x02 K:0x06 S:0xXX Event 100166
Dev:OPTICAL Sev:CRIT
C:0x09 Q:0x02 K:0x06 S:0xXX Event 100166 Dev:
ALL Sev:CRIT
C:0x09 Q:0x03 K:0x04 S:0xXX Event 100266 Dev:
WORM Sev:CRIT
C:0x09 Q:0x03 K:0x04 S:0xXX Event 100266 Dev:
CDROM Sev:CRIT
C:0x09 Q:0x03 K:0x04 S:0xXX Event 100266
Dev:OPTICAL Sev:CRIT
C:0x09 Q:0x03 K:0x04 S:0xXX Event 100266 Dev:
ALL Sev:CRIT
C:0x0a Q:0x00 K:0x06 S:0xXX Event 100130 Dev:
ALL Sev:SERIOUS
C:0x0c Q:0x00 K:0x03 S:0xXX Event 100084 Dev:
ALL Sev:CRIT
C:0x0c Q:0x01 K:0x01 S:0xXX Event 100126 Dev:
ALL Sev:INFO
C:0x0c Q:0x02 K:0x03 S:0xXX Event 100137 Dev:
ALL Sev:CRIT
C:0x10 Q:0x00 K:0x04 S:0xXX Event 100053 Dev:
DISK Sev:CRIT
C:0x10 Q:0x00 K:0x04 S:0xXX Event 100053 Dev:
WORM Sev:CRIT
C:0x10 Q:0x00 K:0x04 S:0xXX Event 100053
Dev:OPTICAL Sev:CRIT
C:0x10 Q:0x00 K:0x04 S:0xXX Event 100053 Dev:
ALL Sev:CRIT
C:0x11 Q:0x00 K:0x03 S:0xXX Event 100237 Dev:
ALL Sev:CRIT
C:0x11 Q:0x01 K:0x03 S:0xXX Event 100337 Dev:
ALL Sev:CRIT
C:0x11 Q:0x02 K:0x03 S:0xXX Event 100437 Dev:
ALL Sev:CRIT
C:0x11 Q:0x03 K:0x04 S:0xXX Event 100056 Dev:
ALL Sev:CRIT
C:0x11 Q:0x04 K:0x03 S:0xXX Event 100537 Dev:
ALL Sev:CRIT
C:0x11 Q:0x05 K:0x03 S:0xXX Event 100637 Dev:
WORM Sev:CRIT
C:0x11 Q:0x05 K:0x03 S:0xXX Event 100637 Dev:
CDROM Sev:CRIT
C:0x11 Q:0x05 K:0x03 S:0xXX Event 100637
Dev:OPTICAL Sev:CRIT
C:0x11 Q:0x05 K:0x03 S:0xXX Event 100637 Dev:
ALL Sev:CRIT
C:0x11 Q:0x06 K:0xXX S:0xXX Event 100226 Dev:
ALL Sev:CRIT
C:0x11 Q:0x07 K:0xXX S:0xXX Event 100737 Dev:
WORM Sev:CRIT
C:0x11 Q:0x07 K:0xXX S:0xXX Event 100737
Dev:OPTICAL Sev:CRIT
C:0x11 Q:0x07 K:0xXX S:0xXX Event 100737 Dev:
ALL Sev:CRIT
C:0x11 Q:0x08 K:0x03 S:0xXX Event 100185 Dev:
TAPE Sev:CRIT
C:0x11 Q:0x09 K:0x03 S:0xXX Event 100285 Dev:
TAPE Sev:CRIT
C:0x11 Q:0x0a K:0x04 S:0xXX Event 100050 Dev:
ALL Sev:CRIT
C:0x11 Q:0x0b K:0x03 S:0xXX Event 100837 Dev:
ALL Sev:CRIT
C:0x11 Q:0x0c K:0x03 S:0xXX Event 100937 Dev:
ALL Sev:CRIT
C:0x12 Q:0x00 K:0x03 S:0xXX Event 100136 Dev:
DISK Sev:CRIT
C:0x12 Q:0x00 K:0x03 S:0xXX Event 100136 Dev:
WORM Sev:CRIT
C:0x12 Q:0x00 K:0x03 S:0xXX Event 100136 Dev:
ALL Sev:CRIT
C:0x13 Q:0x00 K:0x03 S:0xXX Event 100236 Dev:
DISK Sev:CRIT
C:0x13 Q:0x00 K:0x03 S:0xXX Event 100236 Dev:
WORM Sev:CRIT
C:0x13 Q:0x00 K:0x03 S:0xXX Event 100236
Dev:OPTICAL Sev:CRIT
C:0x13 Q:0x00 K:0x03 S:0xXX Event 100236 Dev:
ALL Sev:CRIT
C:0x14 Q:0x00 K:0x03 S:0xXX Event 100243 Dev:
ALL Sev:CRIT
C:0x14 Q:0x01 K:0x03 S:0xXX Event 100343 Dev:
ALL Sev:CRIT
C:0x14 Q:0x02 K:0x03 S:0xXX Event 100385 Dev:
TAPE Sev:CRIT
C:0x14 Q:0x03 K:0x03 S:0xXX Event 100485 Dev:
TAPE Sev:CRIT
C:0x14 Q:0x04 K:0x03 S:0xXX Event 100585 Dev:
TAPE Sev:CRIT
C:0x15 Q:0x00 K:0x04 S:0xXX Event 100060 Dev:
ALL Sev:CRIT
C:0x15 Q:0x01 K:0x04 S:0xXX Event 100158 Dev:
ALL Sev:CRIT
C:0x15 Q:0x02 K:0x04 S:0xXX Event 100059 Dev:
ALL Sev:CRIT
C:0x16 Q:0x00 K:0x03 S:0xXX Event 101037 Dev:
DISK Sev:CRIT
C:0x16 Q:0x00 K:0x03 S:0xXX Event 101037 Dev:
WORM Sev:CRIT
C:0x16 Q:0x00 K:0x03 S:0xXX Event 101037
Dev:OPTICAL Sev:CRIT
C:0x16 Q:0x00 K:0x03 S:0xXX Event 101037 Dev:
ALL Sev:CRIT
C:0x17 Q:0x00 K:0x01 S:0xXX Event 100326 Dev:
ALL Sev:MINORWARN
C:0x17 Q:0x01 K:0x01 S:0xXX Event 100426 Dev:
ALL Sev:MINORWARN
C:0x17 Q:0x02 K:0x01 S:0xXX Event 100526 Dev:
ALL Sev:MINORWARN
C:0x17 Q:0x03 K:0x01 S:0xXX Event 100626 Dev:
ALL Sev:MINORWARN
C:0x17 Q:0x04 K:0x01 S:0xXX Event 100726 Dev:
WORM Sev:MINORWARN
C:0x17 Q:0x04 K:0x01 S:0xXX Event 100726 Dev:
CDROM Sev:MINORWARN
C:0x17 Q:0x04 K:0x01 S:0xXX Event 100726
Dev:OPTICAL Sev:MINORWARN
C:0x17 Q:0x04 K:0x01 S:0xXX Event 100726 Dev:
ALL Sev:MINORWARN
C:0x17 Q:0x05 K:0x01 S:0xXX Event 100826 Dev:
DISK Sev:MINORWARN
C:0x17 Q:0x06 K:0x01 S:0xXX Event 100926 Dev:
DISK Sev:MINORWARN
C:0x17 Q:0x06 K:0x01 S:0xXX Event 100926 Dev:
WORM Sev:MINORWARN
C:0x17 Q:0x06 K:0x01 S:0xXX Event 100926
Dev:OPTICAL Sev:MINORWARN
C:0x17 Q:0x06 K:0x01 S:0xXX Event 100926 Dev:
ALL Sev:MINORWARN
C:0x17 Q:0x07 K:0x01 S:0xXX Event 101026 Dev:
DISK Sev:MAJORWARN
C:0x17 Q:0x07 K:0x01 S:0xXX Event 101026 Dev:
WORM Sev:MAJORWARN
C:0x17 Q:0x07 K:0x01 S:0xXX Event 101026
Dev:OPTICAL Sev:MAJORWARN
C:0x17 Q:0x07 K:0x01 S:0xXX Event 101026 Dev:
ALL Sev:MAJORWARN
C:0x17 Q:0x08 K:0x01 S:0xXX Event 101126 Dev:
DISK Sev:MAJORWARN
C:0x17 Q:0x08 K:0x01 S:0xXX Event 101126 Dev:
WORM Sev:MAJORWARN
C:0x17 Q:0x08 K:0x01 S:0xXX Event 101126
Dev:OPTICAL Sev:MAJORWARN
C:0x17 Q:0x08 K:0x01 S:0xXX Event 101126 Dev:
ALL Sev:MAJORWARN
C:0x18 Q:0x00 K:0x01 S:0xXX Event 101226 Dev:
DISK Sev:MINORWARN
C:0x18 Q:0x01 K:0x01 S:0xXX Event 101326 Dev:
DISK Sev:MINORWARN
C:0x18 Q:0x02 K:0x01 S:0xXX Event 101426 Dev:
DISK Sev:MINORWARN
C:0x18 Q:0x03 K:0x01 S:0xXX Event 101526 Dev:
CDROM Sev:MINORWARN
C:0x18 Q:0x03 K:0x01 S:0xXX Event 101526 Dev:
ALL Sev:MINORWARN
C:0x18 Q:0x04 K:0x01 S:0xXX Event 101626 Dev:
CDROM Sev:MINORWARN
C:0x18 Q:0x05 K:0x01 S:0xXX Event 101726 Dev:
DISK Sev:MAJORWARN
C:0x18 Q:0x06 K:0x01 S:0xXX Event 101826 Dev:
DISK Sev:MAJORWARN
C:0x19 Q:0x00 K:0x03 S:0xXX Event 100140 Dev:
DISK Sev:CRIT
C:0x19 Q:0x00 K:0x03 S:0xXX Event 100140
Dev:OPTICAL Sev:CRIT
C:0x19 Q:0x00 K:0x03 S:0xXX Event 100140 Dev:
ALL Sev:CRIT
C:0x19 Q:0x01 K:0x03 S:0xXX Event 100240 Dev:
DISK Sev:CRIT
C:0x19 Q:0x01 K:0x03 S:0xXX Event 100240
Dev:OPTICAL Sev:CRIT
C:0x19 Q:0x01 K:0x03 S:0xXX Event 100240 Dev:
ALL Sev:CRIT
C:0x19 Q:0x02 K:0x03 S:0xXX Event 100340 Dev:
DISK Sev:CRIT
C:0x19 Q:0x02 K:0x03 S:0xXX Event 100340
Dev:OPTICAL Sev:CRIT
C:0x19 Q:0x02 K:0x03 S:0xXX Event 100340 Dev:
ALL Sev:CRIT
C:0x19 Q:0x03 K:0x03 S:0xXX Event 100440 Dev:
DISK Sev:CRIT
C:0x19 Q:0x03 K:0x03 S:0xXX Event 100440
Dev:OPTICAL Sev:CRIT
C:0x19 Q:0x03 K:0x03 S:0xXX Event 100440 Dev:
ALL Sev:CRIT
C:0x1a Q:0x00 K:0x05 S:0xXX Event 100276 Dev:
ALL Sev:SERIOUS
C:0x1b Q:0x00 K:0x06 S:0xXX Event 100151 Dev:
ALL Sev:CRIT
C:0x1c Q:0x00 K:0x03 S:0xXX Event 100141 Dev:
DISK Sev:CRIT
C:0x1c Q:0x00 K:0x03 S:0xXX Event 100141
Dev:OPTICAL Sev:CRIT
C:0x1c Q:0x00 K:0x03 S:0xXX Event 100141 Dev:
ALL Sev:CRIT
C:0x1c Q:0x01 K:0xXX S:0xXX Event 100540 Dev:
DISK Sev:CRIT
C:0x1c Q:0x01 K:0xXX S:0xXX Event 100540
Dev:OPTICAL Sev:CRIT
C:0x1c Q:0x01 K:0xXX S:0xXX Event 100540 Dev:
ALL Sev:CRIT
C:0x1c Q:0x02 K:0x03 S:0xXX Event 100241 Dev:
DISK Sev:CRIT
C:0x1c Q:0x02 K:0x03 S:0xXX Event 100241
Dev:OPTICAL Sev:CRIT
C:0x1c Q:0x02 K:0x03 S:0xXX Event 100241 Dev:
ALL Sev:CRIT
C:0x1d Q:0x00 K:0xXX S:0xXX Event 100194 Dev:
DISK Sev:CRIT
C:0x1d Q:0x00 K:0xXX S:0xXX Event 100194 Dev:
WORM Sev:CRIT
C:0x1d Q:0x00 K:0xXX S:0xXX Event 100194
Dev:OPTICAL Sev:CRIT
C:0x1e Q:0x00 K:0x01 S:0xXX Event 101926 Dev:
DISK Sev:MINORWARN
C:0x1e Q:0x00 K:0x01 S:0xXX Event 101926 Dev:
WORM Sev:MINORWARN
C:0x1e Q:0x00 K:0x01 S:0xXX Event 101926
Dev:OPTICAL Sev:MINORWARN
C:0x1e Q:0x00 K:0x01 S:0xXX Event 101926 Dev:
ALL Sev:MINORWARN
C:0x20 Q:0x00 K:0x05 S:0xXX Event 100376 Dev:
ALL Sev:SERIOUS
C:0x21 Q:0x00 K:0x05 S:0xXX Event 100476 Dev:
ALL Sev:SERIOUS
C:0x21 Q:0x01 K:0x05 S:0xXX Event 100576 Dev:
ALL Sev:SERIOUS
C:0x22 Q:0x00 K:0x05 S:0xXX Event 100676 Dev:
ALL Sev:SERIOUS
C:0x24 Q:0x00 K:0x05 S:0xXX Event 100776 Dev:
ALL Sev:SERIOUS
C:0x25 Q:0x00 K:0x05 S:0xXX Event 100876 Dev:
ALL Sev:SERIOUS
C:0x25 Q:0x01 K:0x05 S:0xXX Event 100672 Dev:
DISK Sev:SERIOUS
C:0x26 Q:0x00 K:0x05 S:0xXX Event 100976 Dev:
ALL Sev:SERIOUS
C:0x26 Q:0x01 K:0x05 S:0xXX Event 101076 Dev:
ALL Sev:SERIOUS
C:0x26 Q:0x02 K:0x05 S:0xXX Event 101176 Dev:
ALL Sev:SERIOUS
C:0x26 Q:0x03 K:0x05 S:0xXX Event 101276 Dev:
ALL Sev:SERIOUS
C:0x27 Q:0x00 K:0x05 S:0xXX Event 101376 Dev:
DISK Sev:SERIOUS
C:0x27 Q:0x00 K:0x06 S:0xXX Event 100111 Dev:
ALL Sev:INFO
C:0x27 Q:0x00 K:0x07 S:0xXX Event 100211 Dev:
DISK Sev:INFO
C:0x28 Q:0x00 K:0x06 S:0xXX Event 100108 Dev:
ALL Sev:INFO
C:0x28 Q:0x01 K:0x06 S:0xXX Event 100089
Dev:CHANGER Sev:INFO
C:0x28 Q:0x01 K:0x06 S:0xXX Event 100089 Dev:
ALL Sev:INFO
C:0x29 Q:0x00 K:0x06 S:0xXX Event 100772 Dev:
TAPE Sev:INFO
C:0x29 Q:0x00 K:0x06 S:0xXX Event 100772 Dev:
ALL Sev:SERIOUS
C:0x2a Q:0x00 K:0x06 S:0xXX Event 100021 Dev:
ALL Sev:INFO
C:0x2a Q:0x01 K:0x06 S:0xXX Event 100022 Dev:
ALL Sev:INFO
C:0x2a Q:0x02 K:0x06 S:0xXX Event 100023 Dev:
ALL Sev:INFO
C:0x2b Q:0x00 K:0x06 S:0xXX Event 100054 Dev:
ALL Sev:CRIT
C:0x2c Q:0x00 K:0x06 S:0xXX Event 100150 Dev:
ALL Sev:CRIT
C:0x2c Q:0x00 K:0x0b S:0xXX Event 101476 Dev:
DISK Sev:SERIOUS
C:0x2d Q:0x00 K:0x03 S:0xXX Event 100685 Dev:
TAPE Sev:CRIT
C:0x2f Q:0x00 K:0x06 S:0xXX Event 100132 Dev:
ALL Sev:SERIOUS
C:0x30 Q:0x00 K:0x06 S:0xXX Event 100109 Dev:
ALL Sev:SERIOUS
C:0x30 Q:0x01 K:0x03 S:0xXX Event 100785 Dev:
ALL Sev:SERIOUS
C:0x30 Q:0x01 K:0x06 S:0xXX Event 100208 Dev:
ALL Sev:SERIOUS
C:0x30 Q:0x02 K:0x06 S:0xXX Event 100209 Dev:
ALL Sev:SERIOUS
C:0x30 Q:0x03 K:0x06 S:0xXX Event 100010 Dev:
ALL Sev:SERIOUS
C:0x31 Q:0x00 K:0x03 S:0xXX Event 100038 Dev:
ALL Sev:SERIOUS
C:0x31 Q:0x01 K:0x03 S:0xXX Event 100039 Dev:
ALL Sev:SERIOUS
C:0x32 Q:0x00 K:0xXX S:0xXX Event 100142 Dev:
ALL Sev:CRIT
C:0x32 Q:0x01 K:0x03 S:0xXX Event 100242 Dev:
ALL Sev:SERIOUS
C:0x32 Q:0x02 K:0x03 S:0xXX Event 100342 Dev:
ALL Sev:SERIOUS
C:0x33 Q:0x00 K:0x03 S:0xXX Event 100885 Dev:
TAPE Sev:CRIT
C:0x37 Q:0x00 K:0x06 S:0xXX Event 100133 Dev:
DISK Sev:MAJORWARN
C:0x37 Q:0x00 K:0x06 S:0xXX Event 100133 Dev:
ALL Sev:SERIOUS
C:0x39 Q:0x00 K:0x06 S:0xXX Event 100233 Dev:
DISK Sev:MAJORWARN
C:0x39 Q:0x00 K:0x06 S:0xXX Event 100233 Dev:
ALL Sev:SERIOUS
C:0x3a Q:0x00 K:0x05 S:0xXX Event 101576 Dev:
DISK Sev:MAJORWARN
C:0x3a Q:0x00 K:0x06 S:0xXX Event 100308 Dev:
ALL Sev:INFO
C:0x3b Q:0x00 K:0xXX S:0xXX Event 100258 Dev:
TAPE Sev:CRIT
C:0x3b Q:0x01 K:0x03 S:0xXX Event 100186 Dev:
TAPE Sev:CRIT
C:0x3b Q:0x02 K:0x03 S:0xXX Event 100286 Dev:
TAPE Sev:CRIT
C:0x3b Q:0x08 K:0x04 S:0xXX Event 100187 Dev:
TAPE Sev:CRIT
C:0x3b Q:0x0d K:0x05 S:0xXX Event 100190 Dev:
ALL Sev:CRIT
C:0x3b Q:0x0e K:0x05 S:0xXX Event 100290 Dev:
ALL Sev:CRIT
C:0x3d Q:0x00 K:0x05 S:0xXX Event 101676 Dev:
ALL Sev:SERIOUS
C:0x3e Q:0x00 K:0x02 S:0xXX Event 100027 Dev:
ALL Sev:MINORWARN
C:0x3f Q:0x00 K:0x06 S:0xXX Event 100017 Dev:
ALL Sev:INFO
C:0x3f Q:0x01 K:0x06 S:0xXX Event 100018 Dev:
ALL Sev:INFO
C:0x3f Q:0x02 K:0x06 S:0xXX Event 100019 Dev:
ALL Sev:INFO
C:0x3f Q:0x03 K:0x06 S:0xXX Event 100020 Dev:
ALL Sev:INFO
C:0x40 Q:0x00 K:0x06 S:0xXX Event 100068 Dev:
ALL Sev:CRIT
C:0x41 Q:0x00 K:0x04 S:0xXX Event 100373 Dev:
DISK Sev:CRIT
C:0x41 Q:0x00 K:0x04 S:0xXX Event 100373 Dev:
ALL Sev:CRIT
C:0x42 Q:0x00 K:0x06 S:0xXX Event 100067 Dev:
DISK Sev:CRIT
C:0x42 Q:0x00 K:0x06 S:0xXX Event 100067 Dev:
ALL Sev:CRIT
C:0x43 Q:0x00 K:0x05 S:0xXX Event 101776 Dev:
DISK Sev:SERIOUS
C:0x43 Q:0x00 K:0x05 S:0xXX Event 101776 Dev:
ALL Sev:SERIOUS
C:0x43 Q:0x00 K:0x0b S:0xXX Event 101876 Dev:
DISK Sev:SERIOUS
C:0x44 Q:0x00 K:0x04 S:0xXX Event 100057 Dev:
ALL Sev:CRIT
C:0x45 Q:0x00 K:0x04 S:0xXX Event 100034 Dev:
ALL Sev:CRIT
C:0x46 Q:0x00 K:0x0b S:0xXX Event 100171 Dev:
DISK Sev:MAJORWARN
C:0x46 Q:0x00 K:0x0b S:0xXX Event 100171 Dev:
ALL Sev:MINORWARN
C:0x47 Q:0x00 K:0x06 S:0xXX Event 100170 Dev:
ALL Sev:CRIT
C:0x47 Q:0x00 K:0x0b S:0xXX Event 100270 Dev:
DISK Sev:CRIT
C:0x48 Q:0x00 K:0x06 S:0xXX Event 100002 Dev:
ALL Sev:INFO
C:0x48 Q:0x00 K:0x0b S:0xXX Event 100872 Dev:
DISK Sev:CRIT
C:0x49 Q:0x00 K:0x05 S:0xXX Event 101976 Dev:
DISK Sev:SERIOUS
C:0x49 Q:0x00 K:0x05 S:0xXX Event 101976 Dev:
ALL Sev:SERIOUS
C:0x4a Q:0x00 K:0x06 S:0xXX Event 100250 Dev:
ALL Sev:CRIT
C:0x4b Q:0x00 K:0x06 S:0xXX Event 100252 Dev:
ALL Sev:CRIT
C:0x4c Q:0x00 K:0x06 S:0xXX Event 100049 Dev:
ALL Sev:CRIT
C:0x4e Q:0x00 K:0x06 S:0xXX Event 100232 Dev:
DISK Sev:SERIOUS
C:0x4e Q:0x00 K:0x06 S:0xXX Event 100232 Dev:
ALL Sev:SERIOUS
C:0x4e Q:0x00 K:0x0b S:0xXX Event 102076 Dev:
DISK Sev:CRIT
C:0x50 Q:0x00 K:0x03 S:0xXX Event 100985 Dev:
ALL Sev:CRIT
C:0x50 Q:0x01 K:0x04 S:0xXX Event 100287 Dev:
ALL Sev:CRIT
C:0x50 Q:0x02 K:0x04 S:0xXX Event 100387 Dev:
TAPE Sev:CRIT
C:0x51 Q:0x00 K:0x03 S:0xXX Event 101085 Dev:
ALL Sev:CRIT
C:0x51 Q:0x00 K:0x06 S:0xXX Event 100012 Dev:
ALL Sev:INFO
C:0x52 Q:0x00 K:0x03 S:0xXX Event 101185 Dev:
TAPE Sev:CRIT
C:0x53 Q:0x00 K:0x04 S:0xXX Event 100045 Dev:
ALL Sev:SERIOUS
C:0x53 Q:0x01 K:0x03 S:0xXX Event 100168
Dev:CHANGER Sev:CRIT
C:0x53 Q:0x01 K:0x03 S:0xXX Event 100168 Dev:
ALL Sev:CRIT
C:0x53 Q:0x02 K:0x06 S:0xXX Event 100103 Dev:
ALL Sev:INFO
C:0x57 Q:0x00 K:0x03 S:0xXX Event 100044 Dev:
ALL Sev:CRIT
C:0x58 Q:0x00 K:0x05 S:0xXX Event 102176
Dev:OPTICAL Sev:SERIOUS
C:0x58 Q:0x00 K:0x05 S:0xXX Event 102176 Dev:
ALL Sev:SERIOUS
C:0x59 Q:0x00 K:0x01 S:0xXX Event 100025
Dev:OPTICAL Sev:INFO
C:0x59 Q:0x00 K:0x01 S:0xXX Event 100025 Dev:
DISK Sev:INFO
C:0x59 Q:0x00 K:0x01 S:0xXX Event 100025 Dev:
ALL Sev:MINORWARN
C:0x5a Q:0x00 K:0x06 S:0xXX Event 100004 Dev:
ALL Sev:INFO
C:0x5a Q:0x01 K:0x06 S:0xXX Event 100005 Dev:
ALL Sev:INFO
C:0x5a Q:0x02 K:0x06 S:0xXX Event 100006 Dev:
ALL Sev:INFO
C:0x5a Q:0x03 K:0x06 S:0xXX Event 100007 Dev:
ALL Sev:INFO
C:0x5b Q:0x00 K:0x06 S:0xXX Event 100047 Dev:
ALL Sev:SERIOUS
C:0x5b Q:0x01 K:0x06 S:0xXX Event 100029 Dev:
ALL Sev:MAJORWARN
C:0x5b Q:0x02 K:0x01 S:0xXX Event 100230 Dev:
DISK Sev:SERIOUS
C:0x5b Q:0x02 K:0x06 S:0xXX Event 100330 Dev:
ALL Sev:MAJORWARN
C:0x5b Q:0x03 K:0x06 S:0xXX Event 100031 Dev:
DISK Sev:MAJORWARN
C:0x5b Q:0x03 K:0x06 S:0xXX Event 100031 Dev:
ALL Sev:SERIOUS
C:0x5c Q:0x00 K:0x06 S:0xXX Event 100024 Dev:
DISK Sev:INFO
C:0x5c Q:0x00 K:0x06 S:0xXX Event 100024
Dev:OPTICAL Sev:INFO
C:0x5c Q:0x00 K:0x06 S:0xXX Event 100024 Dev:
ALL Sev:INFO
C:0x5c Q:0x01 K:0xXX S:0xXX Event 100203 Dev:
DISK Sev:INFO
C:0x5c Q:0x01 K:0xXX S:0xXX Event 100203
Dev:OPTICAL Sev:INFO
C:0x5c Q:0x01 K:0xXX S:0xXX Event 100203 Dev:
ALL Sev:INFO
C:0x5c Q:0x02 K:0x06 S:0xXX Event 100048 Dev:
ALL Sev:MINORWARN
C:0x5d Q:0x00 K:0x01 S:0xXX Event 100972 Dev:
DISK Sev:SERIOUS
C:0x63 Q:0x00 K:0x06 S:0xXX Event 100333 Dev:
CDROM Sev:SERIOUS
C:0x63 Q:0x00 K:0x06 S:0xXX Event 100333 Dev:
ALL Sev:SERIOUS
C:0x64 Q:0x00 K:0x05 S:0xXX Event 102276 Dev:
CDROM Sev:SERIOUS
C:0x64 Q:0x00 K:0x05 S:0xXX Event 102276 Dev:
ALL Sev:SERIOUS
C:0x80 Q:0x01 K:0x06 S:0xXX Event 102376 Dev:
DISK Sev:CRIT
C:0xXX Q:0xXX K:0x00 S:0xXX Event 100201 Dev:
ALL Sev:INFO
C:0xXX Q:0xXX K:0x01 S:0xXX Event 102026 Dev:
ALL Sev:MINORWARN
C:0xXX Q:0xXX K:0x02 S:0xXX Event 101072 Dev:
ALL Sev:CRIT
C:0xXX Q:0xXX K:0x03 S:0xXX Event 101137 Dev:
ALL Sev:CRIT
C:0xXX Q:0xXX K:0x04 S:0xXX Event 100251 Dev:
ALL Sev:CRIT
C:0xXX Q:0xXX K:0x05 S:0xXX Event 102476 Dev:
ALL Sev:SERIOUS
C:0xXX Q:0xXX K:0x06 S:0xXX Event 100091 Dev:
TAPE Sev:INFO
C:0xXX Q:0xXX K:0x06 S:0xXX Event 100091 Dev:
ALL Sev:SERIOUS
C:0xXX Q:0xXX K:0x07 S:0xXX Event 100311 Dev:
ALL Sev:INFO
C:0xXX Q:0xXX K:0x08 S:0xXX Event 100092 Dev:
CDROM Sev:SERIOUS
C:0xXX Q:0xXX K:0x08 S:0xXX Event 100092 Dev:
WORM Sev:SERIOUS
C:0xXX Q:0xXX K:0x08 S:0xXX Event 100092 Dev:
DISK Sev:SERIOUS
C:0xXX Q:0xXX K:0x08 S:0xXX Event 100092 Dev:
ALL Sev:SERIOUS
C:0xXX Q:0xXX K:0x09 S:0xXX Event 102576 Dev:
ALL Sev:SERIOUS
C:0xXX Q:0xXX K:0x0a S:0xXX Event 100193 Dev:
ALL Sev:SERIOUS
C:0xXX Q:0xXX K:0x0b S:0xXX Event 100271 Dev:
DISK Sev:SERIOUS
C:0xXX Q:0xXX K:0x0b S:0xXX Event 100271 Dev:
ALL Sev:CRIT
C:0xXX Q:0xXX K:0x0c S:0xXX Event 100301 Dev:
ALL Sev:INFO
C:0xXX Q:0xXX K:0x0d S:0xXX Event 100293 Dev:
DISK Sev:SERIOUS
C:0xXX Q:0xXX K:0x0d S:0xXX Event 100293 Dev:
ALL Sev:SERIOUS
C:0xXX Q:0xXX K:0x0e S:0xXX Event 100294 Dev:
ALL Sev:CRIT
C:0xXX Q:0xXX K:0xXX S:0x00 Event 100401 Dev:
ALL Sev:INFO
C:0xXX Q:0xXX K:0xXX S:0x02 Event 102676 Dev:
ALL Sev:SERIOUS
C:0xXX Q:0xXX K:0xXX S:0x04 Event 100501 Dev:
ALL Sev:INFO
C:0xXX Q:0xXX K:0xXX S:0x08 Event 100100 Dev:
ALL Sev:MAJORWARN
C:0xXX Q:0xXX K:0xXX S:0x10 Event 100095 Dev:
ALL Sev:INFO
C:0xXX Q:0xXX K:0xXX S:0x14 Event 100096 Dev:
ALL Sev:INFO
C:0xXX Q:0xXX K:0xXX S:0x18 Event 100097 Dev:
ALL Sev:MAJORWARN
C:0xXX Q:0x00 K:0xXX S:0x22 Event 100098 Dev:
ALL Sev:INFO
C:0xXX Q:0xXX K:0xXX S:0x28 Event 100099 Dev:
ALL Sev:MAJORWARN
C:0x00 Q:0x00 K:0x00 S:0xXX Event 100999 Dev:
ALL Sev:SERIOUS